• Asian-Australasian Journal of Animal Sciences
• /
• 제18권3호
• /
• pp.420-426
• /
• 2005

Effect of pasture finishing on $\alpha$-tocopherol and $\beta$-carotene concentrations, drip loss, cooking loss, Warner-Bratzler shear force, fatty acid composition, meat color and metmyoglobin percentage of m. longissimus thoracis of Japanese Shorthorn steers was studied. Japanese Shorthorn steers (n=8), fattened indoors with a concentrate-based diet until they were 19 months of age were divided into two groups of four steers. Steers of the concentrate-fed group were fattened indoors with a concentrate-based diet until they were slaughtered. Steers of the pasture-fed group were fattened on pasture until they were slaughtered. The $\alpha$-tocopherol and $\beta$-carotene concentrations in the muscle of the pasture-fed group were higher (p<0.05) than those of the concentrate-fed group. The drip loss of the muscle of the pasture-fed group was lower (p<0.05) than that of the concentrate-fed group. Compared with the concentrate-fed group, the concentration of peroxidisable lipids (fatty acids with three or more unsaturated bonds) in the muscle of the pasture-fed group was high (p<0.05). The metmyoglobin percentage during display of the muscle of the pasture-fed group was higher (p<0.05) than that of the concentrate-fed group. These results suggested that pasture finishing decreased drip loss of the beef but lowered meat color stability.

• 한국분말재료학회지
• /
• 제20권4호
• /
• pp.297-301
• /
• 2013

Mirror surface machining for large area flattening in the display field has a problem such as a tool wear and a increase in machining time due to large area machining. It should be studied to decrease machining time and tool wear. In this paper, multi-tool machining method using a PCD tool and a SCD tool was applied in order to decrease machining time and tool wear. Machining characteristics (cutting force, machined surface and surface roughness) of PCD tool and SCD tool were evaluated in order to apply PCD tool to flattening machining. Based on basic experiments, the PCD/SCD multi-tool method and the SCD single-tool method were compared through surface roughness and machining time for appllying large area mold machining.

• 로봇학회논문지
• /
• 제8권3호
• /
• pp.143-149
• /
• 2013

This paper presents a new miniature haptic display to convey ample haptic information to a user of a handheld interface. There are buttons on interfaces or general electronic devices, but existing buttons provide haptic feedback of only one passive pattern to a user. Because humans perceive tactile and kinesthetic information simultaneously when they handle objects the proposed actuator provides both sensations at once. It is able to generate various levels of kinesthetic sensations when pressing a button under diverse situations. Also, vibrotactile feedback can be delivered for exciting haptic effects with numerous patterns. Its performance was evaluated in accordance with the resistive force by changing the intensity of the input current. Experiments show that the proposed actuator has the ability to provide numerous haptic sensations for more realistic and complex haptic experiences.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.857-860
• /
• 2002

The material that is both conductive in electricity and transparent to the visible-ray is called transparent conducting thin film. It has many field of application such as solar cell, liquid crystal display, transparent electrical heater, selective optical filter, and a optical electric device. In this study, indium tin oxide (ITO ; Sn-doped $In_2O_3$) thin films were deposited on $SiO_2$/soda-lime glass plates by a dc magnetron sputtering technique. The crystallinity and electrical properties of the films were investigated by X-ray diffraction(XRD), atomic force microscopy (AFM) scanning and 4-point probe. The optical transmittance of ITO films in the range of 300-1000nm were measured with a spectrophotometer. As a result, we obtained polycrystalline structured ITO films with (222), (400), and (440) peak. Transmittance of all the films were higher than 90% in the visible range.

• Journal of the Optical Society of Korea
• /
• 제15권4호
• /
• pp.362-367
• /
• 2011

Organic ($Alq_3$) film, which was coated on a donor plate, was transferred to an organic light emitting diode (OLED) substrate with help of heat generated by a dithering laser beam. The laser beam was diffracted in an acousto-optic modulator (AOM), then focused on the laser-to-heat converting layer of the donor plate; the focused spot followed trajectories guided by rotation of a Galvano-mirror. Three different functional waveforms, sine wave, square wave, and saw tooth wave were applied to the AOM as modulation signal to generate the dithering beam. The fluorescence microscope images of the donor plate showed that the patterns of removed $Alq_3$ film were affected considerably by the modulation waveforms and the phase difference between adjacent dithering beams. Further, the printed images of Alq3 film on the OLED substrate were different from the patterns of removed Alq3 film. Atomic force microscope images indicated that not only direct transfer but also deposition by sublimated vapor of Alq3 contributed to the pattern formation. Printed patterns affected considerably the electricity-to-light conversion characteristics of OLEDs. For uniform transfer, not only the phase relation of dithering beam lines but also adequate waveform were important.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2008년도 학술대회 2부
• /
• pp.140-145
• /
• 2008

모바일 디바이스는 한정된 디스플레이 공간과 인터렉션의 제한적인 요소를 가지고 있다. 모바일 디바이스의 중요한 이슈 중 하나는 이러한 상황에서 어떻게 제조사의 Identity를 표현할 수 있느냐 하는 것이다. 그것은 사용자에게 일관성이라는 측면에서 매력적이기 때문이다. 그러므로 우리는 GUI, IA, AUI 요소에 해당하는 사용자 경험요소들로부터 추출하고 통합하는 작업들을 진행하였다. 이 연구는 각 부서의 실무담당자들이 모여 전사 TF로 진행되었다. 이 연구에서는 대상제품의 다양한 특성을 반영하면서 일관성을 유지하기 위해 여러 방법들과 프로세스들을 거치면서 시도되었다. 이러한 적용 가능한 결과들은 진행되는 본문에서와 같은 논의과정을 거쳐 얻어진 젓이다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1572-1575
• /
• 2005

Poly(vinyl phenol)(PVP)/$TiO_2$ nanocomposite the films have been prepared incorporating metal alkoxide with vinyl polymer to obtain high dielectric constant gate insulating material for a organic thin film transistor. The surface composition, the morphology, and the thermal and electrical properties of the hybrid nanocomposite films were observed by ESCA, scanning electron microscopy (SEM), atomic force microscopy(AFM), and thermogravimetric analysis (TGA). Thin hybrid films exhibit much higher dielectric constants (7.79 at 40wt% metal alkoxide).

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.675-678
• /
• 2003

We studied the electrical characteristics of pentacene-based organic field-effect transistors (FETs) with polymethyl methacrylate (PMMA) or poly-4-vinylphenol (PVP) as the gate insulator. PMMA or PVP was spin-coated on the indium tin oxide glass substrate that serves as gate electrodes. The source-drain current dependence on the gate voltage shows the FET characteristics of the hole accumulation type. The transistor with PVP shows a higher field-effect mobility of 0.14 $cm^{2}/Vs$ compared with 0.045 $cm^{2}/Vs$ for the transistor with PMMA. The atomic force microscope (AFM) images indicate that the grain size of the pentacene on PVP is larger than that on PMMA. X-ray diffraction (XRD) patterns for the pentacene deposited on PVP exhibit a new Bragg reflection at $19.5{\pm}0.2^{\circ}$, which is absent for the pentacene on PMMA. This peak corresponds to the flat-lying pentacene molecules with less intermolecular spacing.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.1-2
• /
• 2003

While aromatic polyimides and polyamides have found widespread use as high performance polymers, the present work addressed the need for organosoluble materials through the use of a hyperbranching scheme. The $AB_2$ monomers were prepared. The $AB_2$ monomers were then polymerized via aromatic fluoride-displacement and Yamazaki reactions to afford the corresponding hydroxyl-terminated hyperbranched polyimides (HT-PAEKI) and amine-terminated hyperbranched polyamides, respectively. HT-FAEKI was then functionalized with allyl and propargyl bromides as well as epichlorohydrin to afford allyl-terminated AT-PAEKI, propargyl-terminated PT-PAEKI, and epoxy (glycidyl)-terminated ET-PAEKI, in that order. All hyperbranched poly(ether-ketone-imide)s were soluble in common organic solvents. AT-PAEKI was blended with a bisphenol-A-based bismaleimide (BFA-BMI) in various weight ratios. Thermal, rheological, and mechanical properties of these blend systems were evaluated. Two characteristic hyperbranched polyamides, which the one has para-electron donating groups to the surface amine groups and the other has para-electron withdrawing groups to the surface amine groups, were selected to compare BMI curing behaviors. The electron rich polymer displayed ordinary Michael addition type exothermic reaction, while electron deficient polymer did display unusual curing behaviors. Based on analytical data, the later system provided the strong evidences to support room temperature curing of BMI by reactive intermediates instead of reactive primary amine groups on the macromolecule surface.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.1034-1040
• /
• 2003

Tension mask is a part of CRT type devices, which is installed right behind glass-made front panel. Numerous slits on the thin metal sheet enable the electron beams emitted from posterior gun to be focused, resulting in enhanced definition. Flattened and enlarged displays necessitate the imposition of pretension on the masks, in order to improve the robustness of display quality against vibration or impact. High temperature assembly process subsequent to pretensioning, however, degenerates creep resistance of mask material, and common mask may become susceptible to undesirable elongation due to creep. Once tensile stress becomes high enough to induce creep deformation, pretension is substantially loosened. In this study, tension mask assembly is modeled as a combined structure of beams and wire array, and a numerical simulation is attempted for pretensioning followed by high temperature process. Based on a model study, creep occurrence is found to be probable and its adverse influence is quantified. As fur maintaining high tensile force, simply increasing pretension does not seem to be helpful. Instead, the structure of frame needs to be modified somehow, or material for mask needs to be selected properly.