• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.940-952
• /
• 2007

It is found that there are many serious errors in deriving the existing governing equations of motion for a wheel-axle set negotiating an arbitrarily changing radius curve by Vijay K. Garg and Rao V. Dukkipati. Among other things, despite the hypothesis on arbitrarily changing radius of curve, there had been no taking a time derivative of the radius R in the first half of the derivation. Even if the D'lambert force arising from the centrifugal acceleration of vehicle body or bogie was appropriately taken into account while calculating cant deficiency, it is unnecessarily duplicated in the force vectors of governing equations. The graphical model given in Fig. 5.15 is not enough to follow those developed expressions from both physical and structural points of view. Besides, there are some blunders in assigning plus or minus sign not to be regarded as simple typographic ones and similar mistakes are committed in deriving creep force expressions as in the case of a wheel-axle set on a tangent track.

• 대한토목학회논문집
• /
• 제33권3호
• /
• pp.1243-1251
• /
• 2013

본 연구의 목적은 텐션클램프의 초기 체결력이 급곡선 궤도용 탄성레일체결장치의 성능에 미치는 영향을 검토함에 있다. 이를 위해 본 연구에서는 탄성레일체결장치의 구성품 중 텐션클램프의 거동을 평가하기 위해 초기 체결력의 변화와 횡압의 증가를 고려한 실내시험, 현장측정 및 수치해석을 수행하였다. 수치해석 및 실험결과, 초기 체결력의 감소는 텐션클램프에 도입되는 초기 압축응력의 감소로 나타났다. 또한 텐션클램프의 압축응력은 급곡선 궤도에서 발생하는 횡압의 작용에 따라 인장응력으로 변환되는 것으로 나타났다. 따라서 초기 체결력에 의해 텐션클램프에 도입된 압축응력은 외력에 따른 발생 인장응력 저감을 위한 보강력으로 작용하는 것으로 분석되어, 탄성레일체결장치의 장기 내구성능 확보와 안정적인 거동을 유지하기 위해서는 적정 초기 체결력의 확보가 중요한 것으로 나타났다.

• 한국음향학회지
• /
• 제14권5호
• /
• pp.29-35
• /
• 1995

진동판 변위의 비선형적 운동에 의해 발생하는 스피커의 비선형왜곡은 음질을 열화시킨다. 이러한 비선형왜곡은 저주파 대역의 경우 주로 스피커의 지지부의 강성과 force factor의 비선형 특성에 의해 발생한다. 본 논문에서는 진동판 변위에 따라 변화하는 스피커의 비선형 강성과 비선형 force factor를 2차함수로 모델링하고 각각의 계수를 결정하는 방법에 대해 연구하였다. 진동판에 질량을 부가하여 동작점을 이동시키는 기계적인 방법을 사용하여 강성과 force factor 간의 커플링을 배제하였으며, 여러 동작점에서의 공진주파수를 측정함으로써 비선형 강성의 계수를 추출하였다. 비선형 force factor의 계수는 공진주파수에서 스피커에의 입력전압, 입력전류, 그리고 진동판 변위를 측정하여 얻은 그래프를 curve fitting 함으로써 구하였다.

• Steel and Composite Structures
• /
• 제16권2호
• /
• pp.117-133
• /
• 2014

Natural vibration of truss cable structures is analyzed based upon the general structural analysis software ANSYS, energy variational method and Rayleigh method, the calculated results of three methods are compared, from which the characteristics of free-vibration are obtained. Moreover, vertical seismic response analysis of truss cable structures is carried out via time-history method. Introducing three natural earthquake waves calculated the results including time-history curve of vertical maximal displacement, time-history curve of maximal internal force. Variation curve of maximal displacement of node along span, and variation curve of maximal internal force of member along span are presented. The results show the formulas of frequencies for truss cable structures obtained by energy variational method are of high accuracy. Furthermore, the maximal displacement and the maximal internal force occur near the 1/5 span point. These provide convenient and simple design method for practical engineering.

• 대한기계학회논문집A
• /
• 제37권6호
• /
• pp.827-832
• /
• 2013

본 논문에서는 횡압으로 곡선추종성을 판단하였고, 주행안전성은 윤중감소율 및 윤중과 횡압의 비율인 탈선계수로 평가하였다. 고출력 신형 전기기관차의 곡선추종성 및 주행안전성 평가한 결과, 탈선계수는 시험축이 열차의 앞쪽에 위치할 때가 뒤쪽에 위치할 때보다 크게 나타났으며, 탈선계수의 최대값은 경부선 상행선에서 0.572로 나타났다. 횡압은 곡선 선로가 많은 구간에서 크게 발생하여 주행속도보다는 곡선반경에 비례하는 것으로 나타났으며, 최대 축당 횡압은 태백선에서 77.6 kN 까지 발생하였다. 윤중감소율은 영동선에서 47.6 %까지 발생하였다. 최고속도에서의 주행안전성과 최소곡선반경에서의 곡선통과성능이 요구하는 기준을 만족하였다.

• 소음진동
• /
• 제7권2호
• /
• pp.215-222
• /
• 1997

The flow and acoustic fields due to a vortex ring interaction with a rigid sphere are simulated numerically. The flow field is regarded as three-dimensional inviscid and incompressible. The vorticity is assumed to be concentrated inside the finite core of vortex filament. The vortex filament curve, described by parabolic blending curve function, is used to effectively solve the modified Biot-Savart equation. The interaction between a vortex ring and a rigid sphere using the parabolic blending curve is calculated. The trajectory of the vortex ring is obtained with several different initial positions between the ring and the sphere. The force variations acting on the sphere are calculated by using the boundary integral method. Finally, we can also obtain the acoustic signals at the far field observation positions from the force variations acting on the rigid surface. We can find that the dipole axis of the directivity patterns are rotated during the interacting phenomena.

• 산업경영시스템학회지
• /
• 제5권6호
• /
• pp.69-78
• /
• 1982

Traditional CVP (Cost-Volume-Profit) analysis employs linear cost and revenue functions within some specified time period and range of operations. Therefore CVP analysis is assumption of constant labor productivity. The use of linear cost functions implicity assumes, among other things, that firm's labor force is either a homogenous group or a collection homogenous subgroups in a constant mix, and that total production changes in a linear fashion through appropriate increase or decrease of seemingly interchangeable labor unit. But productivity rates in many firms are known to change with additional manufacturing experience in employee skill. Learning curve is intended to subsume the effects of all these resources of productivity. This learning phenomenon is quantifiable in the form of a learning curve, or manufacturing progress function. The purpose d this study is to show how alternative assumptions regarding a firm's labor force may be utilize by integrating conventional CVP analysis with learning curve theory, Explicit consideration of the effect of learning should substantially enrich CVP analysis and improve its use as a tool for planning and control of industry.

• Journal of Oral Medicine and Pain
• /
• 제10권1호
• /
• pp.63-71
• /
• 1985

A kinematical study of bite force during voluntary isometric contraction was investigated in 20 Korean men with TMJ dysfunction and 30 Korean men as normal subject, ranging from 20 to 27 years old. The author observed maximum bite force, slope of bite force graph, curve index and duration of maximum bite force with the use of the foil strain gauge (MPM-3000) and RS Dymograph (Beckman). The obtained results were as follows : 1. Maximum bite forces were 29kg and 29kg for left and right side of normal subject (p>0.05) and 19kg and 29kg for affected and non-affected side of TMJ dysfunction patient. 2. The slopes of bite force graph were $68^{\circ}$ and $68^{\circ}$ for left and right side of normal subject (p>0.05) and $59^{\circ}$ and $71^{\circ}$ for affected and non-affected side of TMJ dysfunction patient. (p<0.01) 3. The curve indices were 0.93 and 0.90 for left and right side of normal subject and 1.10 and 0.90 for affected and non-affected side of TMJ dysfunction patient. (p>0.05) 4. The durations of maximum bite force were 424 msec and 413 msec for left and right side of normal subject and 337 msec and 334 msec for affected and non-affected side of TMJ dysfunction patient. (p>0.05)

• Journal of Oral Medicine and Pain
• /
• 제9권1호
• /
• pp.139-145
• /
• 1984

A Kinematical study of bite force during voluntary isometric contraction was investigated in 20 Korean women with TMJ dysfunction and 50 Korean women a normal subject, ranging from 19 to 29 years old. The author observed maximal bite force, slope of bite force graph, curve index and duration of maximal bite force by way of the foil strain guage(MPM-3000) and Dymograph(Beckman). The obtained results were as follows : 1. Maximal bite forces were 26.48kg and 21.38kg for left and right side of normal subject and 12.85kg and 20.70kg for affected and mon-affected side of TMJ dysfunction patients. 2. The slope of bite force graph were 64.69。and 63.83。 for left and right side of normal subject and 53.14。and 69.57。for affected and non-affected side. 3. The curve indexes were 0.54 and 0.80 for left and right side of normal subject and 2.30 and 0.60 for affected and non-affected side. 4. The duration of maximal bite force were 383.12 msec and 393.60 msec for left and right side of normal subject and 345.30 msec and 312.25 msec for affected and non-affected side.

• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.106-113
• /
• 2004

Most of mechanical structures are composed of many substructures connected to one another by various types of mechanical joints. In automotive engineering, it is important to study these connected structures under various dynamic forces for the evaluations of fatigue life and stress concentration exactly. In this study, the dynamic response of vehicle structure to external forces is classified an inverse problem involving strains from the experiment and the analysis. The practical dynamic forces are determined by the combination of the analytical and experimental method with analyzed strain by quasi-static finite element analysis under unit force and with measured strain by a strain gage under driving load, respectively. In a stressed body, inter-molecular chemical bonds are failed beyond the certain magnitude. The failure of molecular structure in material is considered as a time process of which rate is determined by mechanical stress. That is, the failure of inter-molecular chemical bonds is the fatigue lift of material. This kinetic concept is expressed as lethargy coefficient. And S-N curve is obtained with the lethargy coefficient from quasi-static tensile test. Equivalent practical dynamic force is obtained from the identification of practical dynamic force for one loading point. Using the practical dynamic force and S-N curve, fatigue life of a window pillar is analyzed with FEM under the identified force by the procedure of above mentioned.