• 한국항공우주학회지
• /
• 제50권11호
• /
• pp.791-800
• /
• 2022

능동 진동 제어 시스템(Active vibration control system, AVCS)을 이용하여 헬리콥터 기체의 능동 진동 제어 시 우수한 진동 제어 성능을 얻기 위하여서는 진동 상쇄 하중 발생기의 개수, 위치 및 하중 방향의 조합의 최적화가 중요하다. 따라서 고려 가능한 모든 하중 발생기의 조합에 대하여 헬리콥터 기체에 대한 AVCS의 진동 제어 성능을 조사하기 위해 Exhaustive 시험 기법을 적용한 AVCS 프레임워크를 구축하였다. 로터 진동 하중 해석, 기체 진동 응답 해석 및 AVCS 시뮬레이션 연구를 수행하기 위해 DYMORE II, MSC.NASTRAN 및 MATLAB Simulink 등 다양한 프로그램을 사용하였다. 이를 이용하여 비행 속도 158 knots의 UH-60A 헬리콥터에 대한 AVCS 적용을 위한 CRFG 조합을 최적화하였다. 최적의 CRFG 조합이 적용된 AVCS를 통해 UH-60A 헬리콥터의 4P 기체 진동 응답을 능동 제어한 결과, 기체의 주요 위치에서 4P 기체 진동 응답이 19.35~98.07%만큼 감소될 수 있었다.

• Smart Structures and Systems
• /
• 제31권3호
• /
• pp.229-245
• /
• 2023

The absence of excitation measurements may pose a big challenge in the application of structural damage identification owing to the fact that substantial effort is needed to reconstruct or identify unknown input force. To address this issue, in this paper, an iterative strategy, a synergy of Tikhonov regularization method for force identification and modified Jaya algorithm (M-Jaya) for stiffness parameter identification, is developed for damage identification with partial output-only responses. On the one hand, the probabilistic clustering learning technique and nonlinear updating equation are introduced to improve the performance of standard Jaya algorithm. On the other hand, to deal with the difficulty of selection the appropriate regularization parameters in traditional Tikhonov regularization, an improved L-curve method based on B-spline interpolation function is presented. The applicability and effectiveness of the iterative strategy for simultaneous identification of structural damages and unknown input excitation is validated by numerical simulation on a 21-bar truss structure subjected to ambient excitation under noise free and contaminated measurements cases, as well as a series of experimental tests on a five-floor steel frame structure excited by sinusoidal force. The results from these numerical and experimental studies demonstrate that the proposed identification strategy can accurately and effectively identify damage locations and extents without the requirement of force measurements. The proposed M-Jaya algorithm provides more satisfactory performance than genetic algorithm, Gaussian bare-bones artificial bee colony and Jaya algorithm.

• Journal of Ginseng Research
• /
• 제13권2호
• /
• pp.189-197
• /
• 1989

A new quaternary ammonium compound, hydrolyzed ginseng-saponin quaternary (HGSQ), from Korean ginseng saponin and 2,3-epoxypropyltrimethylammonium chloride has been developed as a conditioning agent in cosmetics. This structure has a hydrophobic group from the aglycone of ginseng saponin which is biologically active and considered to be the most important component of the Korean ginseng. Its properties : surface tension, critical micelle concentration (CMC), eye irritation, sorption onto hair, force reduction(%) and moisture retention effect were studied. Its cationic character allows the molecule to be more substantive than ginseng saponin. HGSQ had good physical properties and was safe. enough as a cosmetic raw material. Also half-head tests of HGSQ-containing shampoo were carried out to compare the conditioning effects in shampoos. HGSQ was an excellent conditioning agent in shampoo..

• Journal of Astronomy and Space Sciences
• /
• 제28권4호
• /
• pp.311-317
• /
• 2011

Momentum changing actuators like reaction wheels and control moment gyros are generally used for spacecraft attitude control. This type of actuators produces force and torque disturbances. These disturbances must be reduced since they degrade the quality of spacecraft attitude control. Major disturbances are mainly due to static and dynamic imbalances. This paper gives attention to the reduction of the static and dynamic imbalance. Force/torque measurement system is used to measure the disturbance of the test reaction wheel. An identification method for the location and magnitude of the imbalance is suggested, and the corrections of the imbalance are performed using balancing method. Through balancing, the static and dynamic imbalance is remarkably reduced.

• 한국군사과학기술학회지
• /
• 제17권6호
• /
• pp.725-732
• /
• 2014

The silencer for the medium caliber gun was studied to reduce the propagation of gun-generated noise from the firing test range to the community. Three types of silencer were made to compare the reduction of sound pressure level and the effect of chamber volume and the exit angle to the reduction of sound pressure was considered. The structural analysis and measurement of pressure in the silencer showed that the structure is safe in terms of strength. The increase of recoil force to buffer must be considered in the development of silencer. The hypothesis test on the muzzle velocity for the existence of silencer showed that there are no difference at the significance level of 0.05.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권1호
• /
• pp.155-161
• /
• 2001

Fundamental studies on the drag reduction of the circular cylinder having dimple were conducted by the measurement of the fluid force acting on the cylinder and by the flow visualization around the cylinder. The drag coefficients were changed by the shape and the geometrical arrangement of the dimple. The drag of the cylinder was reduced about 25% by the proper arrangement of the dimple. The flow field around the cylinder having dimple, which was the minimum drag, was visualized by the hydrogen bubble technique. In this case, the separation points were moved rearward and the wake region was small in comparison with that of the cylinder having no dimple.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.366-370
• /
• 2006

In this study, characteristics of impact force and impact sound of impact source such as bang machine, impact ball, and children's jumping were review. Results of review showed that impact ball has most similar characteristic to real impact sources in terms of objective properties such as impact force and impact sound. The effects of various isolator on floor impact sound were also investigated in apartment building and test facilities building using bang machine an impact ball. From the field measurement, it was found that the difference in reduction sound level between bang machine and impact ball was relatively large and the reduction sound level by impact ball was much larger than bang machine.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.269-274
• /
• 2007

With the importance of comfortable environment, research about noise reduction of construction is consisting much. If construction receives the input force, noise will be generated thereby. We must predict vibration and noise characteristic to reduce structured borne noise, and construction which become a basis of such research is plate. In order to predict the radiating noise from the vibrating surface. It is required to know the velocity distribution of vibration surface exactly. It is good to use bead for reducing vibration and noise of plate. In this study, we have analyzed structure-borne noise of plate with bead and compare with plate that there is no bead about equal exciting force.

• Structural Engineering and Mechanics
• /
• 제16권1호
• /
• pp.101-114
• /
• 2003

A base isolation system is proposed for earthquake protection of structures. The system incorporates spherical supports for the base, a specially designed spring-cam system to keep the base rigidly supported under normal condition and to allow it to move for the duration of the earthquake under the constraint of a spring with optimized non-linear characteristics. A single-story model is constructed to investigate the feasibility of the concept. Numerical simulations of the system as well as experimental results show that 95% reduction of the transmitted force to the structure can be achieved. To demonstrate the effectiveness of this isolation mechanism, the maximum dynamic bending stress developed at predetermined critical points within the frame of the structure is measured. Significant reduction of the dynamic stresses is obtained.

• 한국정밀공학회지
• /
• 제8권4호
• /
• pp.33-40
• /
• 1991

The decrease in surface roughness of work roll and steel strip in cold rolling of low carbon steel strip has been investigated by working distance, materials, total separating force and total reduction ratio. The main results are as follows; For the same lubricating conditions. 1) The changing of surface roughness of steel strip were similar to work roll. The transcription ratio is in inverse proportion to the carbon content of steel strip. 2) The surface roughness of steel strip is hardly change according to changing of total separating force and total reduction ration. 3) The wear of work rolls surface is more rapid in that case of continuous casted steel strip than ingot casted steel strip. The aluminium content dull powder adhere on the rolls surface, and so. It makes the mirror surface of work roll accelerate.