• 전자공학회논문지B
• /
• 제33B권4호
• /
• pp.41-51
• /
• 1996

This paper presents a fuzzy data fusion scheme which can analyze the sensor condition, the strength and location of a force applied to a test material. These can be realized by the modelling and fusioning of sensor signals and sensor properties. The technique uses, as the inference variables, relative magnitude of data (RMD), absolute magnitude of data (AMD) initial state (IS), synchronized relational function (SRF) and asynchronized relational function (ARF). To show the usefulness of this scheme, an experiment on the cantilever bar and six strain gages is carried out. The location of the force is inferred from SRF and ARF and the strength from RMD and AMD. In particular, the strength is compared with the measurement data of the force sensor.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.219-224
• /
• 2002

There are two important variables in machining process control, which are feed and cutting speed. In this work, a two degree-of-freedom controller is designed and implemented to achieve on-line cutting force control based on the modelling of cutting process dynamics which are established through step response test. Two schemes are proposed and implemented. The first is feed control under the constant spindle speed and spindle speed control under the constant fled speed. The second is a simultaneous control of feed and spindle speed. Those are confirmed to work properly. Especially the latter shows a faster response and we'll be evaluated to pare away workpiece by simultaneous control of position and cutting farce sooner or later.

• Structural Engineering and Mechanics
• /
• 제13권3호
• /
• pp.241-260
• /
• 2002

The effect of shear coupled with axial force variation on the inelastic seismic behaviour of reinforced concrete bridge piers is investigated in this paper. For this purpose, a hysteretic axial-shear interaction model was developed and implemented in a nonlinear finite element analysis program. Thus, flexure-shear-axial interaction is simulated under variable amplitude reversed actions. Comparative studies for shear-dominated reinforced concrete columns indicated that a conventional FE model based on flexure-axial interaction only gave wholly inadequate results and was therefore incapable of predicting the behaviour of such members. Analysis of a reinforced concrete bridge damaged during the Northridge (California 1994) earthquake demonstrated the importance of shear modelling. The contribution of shear deformation to total displacement was considerable, leading to increased ductility demand. Moreover, the effect of shear with axial force variation can significantly affect strength, stiffness and energy dissipation capacity of reinforced concrete members. It is concluded that flexure-shear-axial interaction should be taken into account in assessing the behaviour of reinforced concrete bridge columns, especially in the presence of high vertical ground motion.

• 한국결정성장학회지
• /
• 제9권5호
• /
• pp.454-458
• /
• 1999

Hydrodynamic Thermal Capilary Model developed previously has been modified to study the transport phenomena in the Czochralski process. Our analysis is focused on the heat transfer in the system, convection in the melt phase, and the meniscus and interface shape. Four major forces drive melt flow in the crucible, which include thermal buoyancy force in the melt, thermocapillary force along the curved meniscus, crucible rotation and crystal rotation. Individual flow mechanism due to each driving force has been examined to determine its interaction with the meniscus and interface shape. A nominal 4-inch-diameter silicon crystal growth process is chosen as a subject for analysis. Heater temperature profile for constant diameter crystal is also present as a function of crystal height or fraction solidified.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.282-283
• /
• 2007

본 논문에서는 저전압에서 구동 할 수 있는 압전구동 방식의 RF MEMS 스위치를 설계하였다. 설계는 유한요소기법(FEM)을 지원하는 시뮬레이터 (ConventorWare)를 사용하여 수행하였고, 이를 바탕으로 deflection, contact force, stress 등 기계적인 해석을 함으로써 최적화된 설계를 할 수 있었다. 이번 설계에서는 적절한 contact force를 유지하면서 hinge에서 받는 stress를 최소화하기 위하여 구동기를 2개 사용한 듀얼형식의 모델을 제안하였고, hinge의 모양은 'ㄷ'로 하여 deflection을 향상시켰다. 이 듀얼형식의 최적화된 모델은 signal line과 contact pad 간의 gap이 3.4${\mu}m$일 때, 최초 2.8V에서 contact이 이루어졌으며, 5V에서 12.4${\mu}N$의 contact force와 116MPa의 stress를 얻었고, 차후, SP4T나 SP6T 등의 설계시 공간 효율이 높은 다양한 형태의 구조를 설계할 수 있다.

• Structural Engineering and Mechanics
• /
• 제7권4호
• /
• pp.413-432
• /
• 1999

A macro-element model is developed to account for shear deformation and bond slip of reinforcement bars in the beam-column joint region of reinforced concrete structures. The joint region is idealized by two springs in series, one representing shear deformation and the other representing bond slip. The softened truss model theory is adopted to establish the shear force-shear deformation relationship and to determine the shear capacity of the joint. A detailed model for the bond slip of the reinforcing bars at the beam-column interface is presented. The proposed macro-element model of the joint is validated using available experimental data on beam-column connections representing exterior joints in ductile and nonductile frames.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.418-430
• /
• 2014

In this paper, a modelling technique for simulating self-propelled ships in waves is presented. The flow is modelled using a RANS solver coupled with an actuator disk model for the propeller. The motion of the ship is taken into consideration in the definition of the actuator disk region as well as the advance ratio of the propeller. The RPM of the propeller is controlled using a PID-controller with constraints added on the maximum permissible RPM increase rate. Results are presented for a freely surging model in regular waves with different constraints put on the PID-controller. The described method shows promising results and allows for the studying of several factors relating to self-propulsion. However, more validation data is needed to judge the accuracy of the model.

• 한국해양공학회지
• /
• 제9권2호
• /
• pp.149-155
• /
• 1995

This study is to investigate the dynamic pressure caused by breaking waves on a recurved offshore structure. A physical modelling was performed in a two-dimensional wave flume. The measuments from the physical modelling were compared with several known equations. The shock and secondary pressures were found to be dependent on water depth, breaking wave height and the size of the air pocket. The maximum pressure was recorded near the still water level and the secondary pressures near the recurved the recurved structure were found to be less than those experienced in a vertical offshore structure.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.974-979
• /
• 2004

The fluidic muscle cylinder consist of an air bellows tube, flanges and lock nuts. It's features are softness of material and motion, simplicity of structure, low production cost and high power efficiency. In this study, we carried out the finite element modelling and analysis about the main design variables such as contraction ration and force, diameter increment of fluidic muscle cylinder. On the basis of finite element analysis, the prototype of fluidic muscle cylinder was manufactured and tested. Finally, we compared the results between the test and the finite element analysis.

• Journal of Mechanical Science and Technology
• /
• 제17권12호
• /
• pp.1977-1985
• /
• 2003

In the present study, the dynamic modelling of planar mechanisms that consist of a system of rigid bodies is carried out using point coordiantes. The system of rigid bodies is replaced by a dynamically equivalent constrained system of particles. Then for the resulting equivalent system of particles, the concepts of linear and angular momentums are used to generate the equations of motion without either introducing any rotational coordinates or distributing the external forces and force couples over the particles. For the open loop case, the equations of motion are generated recursively along the open chains. For the closed loop case, the system is transformed to open loops by cutting suitable kinematic joints with the addition of cut-joints kinematic constraints. An example of a multi-branch closed-loop system is chosen to demonstrate the generality and simplicity of the proposed method.