• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.3-6
• /
• 2009

Aluminum nitride (AIN) thin films were deposited on a polycrystalline 3C-SiC intermediate layer by a pulsed reactive magnetron sputtering system. Characteristics of the AIN/SiC heterostructures were investigated by field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). The columnar structure of AIN thin films was observed by FE-SEM. The surface roughness of AlN films on the 3C-SiC buffer layer was measured using AFM. The XRD pattern of AlN films on SiC buffer layers was highly oriented at (002). Full width at half maximum (FWHM) of the rocking curve near (002) reflections was $1.3^{\circ}$. The infrared absorbance spectrum indicated that the residual stress of AIN thin films grown on SiC buffer layers was nearly negligible. The 3C-SiC intermediate layers are promising for the realization of nitride based electronic and mechanical devices.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권4호
• /
• pp.40-43
• /
• 2014

Quantum information processing using superconducting qubit based on Josephson junction has become one of the most promising candidates for possible realization of a quantum computer. In the heart of the qubit circuits, the superconducting microwave resonator plays a key role in quantum operations and measurements, which enables single-photon level microwave quantum optics. During last decade, the coherence time, or the lifetime of the quantum state, of the superconducting qubit has been dramatically improved. Among several technological innovations, the improvement of superconducting microwave resonator's quality has been the main driving force in getting the qubit performance almost ready for elementary quantum computing architecture. In this paper, I will briefly review very recent progresses of the superconducting microwave resonators especially aimed for quantum device applications during the last decade. The progresses have been driven by ingenious circuit design, material improvement, and new measurement techniques. Even a rather radical idea of three-dimensional large resonators have been successfully implemented in a qubit circuit. All those efforts contributed to our understanding of the qubit decoherence mechanism and as a result to the improvement of qubit performance.

• Bulletin of the Korean Chemical Society
• /
• 제34권4호
• /
• pp.1035-1038
• /
• 2013

Rolling circle amplification (RCA) of DNA on an aligned-carbon nanotube (a-CNT) surface was electrically interfaced by the a-CNT based filed effect transistor (FET). Since the electric conductance of the a-CNT will be dependent upon its local electric environment, the electric conductance of the FET is expected to give a very distinctive signature of the surface reaction along with this isothermal DNA amplification of the RCA. The a-CNT was initially grown on the quartz wafer with the patterned catalyst by chemical vapor deposition and transferred onto a flexible substrate after the formation of electrodes. After immobilization of a primer DNA, the rolling circle amplification was induced on chip with the a-CNT based FET device. The electric conductance showed a quite rapid increase at the early stage of the surface reaction and then the rate of increase was attenuated to reach a saturated stage of conductance change. It took about an hour to get the conductance saturation from the start of the conductance change. Atomic force microscopy was used as a complementary tool to support the successful amplification of DNA on the device surface. We hope that our results contribute to the efforts in the realization of a reliable nanodevice-based measurement of biologically or clinically important molecules.

• 한국전산구조공학회논문집
• /
• 제17권2호
• /
• pp.161-169
• /
• 2004

본 논문은 축소 3층 건물의 최상층에 능동질량형 제어장치를 설치한 시스템에 관한 식별실향분석이다. OKID기법을 적용하여 진동대 및 제어장치의 가진 입력과 건물 및 제어장치의 응답인 출력관계를 분석하여 수학모델을 구하였다. 제어장치가 설치된 건물에 관한 입력은 진동대에 의한 지반가속도와 제어장치 모터의 구동신호이다 그리고 출력은 건물 각층과 제어장치의 가속도이다. 입출력 관계로 구하여진 수학모델을 바탕으로 제어장치의 최적설계를 수행하였으며 수치해석과 실험결과를 비교한바 서로 일치함을 확인할 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.143-143
• /
• 2008

Nanowires are promising options for building nanoscale electronic structures coming from high conductivity of nanowires. In particular, Deoxyribonucleic acid (DNA), which is structurally nanowire, can obtain highly ordered electronic components for nanocircuitry and/or nanodevices because of its very flexible length controllability, nanometer-size diameter, about 2 nm, and self-assembling properties. In this work, we used the method to form DNA-Nanowires (NWs) by using chemical treatment on Silicon (Si) surface, and Aminopropyl-triethoxysilane (APTES) was used as inducer of DNA sequence to modify the characteristics of Si surface. Moreover, we performed tilting technique to align DNA by the direction of flow of DNA solution. We investigated the assembly process between DNA molecules and APTES - coated Si surface according to the APTES concentration, from $1.2{\mu}\ell$ to $120{\mu}\ell$. Atomic Force Microscopy (AFM) images showed the combination rate of DNA molecules by the change of APTES concentration. As APTES concentration becomes thicker, aggregation of DNA molecules occurs, and this makes a kind of DNA networks. In this respect, we confirmed that there's a positive relationship between the concentration of APTES and the formation rate of DNA nanowires. Since there have been lots of research preceded to utilize DNA nanowires as template, so by using this positive relationship with proper alignment technique, realization of nano electronic devices with DNA nanowires might be feasible.

• Journal of Power Electronics
• /
• 제14권5호
• /
• pp.957-966
• /
• 2014

Some of DC actuators used in home automation, office automation, medical equipment and automotive systems require a position sensor. In low power applications, the introduction of such a transducer remarkably increases the whole system cost, which justifies the development of sensorless position estimation techniques. The well-known AC motor drive sensorless techniques exploiting the fundamental component of the back electromotive force cannot be used on DC motor drives. In addition, the sophisticated approaches based on current or voltage signal injection cannot be used. Therefore, an effective and inexpensive sensorless position estimation technique suitable for DC motors is presented in this paper. This technique exploits the periodic pulses of the armature current caused by commutation. It is based on a simple pulse counting algorithm, suitable for coping with the rather large variability of the pulse frequency and it leads to the realization of a sensorless position control system for low cost, medium performance systems, like those in the field of automotive applications.

• 한국생산제조학회지
• /
• 제19권4호
• /
• pp.498-503
• /
• 2010

The main purpose of this study strongly concerned micro machining error estimation by using FEM analysis of tool deflection shapes in micro flat end-milling process. For the precision micro flat end-milling process, analysis of micro cutting errors is mandatory. In general, tool deflection is a major factor which causes cutting error and limits realization of the high-precision cutting process. Especially, in micro end-milling process, micro tool deflection generates very serious problems in contrast to macro tool deflection. Methods which deal with compensation of cutting error by tool deflection in macro end-milling process have been studied plentifully but, few researches transact with micro scaled cutting tool deflection in micro cutting process. Therefore, the trend of micro tool deflection was estimated by using FEM analysis in this paper. Cutting forces were acquired by micro dynamometer and these were utilized in FEM analysis. In order to verify FEM analysis results, micro machining processes were carried out and real machined profiles were compared with FEM results. Finally through the proposed approach well suited FEM results were obtained.

• 한국소음진동공학회논문집
• /
• 제20권3호
• /
• pp.249-256
• /
• 2010

This paper presents performance analysis of a quarter-vehicle magneto-rheological(MR) suspension system with respect to different tire pressure. As a first step, MR damper is designed and manufactured based on the optimized damping force levels and mechanical dimensions required for a commercial mid-sized passenger vehicle. After experimentally evaluating dynamic characteristics of the manufactured MR damper, the quarter-vehicle MR suspension system consisting of sprung mass, spring, tire and the MR damper is constructed in order to investigate the ride comfort. After deriving the equations of the motion for the proposed quarter-vehicle MR suspension system, vertical tire stiffness with respect to different tire pressure is experimentally identified. The skyhook controller is then implemented for the realization of quarter-vehicle MR suspension system. Ride comfort characteristics such as vertical acceleration RMS and weighted RMS of sprung mass are evaluated under various road conditions.

• 산업융합연구
• /
• 제3권2호
• /
• pp.51-71
• /
• 2005

As the living standards have been enhanced thanks to rapid to rapid economic growth following industrial progress, today the advancement of woman into specialized jobs keep expanding not only for economic purpose such as increasing family income but also due to changed perception on woman's role, i.e. self-realization. In the actual situations, however, women are generally placed in a inferior position compared with men in most jobs, despite existence of gender equality policy. Therefore, concern and study on female adaptation into job and their work attitude have become increasingly important, which can contribute to alleviating women's discontent in the work but to raising efficiency of job execution and improving work quality. In this treatise, I researched the job attitude of woman for the period of 1980 up to 2005, with interval of every 5 years. For empirical analysis, research has been done towards females teachers in elementary and middle schools as well as female works in financial institutions. Both job fields have comparatively high percentage of female employees and have less sexual discrimination. The purpose of this vertical research is (1) to find out how women workers perceive their job environment, (2) to analyze empirically the change in female job attitude and their flow of consciousness. Ultimately this treatise aimed at contributing to efficient management of female work force in our society.

• 복식문화연구
• /
• 제26권6호
• /
• pp.966-981
• /
• 2018

Consumers' desire for beauty has become a driving force in the beauty service industry which was further developed through specialization and segmentation. Nail-care service, which is one of the beauty services, is showing rapid growth, and intense competition among salons has become apparent. Thus, service management method and marketing strategy are required for customer satisfaction. Therefore, in this study, we tried to classify the nail-care services on the basis of systematization and realization of its characteristics which are fundamental when developing management and marketing strategies. The subjects of this study were women in their 20s and above living in Seoul, Gyeonggi, and Incheon areas. As a result, the nail-care service factors are classified as "external environment" (interior, celebrity, newness), "internal environment" (equipment and products, cleanliness, and environment), "location" (location and transportation convenience), "reputation" (good reputation), "technician skill," "kindness," "relationship" (relationship, empathy, and affinity), and "price and discount." The consumer types of nail-care services were classified into three groups according to the degree of involvement of these concept systems. These results can be used as marketing basics and will be the basis for studying marketing strategies. However, the consideration of setting up a marketing strategy for each consumer type will be presented in a follow-up study.