• 한국항해학회지
• /
• 제9권1호
• /
• pp.95-109
• /
• 1985

It has been generally known that the chattering of an AC electromagnetic contactor due to the fluctuation of attracting force is the primary cause of its abrasion and noise. To reduce this chattering effect, an AC electromagnetic contactor is mostly fitted with a shading coil which works the role to make difference in phases of two distinct components of attracting force. The theoretical interpretation of an AC electromagnetic contactor with shading coil and the equation of its attracting force per unit wattage consumed have already been proposed, however, few explications so far have been made on the determination of optimal circuit constants of shading coil. In this paper, the auther constructs a circuit model of an AC electromagnetic contactor with shading coil which is based on the theoretical interpretation of shading coil examined to be valid by experiments under some assumptions, and defines the equation of attracting force without chattering per unit wattage consumed as a performance function for determining the optimal circuit constants of shading coil. And then, the optimal circuit constants maximizing the performance function are determined by means of computer simulation founded on the above circuit model and the characteristics of those circuit constants are examined with special attention to the coupling coefficient.

• 한국항해학회지
• /
• 제6권2호
• /
• pp.35-55
• /
• 1982

The attempt of this paper is to examine the basic theory on the analysis of the effect of a shading coil fitted to an electromagnetic contactor, and to compare experimentally the attracting force of an AC electromagnetic contactor with that of a DC electromagnetic contactor, with varying the airgap length. Equations are also proposed for calculating the AC and DC attracting force per unit consumption wattage by using the circuit constants measured from the experiment, and these calculated attracting forces are compared with those actulally measured, and then, the experimental contactor is examined in the view of its design. The calculated attracting forces are appeared to coincide well with the measured ones and the experimental contactor fitted with shading coil is revealed not so well designed for reducing the fluctuation of the attracting force.

• 전기학회논문지P
• /
• 제58권2호
• /
• pp.158-163
• /
• 2009

A shading ring in an AC solenoid plays an important role in reducing vibration and humming sound. Estimation of performance of the shading ring placed in a stator pole of the AC solenoid is not an easy task due to the difficulty in measurement of the current and flux linkage of the shading ring. In this paper, dynamic performance of an AC solenoid with a shading ring is analyzed through the simulation using electromagnetic analysis software and the results are verified by simple AC and DC voltage tests. Both the simulation and experimental results show that the shading ring in the AC solenoid not only increases pull force, but also reduces operation time, vibration and humming sound.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2008년도 학술대회 1부
• /
• pp.590-594
• /
• 2008

근래에 인간과 컴퓨터의 상호작용을 통하여 사용자에게 직관적인 정보를 제공하는 기술들이 발전하고 있으며, 그래픽 기술의 비실사 렌더링을 이용한 미술 기법을 사실감 있게 가상 체험하기 위한 어플리케이션이 제안되고 있다. 본 논문은 미술 기법 중 방망이를 이용한 탁본 기법을 가상의 환경에서 모사하기 위해 탁본의 방망이를 통한 힘 쉐이딩을 새롭게 고안하여 제안한다. 햅틱 커서의 포인트와는 달리 탁본 방망이의 면적이 접촉하는 부분에서 생기는 문제점을 해결하기 위하여 Height map으로 사용된 Canny Edge Detection 이미지를 통해 Height map을 부분적으로 재 정의하고 힘의 계산에 적용하여 충돌된 방망이의 힘 쉐이딩을 가능하게 하는 것이 원리이다. 그래픽 렌더링 효과와 함께 실시간으로 사용자에게 햅틱 장치를 이용하여 촉감 정보를 전달함으로써 다양한 미술 교육적 효과를 체험할 수 있는 방안을 제공할 것으로 기대된다.

• 환경생물
• /
• 제34권4호
• /
• pp.264-271
• /
• 2016

본 연구는 엽록소 형광반응 (OJIP)분석을 통해 차광처리에 따른 정원 식물의 광 이용효율을 평가 및 분석하고자 하였다. 10종의 정원식물을 대상으로 50% 및 80% 차광 조건에서 엽록소 형광반응 분석을 실시하였으며, 75일 차광조건에서 가장 낮은 광이용 효율을 보였다. 차광처리 시 광계II 전자전달에너지플럭스 ($ET2_O/RC$)는 증가 경향을 보였으나 광계I 전자전달에너지플럭스($RE1_O/RC$) 및 PI 등 광이용 효율이 감소하였다. 본 연구를 통하여 광화학 매개변수 중 $F_V$, $FV/F_O$, $RE1_O/RC$, $ET2_O/RC$, $PI_{TOTAL\;ABS}$, $DF_{TOTAL\;ABS}$ 등 19개 parameter가 광화학 반응의 효율을 나타내는 중요한 요인으로 판단되었다. SFI평가를 통해 10종의 정원식물 중 수호초(I), 꽃범의꼬리(II), 무늬사초(II)등 3종의 식물이 내음성이 강한 것으로 판단되었다. 따라서 광화학 반응에 근거한 일조 스트레스지수(SFI)는 정원식물의 내음성 평가에 유용한 것으로 사료된다.

• 대한치과보철학회지
• /
• 제26권1호
• /
• pp.51-61
• /
• 1988

The recently introduced castable glass ceramics incorporate properties characteristic of natural teeth and they are regarded as an ideal material to restore lost tooth structure. The purpose of this study was to compare the marginal fit of castable ceramic crown with that of the metal-ceramic crown in the process of heat treatment. Two master dies for castable ceramic crowns and metal-ceramic crowns were fabricated from being cast with the base metal. Each master die was duplicated with addition silicone and hard stone. Ten castable ceramic crowns were made on each hard stone die and their marginal openings were measured three times first, after casting; second, after ceramming; third, after shading. The other ten metal-ceramic crowns were made on each hard stone die and their marginal openings were measured three times : first, after casting; second, after degassing; third, after porcelain veneering. Each crown was seated on its master die with the constant force delivered by loading jig. And then, marginal openings were measured on four locations by optical projector at X50 magnification. The results were as follows: 1. The mean marginal openings of castable ceramic crowns were $31.1{\pm}12.7{\mu}m$ after casting; $44.6{\pm}12.8{\mu}m$ after ceramming; $51.2{\pm}16.8{\mu}m$ after shading. 2. The mean marginal openings of the metal-ceramic crowns were $26.2{\pm}13.8{\mu}m$ after casting; $29.8{\pm}10.3{\mu}m$ after degassing; $38.0{\pm}14.5{\mu}m$ after porcelain veneering. 3. There was significant increase in the marginal opening of castable ceramic crowns after ceramming, while metal-ceramic crowns sho(wed significant increase after porcelain veneering (p<0.05). 4. Marginal fit of metal-ceramic crown was better than that of castable ceramic crown (p<0.01).

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.413-417
• /
• 1997

Distributed piezoelectric sensor and actuator have been designed for efficient vibration control of a cantilevered beam. Both PZT and PVDF are used in this study, the former as an actuator and the latter as a sensor for our integrated structure. For the PZT actuator, the position and size have been optimized. Optimal electrode shape of the PVDF sensor has been determined. For multi-mode vibration control, we have used two PZT actuators and a PVDF sensor. Electrode shading of PVDF is more powerful for modal force adjustment than the sizing and positioning of PZT. Finite element method is used to model the structure that includes the PZT actuator and the PVDF sensor. By deciding on or off of each PZT segment, the length and the location of the PZT actuator are optimize. Considering both of the host structure and the optimized actuators, it is designed that the active electrode width of PVDF sensor along the span of the beam. Actuator design is based on the criterion of minimizing the system energy in the control modes under a given initial condition. Sensor is designed to minimize the observation spill-over. Modal control forces for the residual(uncontrolled) modes have been minimized during the sensor design. Genetic algorithm, which is suitable for this kind of discrete problems, has been utilized for optimization. Discrete LQG control law has been applied to the integrated structure for real time vibration control. Performance of the sensor, the actuator, and the integrated smart structure has been demonstrated by experiments.

• 한국작물학회지
• /
• 제64권2호
• /
• pp.152-158
• /
• 2019

본 연구는 논 직파재배 인삼포에서 발생되는 월동병해의 경종적 방제기술 개발과 효과를 구명하기 위하여 실험하였던 바, 얻어진 결과를 요약하면 다음과 같다. 인삼포장의 월동기간동안에 발생하는 부패의 원인은 Botrytis cinerea 균에 의한 잿빛곰팡이병으로, 10월이나 11월에 발생되며 이듬해 2, 3월에 집중적으로 발생하는 경향을 보였다. 해가림 자재별 잿빛곰팡이병 발생은 차광지 해가림에서 6.5%, PE차광망은 16.8% 및 볏짚 해가림자재는 29.5% 순으로 발생하였고, 잿빛곰팡이병균의 감염은 월동 전에 잎에 감염되고, 이후 줄기로 2차감염이 이루어지는 것으로 나타났다. 인삼 지상부의 잿빛곰팡이병 균핵형성은 10월 20일에 26.6%, 11월 20일에 33.7%, 12월 20일에는 41.8%로 증가되는 경향이었다. 고사한 인삼의 잎과 줄기를 제거하는데 필요한 힘은 1, 2년생은 각각 0.2 kg, 0.94 kg, 3년생은 2.5 kg, 4년생 및 5년생은 5 kg의 많은 힘이 필요하였고, 월동 후에는 1 kg 내외로 쉽게 탈락되어 제거가 가능하였다. 년생별로 잎과 줄기 제거 후 병 발생율은 4, 5, 6년생에서 각각 2.5%, 1.2% 및 2.2% 의 병 발생주율을 보인 반면, 무제거시에는 8.8%, 13.0% 및 18.2%의 높은 병 발생주율을 보였다. 이식재배포장과 직파재배포장 모두 해가림자재를 걷어 놓은 경우, 두둑상면에 복토나 비닐을 피복한 경우 결주율이 감소되고, 출아본수는 증가하였다.

• 원예과학기술지
• /
• 제29권3호
• /
• pp.195-200
• /
• 2011

여름철 고품질 돌나물(Sedum samentosum)을 생산하기 위하여, 4지역의 수집종에 대한 토경재배와 NFT 수경재배에 따른 생육특성, 수량 및 품질, 비타민 C와 무기성분 함량등을 조사하였다. 초장은 18.4-21.8cm 범위로 재배방식 간에 유의한 차이를 보이지 않았다. 개체당 신초수, 엽장, 엽폭, 엽수, 생체중 및 건물중 등은 토경재배보다 수경재배에서 유의한 증가를 보였으며, '군산', '완도' 수집종에서 단위면적당 생체중 및 건물중이 높았다. 줄기두께는 수경재배보다 토경재배에서 증가하였으며, 수집종간에도 유의한 차이를 보였다. 줄기의 경도는 수경재배($1.3kg{\cdot}cm^{-2}$)보다 토경재배($2.0kg{\cdot}cm^{-2}$)에서 유의하게 높았으나, 수집종 간에는 차이를 보이지 않았다. 관능검사(1-9)에 의한 쓴맛은 보통이었으며, 쓴맛 정도와 비타민 C 함량은 재배방식 간에 유의한 차이를 보이지 않았다. 무기성분 함량은 Fe를 제외한 대부분이 토경재배보다 수경재배에서 높은 경향이었으며, K, Na, Zn 함량은 2배 이상 높았다.

• Journal of Biosystems Engineering
• /
• 제25권3호
• /
• pp.213-220
• /
• 2000

Grafting of fruit-bearing vegetables has been widely used to increase the resistance to soil-borne diseases, to increase the tolerance to low temperature or to soil salinity, to increase the plant vigor, and to extend the duration of economic harvest time. After grafting, it is important to control the environment around grafted seedlings for the robust joining of a scion and rootstock. Usually the shading materials and plastic films are used to keep the high relative humidity and low light intensity in greenhouse or tunnel. It is quite difficult to optimally control the environment for healing and acclimation of grafted seedlings under natural light. So the farmers or growers rely on their experience for the production of grafted seedling with high quality. If artificial light is used as a lighting source for graft-taking of grafted seedlings, the light intensity and photoperiod can be easily controlled. The purpose of this study was to develop a prototype system for the graft-taking enhancement of grafted seedlings using artificial lighting and to investigate the effect of air current speed on the distribution of air temperature and relative humidity in a graft-taking enhancement system. A prototype graft-taking system was consisted by polyurethane panels, air-conditioning unit, system controller and lighting unit. Three band fluorescent lamps (FL20SEX-D/18, Kumho Electric, Inc.) were used as a lighting source. Anemometer (Climomaster 6521, KANOMAX), T-type thermocouples and humidity sensors (CHS-UPS, TDK) were used to measure the air current speed, air temperature and relative humidity in a graft-taking system. In this system, air flow acted as a driving force for the diffusion of heat and water vapor. Air current speed, air temperature and relative humidity controlled by a programmable logic controller (UP750, Yokogawa Electric Co) and an inverter (MOSCON-G3, SAMSUNG) had an even distribution. Distribution of air temperature and relative humidity in a graft-taking enhancement system was fairly affected by air current speed. Air current speed higher than 0.1m/s was required to obtain the even distribution of environmental factors in this system. At low air current speed of 0.1m/s, the evapotranspiration rate of grafted seedlings would be suppressed and thus graft-taking would be enhanced. This system could be used to investigate the effects of air temperature, relative humidity, air current speed and light intensity on the evaportranspiration rate of grafted seedlings.