• The korean journal of orthodontics
• /
• v.34 no.3 s.104
• /
• pp.253-260
• /
• 2004

Frictional force between the orthodontic bracket and arch wire during sliding tooth movement is related to many factors, such as the size, shape and material of both the bracket and wire, ligation method and the angle formed between the bracket and wire. There have been clear conclusions drawn in regard to most of these factors, but as to the effect of bracket width on frictional force there are only conflicting studies. This study was designed to investigate the effect of bracket width on the amount of frictional forces generated during clinically simulated tooth movement. Three different widths of brackets $(0.018{\times}0.025'\;standard)$ narrow (2.40mm), medium (3.00mm) and wide (4.25mm) were used in tandem with $0.016{\times}0.022'$ stainless steel wire. Three bracket-arch wire combinations were drawn on for 4 minutes on a testing apparatus with a head speed of 0.5mm/min and tested 7 times each. To reproduce biological conditions, dentoalveolar models were designed with indirect technique using a material with similar elastic properties as periodontal ligament (PDL). In addition, to minimize the effect of ligation force, elastomer was used with added resin, which was attached to the bracket to make up for the discrepancies of bracket width. The results were as follows: 1. Maximum frictional force for each bracket-arch wire combination was: Narrow (2.40mm): $68.09\pm4.69gmf$ Medium (3.00mm): $72.75\pm4.98 gmf$ Wide (4.25mm): $72.59\pm4.54gmf$ 2. Frictional force was increased with more displacement of wire through the bracket slot. 3. The ANOVA psot-hoc test showed that the bracker width had no significant effect on frictional force when tested under clinically simulated conditions(p>0.05).

• Korea and Global Affairs
• /
• v.1 no.2
• /
• pp.171-208
• /
• 2017

This paper is to analyze the type characteristics and prospects of the North Korean nuclear strategy. To this end, the paper is composed of 5 chapters titled introduction; the concept and type of nuclear strategy; the nuclear capabilities of North Korea and the declarative nuclear strategy; the operational characteristics and prospects of the North Korean nuclear strategy; and conclusion. Recently, the deployment of nuclear weapons and the enhancement of nuclear capabilities in North Korea have raised serious problems in our security and military preparedness. Nuclear strategy means military strategy related to the organization, deployment and operation of nuclear weapons. The study of North Korea's nuclear strategy begins with a very realistic assumption that the nuclear arsenal of North Korea has been substantiated. It is a measure based on North Korea's nuclear arsenal that our defense authorities present the concepts of preemptive attack, missile defense, and mass retaliation as countermeasures against the North Korean nuclear issue and are in the process of introducing and deploying them. The declared nuclear declaration strategy of the DPRK is summarized as: (1)Nuclear deterrence and retaliation strategy under the (North Korea's) Nuclear Weapons Act, (2)Nuclear preemptive aggression, (3)The principle of 'no first use' of nuclear weapons in the 7th Congress. And the intentions and operational characteristics of the North Korean nuclear strategy are as follows: (1)Avoiding blame through imitation of existing nuclear state practices, (2)Favoring of nuclear strategy through declarative nuclear strategy, (3)Non-settlement of nuclear strategy due to gap between nuclear capability and nuclear posture. North Korea has declared itself a nuclear-weapon state through the revised Constitution(2012.7), the Line of 'Construction of the Nuclear Armed Forces and the Economy'(2013.3), and the Nuclear Weapons Act(2013.4). However, the status of "nuclear nations" can only be granted by the NPT, which is already a closed system. Realistically, a robust ROK-US alliance and close US-ROK cooperation are crucial to curbing and overcoming the North Korean nuclear threat we face. On this basis, it is essential not only to deter North Korea's nuclear attacks, but also to establish and implement our own short-term, middle-term and long-term political and military countermeasures for North Korea's denuclearization and disarmament.

• Korean Security Journal
• /
• no.48
• /
• pp.259-285
• /
• 2016

As the need for anti-terrorism legislation has been continuously argued, Anti-terrorism act has been enacted and enforced. On the other hand, there still remain a lot of points to be discussed regarding the definition of the concept of terrorism, matters of human rights violations, strengthening authority of the investigation and intelligence agencies, and mobilization military forces for the suppression of terrorism. Also, reviewing Anti-terrorism act and its enforcement ordinance draft, this legislation seems to regulate terrorist groups like IS. If so, in the case of terrorism of North Korea or domestic anti-government organizations, whether this law would be applied could become an issue. In the case of terrorism of North Korea, Ministry of National Defense has a right of commandership in the military operations, however, it is also possible to apply the article 4 of Natural Security Act a crime of performing objective-or a crime of foreign exchange on Criminal law as legal grounds for not military terrorisms but general investigations. Therefore, it is necessary to involve consideration about this matter. Furthermore, in the view of investigation, Anti-terrorism act and its enforcement ordinance draft do not mention Supreme Prosecutors Office and Ministry of Justice that conduct investigations. In the case of terrorism, the police and prosecution should conduct to arrest criminals and determine crimes at the investigation stage, however, any explicit article related to this content in Anti-terrorism act and its enforcement ordinance draft was unable to be found. Although Anti-terrorism act is certainly toward preventive aspects, considering some matters such as prevention, actions on the scene, maneuver after terrorism, arresting terrorists, investigation direction, cooperation, and mutual assistance, it is necessary to reflect these contents in Anti-terrorism act. In other words, immediately after terrorists attacks, it is possible to mobilize the military operations by Integrated Defense act in order to arrest them in the case of military terrorism. Nevertheless, because both military terrorism and general one are included in the investigation stage, it needs to begin an investigation under the direction of the prosecution. Therefore, above all, a device for finding out the truth behind the case at the investigation stage is not reflected in the current Anti-terrorism act and its enforcement ordinance draft. Accordingly, if National Intelligence Service approaches information at the prevention level in this situation, it may be necessary to come up with follow-up measures of the police, the prosecution, and military units.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.207-216
• /
• 2007

The purpose of this study was to biomechanical analysis Judo's Kuzushi throwing motion in order to increase the effectiveness of Nage-waja(throwing technique). The Tori was a Judo player with 18 years experience(4th degree) while the Uke was a player with 2 years experience(1st degree). The kinematic data was captured using the Vicon motion system (7 cameras) and the kinetics were recorded by force plates(2 AMTI). The following were the results; While leaning to the front the subject's trunk's angle was $14.5^{\circ}$, the lower limbs angle was $23.8^{\circ}$, knee angle was $179.6^{\circ}$ and the vertical reaction of the left leg was 325.42N(BW 0.34) and the right leg was 233.7N(BW 0.47). While leaning back the subject's trunk's angle was $11.3^{\circ}$, the lower limbs angle was $4.1^{\circ}$, knee angle was $1761^{\circ}$ and the vertical reaction of the left leg was 299.53N(BW 0.43) and the right leg was 441.7N(BW 0.64). While leaning to the left the subject's trunk's angle was $30.8^{\circ}$, the lower limbs angle was $2.7^{\circ}$, knee angle was $175.2^{\circ}$ and the vertical reaction of the left leg was 711N(BW 1.03) and the right leg was 9.2N(BW 0.01). While leaning to the right the subject's trunk's angle was $36.5^{\circ}$, the lower limbs angle was $10.4^{\circ}$, knee angle was $175.2^{\circ}$ and the vertical reaction of the left leg was 13.2N(BW 0.02) and the right leg was 694.7N(BW 1.01). While leaning to the left front corner the subject's trunk's angle was $19.8^{\circ}$ (front) and $15.1^{\circ}$ (left), the lower limbs angle was $17.8^{\circ}$ (front) and $2.4^{\circ}$ (left), knee angle was $177.8^{\circ}$ (front) and $173.9^{\circ}$(left), and the vertical reaction of the left leg was 547.4N(BW 0.8) and the right leg was 117.8N(BW 0.17). While leaning to the right front corner the subject's trunk's angle was $15.4^{\circ}$ (front) and $17.7^{\circ}$ (right), the lower limbs angle was $21.1^{\circ}$, (front) and $5.7^{\circ}$ (right), knee angle was $175.5^{\circ}$ (front) and $178.9^{\circ}$(right), and the vertical reaction of the left leg was 53N(BW 0.08) and the right leg was 622.4N(BW 09). While leaning to the left rear corner the subject's trunk's angle was $9.2^{\circ}$ (back) and $13.8^{\circ}$ (left), the lower limbs angle was $2^{\circ}$, (back) and $5.7^{\circ}$ (left), knee angle was $175.5^{\circ}$ (back) and $172.8^{\circ}$(left), and the vertical reaction of the left leg was 698.2N(BW 1.02) and the right leg was 49.6N(BW 0.07). While leaning to the right rear corner the subject's trunk's angle was $8.9^{\circ}$ (back) and $19.6^{\circ}$ (right), the lower limbs angle was ${0.6^{\circ}}_"$ (back) and $3.1^{\circ}$ (right), knee angle was $174.6^{\circ}$ (back) and $175.6^{\circ}$(right), and the vertical reaction of the left leg was 7.2N(BW 0.01) and the right leg was 749.4N(BW 1.09). It was observed that during the Judo motion Kuzushii the range of the COM varied from $26.5{\sim}39.9cm$. It was concluded that the upper body leaned further than the lower body as there was knee extension. There was high left leg reaction forces while leaning to the left and likewise for the right side. It was therefore deduced that the Kuzushi was a more effective throwing technique for the left side.

• Korean journal of communication and information
• /
• v.17
• /
• pp.112-144
• /
• 2001

This study attempts to analyze how and why Chosun Ilbo and Hankyoreh Shinmun produce particular social discourses about the media reform in different ways. In doing so, this paper attempts to disclose the ideological nature of media reform discourses in social contexts. For the purpose, a content analysis method was applied to the analysis of straight news, while an interpretive discourse analysis was appled to analyze both editorials and columns in newspapers. As a theoretical framework, an articulation theory was applied to explain the relationships among social forces, ideological elements, discourse practices and subjects to produce the media reform discourses. In doing so, I attempted to understand the overall conjuncture of the media reform aspects in social contexts. The period for the analysis was limited from January 10th to August 10th this year. Newspaper articles related to the media reform were obtained from the database of newspaper articles, "KINDS," produced by Korean Press Foundation, in searching the key word, "media reform". Total articles to be analyzed were 765, 429 from Hankyoreh Sinmun and 236 from Chosun Ilbo. The research results, first of all, empirically show that both Chosun Ilbo and Hankure Synmun used straight news for their firms' interests and value judgement, in selecting and excluding events related to media reform or in exaggerating and reducing the meanings of the events, although there are differences in a greater or less degree between two newspaper companies. Accordingly, this paper argues that the monopoly of newspaper subscriber by three major newspapers in Korean society could result in the forming of one-sided social consensus about various social issues through the distorting and unequal reporting by them. Second, this paper's discourse analysis related to the media reform indicates that the discourse of ideology confrontation between the right and the left produced by Chosen Ilbo functioned as a mechanism to realize law enforcement of the right in articulating the request of media reform and the anti-communist ideology. It resulted in the discursive effect of suppressing the request of media reform by civic groups and scholars and made many people to consider the media reform as a ideological matter in Korean society.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.5
• /
• pp.583-594
• /
• 2000

Dislodgement of a crown or extension bridge and the loosening of a retainer of a bridge is a serious clinical problem in fixed restoration. Generally these problems are considered to be associated with deformation of the restoration. During biting, the restoration is subjected to complex forces and deforms considerably within the limit of its elasticity. Deformation of the restoration under the occlusal force induces excessive stress in the cement film, which then leads to the cement fracture. Such a fracture may eventually cause loss of the restoration. Because most of the past retention tests for full veneer crown were done without fatigue loading, they were not exactly simulating intraoral environment. And the purpose of this study was to evaluate the effect of cyclic cantilever loading on the retentive strength of full veneer crowns depending on different type of cements and taper of prepared abutment. Steel dies with $8^{\circ}\;or\;16^{\circ}$ convergence angle were fabricated through milling and crowns with the same method. These dies and crowns were divided into 8 groups. Group 1 : $16^{\circ}$ taper die, cementation with zinc phosphate cement, without loading Group 2 : $16^{\circ}$ taper die, cementation with zinc phosphate cement, with loading Group 3 : $8^{\circ}$ taper die, cementation with zinc phosphate cement, without loading Group 4 : $8^{\circ}$ taper die, cementation with zinc phosphate cement, with loading Group 5 : $16^{\circ}$ taper die, cementation with Panavia 21, without loading Group 6 : $16^{\circ}$ taper die, cementation with Panavia 21, with loading Group 7 : $8^{\circ}$ taper die, cementation with Panavia 21 without loading Group 8 : $8^{\circ}$ taper die, cementation with Panavia 21, with loading After checking the fit of die and crown, the luting surface of dies and inner surface of crowns were air-abraded for 10 seconds. The crowns were cemented to the dies, with cements mixed according to the manufacturer's recommendations. A static load of 5kg was then applied for 10 minutes with static loading device. Twenty-four hours later, group 1, 3, 5, 7 were only thermocycled, group 2, 4, 6, 8 were subjected to cyclic loading after thermocycling. Retentive tests were performed on the Instron machine. From the finding of this study, the following conclusions were obtained 1. Panavia 21 showed significantly higher retentive strength than zinc phosphate cement for all groups (p<0.05). 2. There was a significant difference in the retentive strength between $8^{\circ}\;and\;16^{\circ}$ taper for zinc phosphate cement(p<0.05), but no significant difference for Panavia 21 (p>0.05). 3. Cyclic loading significantly decreased the retentive strength for all groups(p<0.05). 4. For zinc phosphate cement, there was 35% reduction of the retentive strength after loading in the $16^{\circ}$ taper die, 25% in the $8^{\circ}$ taper die, and for Panavia 21, 21% in the $16^{\circ}$ taper die, 18% in the $8^{\circ}$ taper die.

• Journal of Technologic Dentistry
• /
• v.31 no.1
• /
• pp.37-54
• /
• 2009

The purpose of this thesis is to address the imbalance between supply and demand of dental lab technicians and to propose its solutions by analyzing the improvement of employment rate of graduates of dental technology schools in Daegu area and the supply and demand of the technician workforce. Preliminary and full-scale surveys were performed from Aug. 10 to Oct. 10 in 2008 on 150 junior students of dental technology schools who finished their on-the-job-training and 150 dental technicians who were working for dental laboratory in Daegu by self-assessment questionnaire. Followings are the findings of this study. First, regarding the gender of the dental technicians, 32.7% of respondents were female 67.3% were male. Concerning age, respondents younger than 29 years-old occupied the highest percentage(39.3%). With respect to the lab technology school they graduated, DaeguHealthCollege took the largest proportion of 87.3%. With regard to interpersonal relationship at the school, 58.0% of respondents felt their relationship 'smooth'. Second, about the motive of choosing to be a lab technician, the biggest proportion of the respondents(34.7%) replied that 'because it is professional'. Regarding the degree of satisfaction about the profession, 'so-so' was the answer with the biggest percentage(51.3%) followed by 'satisfied'(32.0%) and 'unsatisfied'(16.7%). It showed that respondents were generally satisfied with their major. Third, regarding relevance of on-the-job-training with 'preparation for the employment', highest percentage of both students and lab technicians(50.0%) replied 'so-so'. With respect to 'necessity of practical education', highest percentage of the students and lab technicians replied 'relating didactic education in college to the real world' with 52.7% and 40.7% respectively. With regard to 'the aim of on-the-sport-training', 'practical training of didactic education' was chosen by 54.0% and 47.3% respectively. Fourth, with regard to the 'types of college education advantageous for the employment', both students and lab technicians groups chose 'practical training' with the highest percentage. Concerning 'helpfulness of clinical training on employment', students answered 'so-so' and 'helpful' by 50.0% and 42.7% respectively and dental technicians replied similarly by 50.0% and 46.0% respectively. Fifth, with regard to the influence of financial factors on the supply and demand of dental technician(question #1), 68.0% of respondents agreed that 'salary plays key role in the supply and demand of the work force'. Concerning the question about working condition, respondents requested better working environment. With reference to interpersonal relationship at the laboratory, respondents replied that interpersonal relationship affects the duration of the employment it was found out that there were many conflicts with colleagues or dental office. Sixth, regarding the satisfaction about their profession according to the characteristics of the respondents more respondents were 'satisfied'(10.30 points) with their profession and 'unsatisfied' were 9.47 points and the difference was statistically significant(p<0.05). According to the findings of this study, practical education on campus and on-the-job-training are as important as didactic education at class due to the characteristics of dental technology major. It was found that more practical training is related to higher employment rate. Therefore, efficiency of on-the-job-training by college education should be increased raise employment rate of the graduates and reduce the unemployment. Up-to-date information needs to be promptly delivered and future vision should be presented to the students to raise their satisfaction about the profession. In addition, to reduce dental technician's frequent change of their workplace after facing with the reality of the profession after graduation, related organizations should make an effort to present better future than now.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.2
• /
• pp.63-75
• /
• 2013

The Inner Port Phase 2 area of the Pyeongtaek-Dangjin Port is enclosed by a total of three permeable sea-walls, and the disposal site to the east of the Inner Port Phase 2 is also enclosed by two permeable sea-walls. The maximum tidal range measured in the Inner Port Phase 2 and in the disposal site in May 2010 is 4.70 and 2.32 m, respectively. It reaches up to 54 and 27%, respectively of 8.74 m measured simultaneously in the exterior. Regression formulas between the difference of hydraulic head and the rate of interior water volume change, are induced. A three-dimensional numerical hydrodynamic model for the Asan Bay is constructed incorporating a module to compute water discharge through the permeable sea-walls at each computation time step by employing the formulas. Hydrodynamics for the period from 13th to 27th May, 2010 is simulated by driving forces of real-time reconstructed tide with major five constituents($M_2$, $S_2$, $K_1$, $O_1$ and $N_2$) and freshwater discharges from Asan, Sapkyo, Namyang and Seokmoon Sea dikes. The skill scores of modeled mean high waters, mean sea levels and mean low waters are excellent to be 96 to 100% in the interior of permeable sea-walls. Compared with the results of simulation to obstruct the flow through the permeable sea-walls, the maximum current speed increases by 0.05 to 0.10 m/s along the main channel and by 0.1 to 0.2 m/s locally in the exterior of the Outer Sea-wall of Inner Port. The maximum bottom shear stress is also intensified by 0.1 to 0.4 $N/m^2$ in the main channel and by more than 0.4 $N/m^2$ locally around the arched Outer Sea-wall. The module developed to compute the flow through impermeable seawalls can be practically applied to simulate and predict the advection and dispersion of materials, the erosion or deposion of sediments, and the local scouring around coastal structures where large-scale permeable sea-walls are maintained.

• Archives of design research
• /
• v.11 no.2
• /
• pp.31-45
• /
• 1998

Human beings receive experiences and education in viewing and manipulating objects since birth, These experiences in forms and colours influence signifrcantty the formation of the person's humanity, sensibility and constituOOn until he becomes an adult. Considering that all objects coexist through space and time with human beings from birth to an adulthood, we can imagine how these things shape a person, Human beings' perception of form and colour might be different according to the person's living environment, experiences, education, age and job, However, when we see there are certain kinds of form and colour of that most people favor, we can understand that human beings have a certain inherent feelings about forms and colours, Let's suppose a man faces an object that dosen't correspond with his basic feelings about form and colour, He would avoid that object at least unconsoousty, All of his acts dealing with form and colour probably satisfy a desire for beauty which can be required from certain proper forms and colours, By revealing the feelings about forms and colours that human beings originally have, this study is going to explore what kinds of form and colour have what kinds of psychological and physical influences on human beings. Another purpose of this study is to be a theory suggesting more profitable and effective forms and colours psychologically and physically to the consumer. this study demonstrates that the basic feelings about forms and colours which human beings possess are different according to the individual's psychology and the body's condition. It also establishes the reality of the principle of how human psychology and the body change according to the surrounding environment. Finally, it will be appropriate for the suggested theory from this study to be used as fundamental material in deciding the forms and colours used in the design field in the future in that these forms and colours are more profitable and efftient.

• Journal of Animal Science and Technology
• /
• v.46 no.3
• /
• pp.405-414
• /
• 2004

This study evaluated the effects of preslaughter feed withdrawal and chiller ageing on objective meat quality traits in longissimus dorsi (LD), biceps femoris(BF), and triceps brachii(TB) muscles of Korean native black pigs. Twenty males were assigned into a 2(pre-slaughter feeding) ${\times}$ 2(pre-slaughter stress) ${\times}$ 4(chiller ageing) factorial. Pre-slaughter fasting for 18 h resulted in significantly(P < 0.05) higher pHs at 1.5 h for both LD and BF. On the other hand, muscle temperature did not differ between the fasted and fed animals. The result implied that pigs with different pre-slaughter feedings experienced different pH-temperature profiles during rigor development. This was reflected by the significan(P < 0.05) increase in cooking loss and hunter $L^*$ for LD of the fed pigs. However, WB-shear force of LD was not affected by the treatment. Furthermore, objective meat quality of BF and TB did not differ between the treatments. Hunter $L^*$ value and cooking loss for LD were constant for 7 d, followed by a significant(P < 0.05) increase at 14 d. BF and TB had significantly(P < 0.05) higher hunter $L^*$ value and cooking loss at 14 d than at 1 d. Significant(P < 0.05) linear reductions in LD WB-shear force took place from 1 to 7 d, while BF and TB WB-shear forces were significantly (P < 0.05) reduced at 14 d. Simple correlation for WB-shear force between LD and BF, and between LD and TB indicated that 6 kg of shear force for LD was equivalent to approximately 3.5 and 6 kg for TB and BF, respectively. On the basis of the current result, feeding until the morning of slaughter appeared to contribute to favourable meat color for LD. However, negative effect on palatability due to increase in cooking loss should be taken into account. A 7-d chiller ageing was likely the best practice for LD, while TB appeared not to require chiller ageing. A 14-d ageing could improve the tenderness of BF, but could likely reduce juiciness.