• Archives of Plastic Surgery
• /
• 제40권4호
• /
• pp.330-334
• /
• 2013

Background Ultrasound-aided fixation is a recently developed alternative method of treatment of zygomatico-maxillary (ZM) fracture, and it can resolve the problems of excessive torsion force and subsequent fractures of screws. We conducted this study to evaluate the clinical usefulness of ultrasound-aided fixation as compared with the conventional fixation method using a drill and an expander in patients with ZM fracture. Methods We conducted a retrospective study in 35 patients with ZM fracture who had been treated at our hospital during a period ranging from March of 2008 to December of 2010. We divided them into two groups: an ultrasound-aided fixation group, comprising 13 patients who underwent ultrasound-aided fixation (SonicWeld Rx, KLS Martin), and a conventional group, comprising 22 patients who underwent conventional fixation (Biosorb FX, Linvatec Biomaterials Ltd.). We compared such variables as sex, direction, age at operation, follow-up period, operation duration, number of fixed holes, and time to discharge between the two groups. Results The ultrasound-aided fixation reduced the operation duration by about 30 minutes as compared with that of conventional fixation. There was no significant difference in follow-up period, number of fixed holes, or time to discharge between the two groups. Furthermore, there were no complications in either group. Conclusions The ultrasound-aided fixation of fractured ZM bone using an absorbable implant system is safe and effective in promptly reducing the bone fracture and providing satisfactory cosmetic outcomes over time.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제3권3호
• /
• pp.183-191
• /
• 2015

본 논문에서는 헬리콥터 로터 시스템의 진동과 소음을 저감시키기 위해 개발이 진행 중인 능동거니플랩(AGF, Active Gurney Flap)에 대해 유한요소법을 이용하여 수행된 동특성 해석결과를 소개하였다. 거니플랩은 평판의 형태로 블레이드 하부 표면에 수직인 방향으로 전개되며, 블레이드 뒷전(T/E, Trailing Edge) 부위에 장착된다. 거니플랩 조립체는 전기모터와 L-형 링키지 및 플랩 등의 부품들로 구성되어 블레이드 내부에 장착되며, 고정프레임에서의 진동 성분들을 감소시키기 위해 3~5/rev 범위로 능동적인 제어가 필요하다. 따라서 외연적 시간적분법을 통해 로터 회전에 의한 원심력과 제어입력이 적용되고 있는 상황에서 거니플랩의 동적 응답특성을 분석하였으며, 해석 결과를 통해 거니플랩의 하향변위 요구도를 만족시킬 수 있음을 확인하였다.

• 한국소음진동공학회논문집
• /
• 제13권10호
• /
• pp.798-804
• /
• 2003

One of the methods that are used to compare and verify the supporting performance of the spacer grids developed is the vibration characteristic test. A modal test in this paper is performed for a dummy rod 3,847 mm tall supported by eight New Doublet (ND) spacer grids. For the vibration test in air, nine accelerometers, one displacement sensor and one shaker are used for acquiring signals, and an I-DEAS TDAS software Is employed for analyzing the signals. Also, a finite element (FE) analysis is performed by a beam-spring simple model and a contact model simulating the contact phenomenon between the rod and the ND spring. And then, the results of the modal testing are compared with those of the FE analysis. The natural frequencies as well as the mode shapes obtained by the experiment have a greater similarity to the results by the contact model than the previous beam-spring model. In audition, for grasping whether or not the modal parameters are influenced by where shaking spot is, two kinds of tests are performed : one is for the shaker attached at the fourth span (center), the other is for the shaker at the fifth span that is one span nearer to the bottom of the rod. The latter shows higher MAC than the former Finally, the vibration displacements are measured in the range of 0.l12∼0.214 mm for the excitation force of 0.25∼0.75 N.

• 한국전산구조공학회논문집
• /
• 제15권1호
• /
• pp.173-188
• /
• 2002

보행하중을 받는 바닥판 구조물의 진동해석을 위해서 일반적으로 계측한 보행하중을 적용하거나 Bachmann의 보행하중식을 사용하게 된다. 다양한 매개변수의 영향을 받는 보행하중은 계측이 쉽지 않으며 Bachmann 보행하중식은 보행진동수가 2.OHz와 2.4Hz로 제한적이기 때문에 다양한 보행진동수에 따른 보행하중을 적용하기가 곤란하다. 따라서 보행하중을 받는 구조물의 진동해석을 위해서 보행하중의 매개변수 분석과 다양한 보행진동수에 적용이 가능한 보행하중의 모형화가 필요하다. 본 논문에서는 로드셀이 장착된 계측 플레이트를 이용하여 바닥판에 가해지는 보행하중을 직접 계측하고 매개변수를 분석하였다. 그리고 퓨리에 변환을 이용하여 계측한 보행하중을 다양한 진동수를 가지는 조화하중으로 분해하였다. 분해과정을 거쳐 얻은 조화하중의 계수들을 보행진동수에 대한 일정한 함수관계로 유도하여 보행하중을 모형화하였다. 본 논문에서 제안한 보행하중식을 이용하면 다양한 보행진동수에 따라 다르게 나타나는 보행하중을 구조물의 진동해석에 용이하게 적용할 수 있다.

• 대한조선학회논문집
• /
• 제39권2호
• /
• pp.45-51
• /
• 2002

선체는 많은 다중곡(compound curvature)을 가진 판들로 이루어져 있으며 이러한 판들을 가공하기 위해서, 조선소에서는 선상 가열(line heating) 방법이 널리 이용되어 왔다. 선상 가열법에서 가열선을 결정하는 방법으로 지금까지는 기하 변형해석을 이용하여 가열선을 제시하여 왔다. 그러나 기하해석으로 구한 가열선에 대한 역학적 검증이 이루어지지 않고 있으며 여러 가열선 중 어떤 가공선을 선택할 것인가에 대한 연구도 이루어지지 않고 있다. 본 논문에서는 기하해석을 통해 판의 가열정보를 얻었을 때 이를 역학적으로 검증하여 실제로 판에 가열정보대로 가공을 하였을 때 나타날 수 있는 판의 거동을 예측하였다. 또한 본 논문에서는 적정 가열선을 찾는 전체 과정을 제시하였다. 가공정보로부터 예측된 가공형상을 구한 후 목적형상과 비교하여 가공형상이 목적형상의 오차범위 내에 존재할 때까지 가열선의 조정변수를 변화시켜 적절한 가공정보를 획득하였다.

• 대한조선학회논문집
• /
• 제52권6호
• /
• pp.485-493
• /
• 2015

Planing hull form is widely used as a high speed vessel hull. There is a problem of the planing hull not solved yet. The problem is that the planing hull has very large vertical acceleration and large heave and pitch motions. As one method for overcoming this problem, there is "wave-piercing hull". Before the motion in waves is investigated, the resistance and running attitude must be investigated. In this paper, the running attitude and resistance of two wave-piercing hulls are investigated by model tests. Model test results show that the wave-piercing hulls have large trim angle and sinkage at the high speed, so additional model tests are conducted by using the hull appended by stern interceptor that is very thin plate to increase the hydrodynamic pressure at the attached location. The results are compared with other planing hulls and the resistance components and the hydrodynamic force are discussed. From the model test results, it can be known that the stern interceptor is the effective appendage for the reduction of the resistance and trim angle of wave-piercing hull.

• Physical Therapy Rehabilitation Science
• /
• 제5권1호
• /
• pp.34-39
• /
• 2016

Objective: Hip abductors play a role in providing stability and movement to the lower limbs. The purpose of this study was to examine the effects of hip abductor fatigue on static balance and gait in the general population. Design: One group pre-test post-test design. Methods: Thirteen university students in their twenties volunteered for the study and had underwent a functional assessment. To induce fatigue, the subjects were instructed to raise their dominant lower extremity up against a load of 50% of 1 repetition maximum while producing hip abduction in a side-lying position. Subjects were instructed to maintain an abduction speed of 30 repetitions per minute to induce fatigue. Muscle fatigue was considered to be established when subjects were unable to perform hip abduction three consecutive times along with the metronome. A post-test of balance and gait was performed immediately in order to prevent fatigue recovery. The center of pressure (COP) distance area was measured using the Zebris FDM-S Multifunction Force measuring plate. Gait performance was analyzed using the GAITRite. Results: The COP distance was increased after fatigue was induced. There was a significant increase in the standard deviation of the medio-lateral and antero-posteror distance (p<0.05). Although there was no significant difference in gait parameters, there was a significant decrease in single support time after fatigue was induced (p<0.05). Conclusions: There was an increase in static balance instability and a significant decrease in single support time during gait due to hip abductor muscle fatigue.

• Physical Therapy Rehabilitation Science
• /
• 제5권1호
• /
• pp.9-14
• /
• 2016

Objective: This study was to investigate the effects of Task-oriented training for Gross Motor Function Measure (GMFM), gait and balance function in cerebral palsy. Design: Randomized controlled trials. Methods: Twenty four subjects were recruited by means of a convenience sampling from Kangseo-Gu G rehabilitation center. Subjects were 24 inpatients and were randomly divided into a task-oriented training group and a conventional group. Twelve patients were experimental group who executed the task-oriented training (5 times/wk) for 4 weeks. The task-oriented program mainly focused on the capabilities of independent walking, with the angle of inclination set at 0 degrees and walking at a self-selected comfortable speed. In addition, balance training included the one-legged standing with weight-shifting and task-oriented training. Twelve patients were control group who executed only general conventional therapy (5 times/wk) for 4 weeks. All subjects were evaluated about the motor function, gait and balance function. Subjects have conducted the measured variables, GMFM, GAITRite, PDM Multifunction Force Measuring Plate after treatment. Results: There was statistically significant increase of Gross Motor Function Measure scores of the experimental group and control group after 4 weeks (p<.05). There was statistically significant increase of gait and balance function of the experimental group after 4 weeks of task-oriented training (p<.05). The experimental group showed a significantly improvement in GMFM, gait, and balance compared to the control group (p<0.05). Conclusions: This study proved that task-oriented training after stroke can improve Gross Motor Function Measure, gait and balance. Thus this study can suggest that task-oriented training for gross motor function, gait and balance be effective on the cerebral palsy.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.381-396
• /
• 2020

Investigations of the commercial aircraft impact effect on nuclear island infrastructures have been drawing extensive attention, and this paper aims to perform the safety assessment of Generation III nuclear power plant (NPP) buildings subjected to typical commercial aircrafts crash. At present Part I, finite element (FE) models establishment and validations for both the aircrafts and NPP buildings are performed. (i) Airbus A320 and A380 aircrafts are selected as the representative medium and large commercial aircrafts, and the corresponding fine FE models including the skin, beam, fuel and etc. are established. By comparing the numerically derived impact force time-histories with the existing published literatures, the rationality of aircrafts models is verified. (ii) Fine FE model of the Chinese Zhejiang Sanao NPP buildings is established, including the detailed structures and reinforcing arrangement of both the containment and auxiliary buildings. (iii) By numerically reproducing the existing 1/7.5 scaled aircraft model impact tests on steel plate reinforced concrete (SC) panels and assessing the impact process and velocity time-history of aircraft model, as well as the damage and the maximum deflection of SC panels, the applicability of the existing three concrete constitutive models (i.e., K&C, Winfrith and CSC) are evaluated and the superiority of Winfrith model for SC panels under deformable missile impact is verified. The present work can provide beneficial reference for the integral aircraft crash analyses and structural damage assessment in the following two parts of this paper.

• 한국정밀공학회지
• /
• 제28권8호
• /
• pp.975-983
• /
• 2011

A microfin on a heated surface and its effects of the heat transfer has been investigated. The thickness of the fin is about 8 micrometer to allow the flexible up-down motion of the fin. Two-way complete FSI (Fluid-Structure Interaction) method has been applied for the analysis. Firstly, the deformation of a microfin due to the pulsating flow is evaluated using structure analysis. The flow and temperature patterns are predicted by CFD (Computational Fluid Dynamics) method. At each time step, using the pressure force and temperature distribution from CFD, the deformation of the wing is evaluated by FEM. Also in order to estimate the resonance probability, the natural frequency of the wing structure is calculated by modal analysis. The proposed numerical procedure was validated through experiment using a single fin. Through this work, we show that the increase of 40% in heat transfer capacity using the microfin has been compared with that of flat plate case.