• Conservation Science in Museum
• /
• v.17
• /
• pp.85-100
• /
• 2016

The Bukji-ri Stone Pensive Bodhisattva of Bonghwa in the collection of Kyungpook National University Museum was transported to the National Museum of Korea for display in a special exhibition('Masterpieces of Early Buddhist Sculpture 100 BCE - 700 CE') and therefore underwent conservation ahead of the exhibition's start date. The stone sculpture had visibly encrusted surface dirt, granular disintegration and fissures upon arrival. Notably, a crack running obliquely across its lower half rendered the object unable to support its own weight without a pedestal, so one was created in order to maintain the sculpture in an upright position while on exhibition. The sculpture was further examined using a polarizing microscope and a stereoscopic microscope. SEM-EDS resulted in petrographic analysis of the stone's mineral composition and identification of its surface contaminants. Polarizing light microscopy confirmed biotite granite as the main mineral component of the object. Several urethane resins cast in round cross-sections were inserted into the newly made pedestal and stability tests were perform to measure the frictional force of the resins. An additional test was performed to compare urethane resin and epoxy resin, with results showing urethane to have a higher coefficient of friction. Utilizing a pedestal with urethane resin effectively ensured the stability of the Bukji-ri Stone Pensive Bodhisattva of Bonghwa during the aforementioned exhibition.

• Journal of the Korean Magnetics Society
• /
• v.17 no.2
• /
• pp.60-64
• /
• 2007

Ba-Ferrite single crystals were prepared and characterized by X-ray, SEM and Mossbauer spectroscopy. The single crystal layers was cut in the c-axis and radiated to the surface by ${\gamma}-rays$ for Mossbauer spectroscopy. We found out that the spin states in Fe atoms were parallel to the ${\gamma}-rays$ direction. The temperature dependence of the hyperfine field is almost similar to that of powder samples. The crystal structure is a Magnetoplumbite without any other phases and the lattice parameters are found out with $a_0=5.892{\AA},\;b_0=5.892{\AA},\;c_0=23.198{\AA}$. $M\"{o}ssbauer$ spectrum in single crystal have 5 sets off absorption lines in each Fe site when the ${\gamma}-rays$ have the same radiation direction with the c-axis in the crystal, which mean that the whole crystal bulk formed only one crystal and same spin direction. The hysteresis curve shows the saturation moment and coercive force of 70.71 emu/g and 320 Oe respectively.

• Journal of the Korean Society of Costume
• /
• v.59 no.5
• /
• pp.83-100
• /
• 2009

In the 'Society of the Spectacle', Guy Debord argued that modern life was dominated by the commodity form and the false desires it engendered. He predicted in 1967 that culture would become the driving force in the development of the economy by the end of the century, He was sure when culture becomes nothing more than a commodity, it must also become the star commodity of the spectacular society. Fashion, the starriest of star commodities with its seductive fantasy approaches to the viewers occluding the commercial reality. From this point, the spectacular property of the modern fashion can be found. This study starts on the notion that the modern fashion is on the center of capitalist consumer culture and is constructed by spectacle. On this premise, the purpose of this study is analysing the attribute of 'spectacle' and 'keeping distance ￡Tom spectacle' in modern fashion expressed in fashion show, fashion media and fashion store. The fashion houses in the 1990s that recognised the commercial value of shock and spectacle were eager to employ young spectacularly visible named designers. They generated the publicity necessary for sales of perfume, cosmetics, bags and diffusion range of clothes through the visible fashion show and fashion media. In the fashion show and fashion media, fashion goods as the commodity both flaunts and disguises its commercial nature in spectacle. The spectacle on the fashion store is the process turning the commodity into image to arouse viewer's higher interest. In the fashion store, the appearance of the commodity such as space, display, package is considered more importantly than its 'utility value'. Meanwhile, the study also covered the innovative trial to evade the ubiquitous 'spectacle' in fashion area.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.2
• /
• pp.109-115
• /
• 2013

In this paper, we developed pressure mesuring system for powered wheelchair and tried to validate the usefulness of developed system by pressure measuring experiment with 3D motion analysis. This system consist of 64ch seat FSR(Force Sensitive Resistance) sensor unit, 30ch*2 armchair FSR sensor unit, analog and digital hardware board, 2ch rotary encoder unit and realtime signal processing & display S/W. And each data acquired from this system has sampling frequency of 12bit, 10Hz. Pressure measuring experiment for 10 persons who use wheelchair in real life was performed in the 3D vision analysis room. From the experiment, we obtained result that the center line of body inclined to outside direction during powered-wheelchair rotate any direction.

• Steel and Composite Structures
• /
• v.21 no.2
• /
• pp.267-287
• /
• 2016

The seismic performance of the ordinary steel reinforced concrete (SRC) columns has no significant improvement compared to the reinforced concrete (RC) columns mainly because I, H or core cross-shaped steel cannot provide sufficient confinement for core concrete. Two improved SRC columns by constructing with new-type shaped steel were put forward on this background, and they were named as enlarging cross-shaped steel and diagonal cross-shaped steel for short. The seismic behavior and carrying capacity of new-type SRC columns have been researched theoretically and experimentally, while the shear behavior remains unclear when the new-type columns are joined onto SRC beams. This paper presents an experimental study to investigate the shear capacity of new-type SRC joints. For this purpose, four new-type and one ordinary SRC joints under low reversed cyclic loading were tested, and the failure patterns, load-displacement hysteretic curves, joint shear deformation and steel strain were also observed. The ultimate shear force of joint specimens was calculated according to the beam-end counterforce, and effects of steel shape, load angel and structural measures on shear capacity of joints were analyzed. The test results indicate that: (1) the new-type SRC joints display shear failure pattern and has higher shear capacity than the ordinary one; (2) the oblique specimens have good bearing capacity if designed reasonably; and (3) the two proposed construction measures have little effect on the shear capacity of SRC joints embedded with diagonal cross-shaped steel. Based on the mechanism observed from the test, the formulas for calculating ultimate shear capacity considering the main factors (steel web, stirrup and axial compression ratio) were derived, and the calculated results agreed well with the experimental and simulated data.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.404-404
• /
• 2012

저차원계 탄소 동소체는 특유의 구조에서 기인하는 우수한 물리적 성질로 인해 각광받고 있는 물질이다. 탄소원자가 육각형 격자 모양을 지닌 2차원계 물질인 그래핀(graphene)은 뛰어난 전기적, 물리적, 광학적 성질로 인해 전계효과 트랜지스터(field effect transistors), 투명전극(transparent electrodes), 에너지 저장체, 복합체, 화학/바이오 센서 등 다양한 분야에서 활용을 위한 연구가 진행되고 있다. 또한 그래핀이 튜브형태로 말려있는 1차원계 물질인 탄소나노튜브(carbon nanotube)의 전기적, 열적, 기계적 성질은 이를 전계방출 디스플레이(field emission display), 전도성 플라스틱, 가스 저장체, 슈퍼 커패시터 등에 적용가능하게 한다. 최근 2차원계 물질인 그래핀과 1차원계 물질인 탄소나노튜브의 장점을 극대화하기 위한 복합 나노 구조에 대한 다양한 연구가 진행되고 있는 추세이다[1-5]. 본 연구에서 그래핀-탄소나노튜브 혼성 구조의 제작은 다음과 같이 진행되었다. 우선 열 화학기상증착법(thermal chemical vapor deposition)을 이용하여 그래핀을 합성하였다. 합성된 그래핀은 메타크릴산메탈 수지(polymetylmethacrylate; PMMA)를 이용한 전사(transfer)방법을 이용하여 원하는 기판에 위치시키고, 직류 마그네트론 스퍼터링(DC magnetron sputtering)을 이용하여 탄소나노튜브의 합성을 위한 촉매층을 증착하였다. 이후 열 화학기상증착법을 이용하여 그래핀 위에 탄소나노튜브를 합성함으로써 그래핀-탄소나노튜브 혼성 구조를 제작하였다. 합성된 그래핀-탄소나노튜브의 구조적 특징은 주사 전자 현미경(scanning electron microscopy)을 통해 확인하였고, 촉매의 표면 형상 및 화학적 상태는 원자힘 현미경(atomic force microscopy)과 X선 광전자 분광법(X-ray photoelectron spectroscopy)을 통해 확인하였다. 또한 제작된 그래핀-탄소나노튜브의 전기적 특성 측정을 통해 나노전자소자로의 응용가능성을 조사하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.12
• /
• pp.12-17
• /
• 2007

The effects of the evaporation rate of MgO films using an electron beam on the MgO properties and the discharge characteristics of a plasma display panel(PDP) were investigated and analyzed. Mgo films were deposited with the various MgO evaporation rates. The MgO properties such as the crystal orientation, the surface roughness, and the film structure, were inspected using XRD(X-ray diffractometry), AFM(atomic force microscopy). From the experiments and Paschen law, the maximum value of the secondary, electron emission coefficient $(\gamma)$ was obtained at the evaporation rate of $5\AA/sec$. The minimum firing voltage and the maximum luminous efficiency were obtained at an evaporation rate of $5\AA/sec$. In the MgO film deposited at $5\AA/sec$, the (200) orientation and $F^+$ center were most intensive. The XRD results and cathode-luminescence(CL) spectra show the $\gamma$ values are correlated with $F/F^+$ centers of the molecular structure of MgO films.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.96-96
• /
• 2009

투명전도막은 FPD의 전자부품에서 전극으로 널리 사용되고 있으며 현재 대부분의 투명전도막으로는 ITO가 사용되고 있다. 하지만, ITO에 사용되는 In은 희유금속으로 지속적인 사용량 증가로 가격의 급등과 더불어 수급 불안정으로 인해 In을 대체하고자 하는 연구가 집중적으로 이루어지고 있다. 그러나 $In_2O_3$를 대체한 ZnO계 등은 비저항이 높아 대체 적용이 가능하지 못하고 있다. 이에 In의 양을 줄이면서 상대적으로 저가이면서 광학적 특성이 우수한 ZnO을 첨가하여 기존의 ITO에 상응하는 전기전도도와 광투과율을 얻을 수 있는 새로운 3성분계 TCO 에 대한 연구가 활발히 이루어지고 있다. 따라서, 본 연구그룹은 $In_2O_3$을 기본 조성으로 하는 $In_2O_3-ZnO-SnO_2$계를 선정하여 IZTO target을 제조 후 RF magnetron sputtering 방법으로 투명전도막을 제작하였다. 본 연구에서는 RF 파워와 동작압력, 동작시간 그리고 열처리온도의 증착 조건에 따른 IZTO 박막의 특성을 평가하였다. 박막의 특성 및 표면 미세구조를 관찰하기 위해 AFM(Atomic Force Microscope)을 이용하였으며, XRD(X-ray diffraction)을 이용하여 결정성을 분석하였고, 4 point-prove, Hall effect measurement와 UV/Visible spectrometer를 통해 전기적, 광학적 특성을 평가하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.237.1-237.1
• /
• 2015

OLED의 낮은 외부 광자 효율 문제를 해결하기 위해서는 발광층은 물론 전극 재료에 대한 연구가 함께 진행되어야 한다. 최근 플렉서블 디스플레이(Flexible Display) 분야에서 투명전극(Transparent Electrode)은 큰 주목을 받고 있다. 기존 전자소자의 투명전극으로는 인듐산화물(ITO, Indium Tin Oxide)이 널리 사용되어 왔으나, ITO의 주원료인 인듐(Indium)은 희소성으로 인해 앞으로 30년 후에 고갈될 것으로 예상되어 ITO를 대체할만한 투명전극 재료가 필요하게 되었다. 인듐이 포함되지 않은(Indium-free) 투명전극을 개발하려는 많은 연구들이 진행 중인데, 본 연구에서는 PEN(Polyethylene Naphthalate) 유연기판 상에 그래핀(Graphene)을 투명전극으로 구현하여 OLED의 효율을 높이는데 이용하고자 하였다. 화학 기상 증착(CVD, Chemical Vapor Deposition) 방법을 이용하여 Cu 호일 위에 그래핀을 성장시킨 후 PEN 유연기판에 전사하여 그래핀 투명전극을 구현하면서 그래핀 성장층을 단층 또는 다층으로 구분하여 성장시켜 각각의 투명전극을 구현해보았다. 유연기판 상의 그래핀의 상태를 확인하기 위해 라만 분광(Raman Spectroscopy) 분석을 이용하여 그래핀 고유의 라만 꼭지점(Raman peak)인 G 꼭지점(G peak: 1580 cm-1), 2D 꼭지점(2D peak: ~2700 cm-1)을 확인하였는데 그래핀 전사 상태가 양호하여 D 꼭지점(D peak: ~1360 cm-1)은 나타나지 않았다. 원자힘 현미경(AFM, Atomic Force Microscope) 분석을 통해 다층 및 단층 그래핀 표면의 거칠기(Roughness) 및 두께(Thickness)를 각각 확인할 수 있었고 자외선-가시광선 분광법(UV-Visible Spectroscopy) 분석으로 그래핀 투명전극과 유연기판의 투과도(Transmittance)를 분석하였으며, 단층 그래핀 투과도가 90%수준의 높은 값이 나타나 ITO보다 개선됨을 확인하였다. 그래핀 면저항은 TLM(Transmission Line Measurement)법을 통해 측정하였는데, 단층 그래핀의 경우 $800{\Omega}/{\square}$ 내외 수준임을 확인할 수 있었다. 본 연구에서는 근자외선 영역에서 높은 투과도와 우수한 전기적 특성을 가지는 그래핀 투명 전도성 전극 구조를 제안하고, 나아가 가시영역에서 ITO를 대체할 수 있는 투명 전도성 전극 물질을 개발함으로써 발광다이오드의 광효율을 높일 수 있는 투명 전도성 전극을 구현하였다.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.856-859
• /
• 2006

Patient's position who muscle ache curer for hospital undergoes person entrance and treatment that take advantage of biological, physical force of low frequency and it is equipment that treat body muscle ache, but use equipment when use patient into compensation in hospital specially, that consider everybody is important first of all. This research question investigation with market survey of old product enforce because preference degree reflected officer a result and apply opinion tuned with product development connection engineers on DESIGN direction via typical product design development process close. This curer development research analyzed data involved directly taking advantage of FGI techniques with literature investigation collection. Investigation examined laying stress on muscle ache curer for hospital and a nurse than a doctor answered on question and purchase selection criterion or price portion to user focus. Direct market survey research that see item indicated by competition four provision shortcomings consequently in NEW MODEL development hereafter supplement and expectation. by contributing greatly in M/S security strategy hereafter because design development consisted for side that improve.