• 한국전산구조공학회논문집
• /
• 제20권1호
• /
• pp.39-50
• /
• 2007

본 논문은 다중 적층지반상의 지반-구조물 상호작용 해석을 위한 3차원 무한요소를 소개한다. 본 무한요소는 Cartesian 좌표계에서 정식화되었으며, 수평, 수평모서리, 수직, 수직 모서리 그리고 수평 수직 모서리 무한요소로서 총 5개의 무한요소로서 구성된다 적용한 형상함수 내부의 파동함수들은 적층지반의 파동문제를 효과적으로 모사하며 다중파동성분을 포함하고 있다. 본 요소의 성능을 검증하기 위하여 주파수영역에서 여러 가지 예제해석을 수행하였다. 균질 및 적층지반상 강체기초와 묻힌 케이슨 기초의 무차원 동적 거동(compliance & impedance)을 구하였으며, 기연구자들의 값과 비교 검토하였다.

• 산업기술연구
• /
• 제22권A호
• /
• pp.229-240
• /
• 2002

This paper is an experimental and numerical work of Investigating the bearing capacity of shallow foundation of rubble mound under eccentric loads. Parametric centrifuge model tests at the 50g level environments with the model footings in the form of strip footing were performed by changing the loading location of model footing, relative density and materials for ground foundation. For the model ground, crushed rock sampled from a rocky mountain was prepared with a grain size distribution of having an identical coefficient of uniformity to the field condition. Model ground was also prepared with relative densities of 50 % and 80 %. For loading condition, model tests with and without eccentric load were carned out to investigate the effect of eccentric loads and a numerical analysis with the commertially available software of FLAC was performed. For numerical estimation with FLAC, the hyperbolic model of a nonlinear elastic constitutive relationship was used to simulate the stress-stram constitutive relationship of model ground and a series of triaxial compression test were carried out to find the parameters for this model Test results were analyzed and compared with Meyerhof method (1963), effective area method based on the limit equilibrium method, and a numerical analysis with FLAC.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.329-332
• /
• 1999

The crack of concrete induced by the heat of hydration is a serious problem, particularly in concrete structures such as underground box structure, mat-slab of nuclear reactor buildings, dams or large footings, foundations of high rise buildings, etc.. As a result of the temperature rise and restriction condition of foundation, the thermal stress which may induce the cracks can occur. Therefore the various techniques of the thermal stress control in massive concrete have been widely used. One of them is prediction of the thermal stress, besides low-heat cement which mitigates the temperature rise, pre-cooling which lowers the initial temperature of fresh concrete with ice flake, pipe cooling which cools the temperature of concrete with flowing water, design change which considers steel bar reinforcement, operation control and so on. The objective of this paper is largely two folded. Firstly we introduce the cracks control technique by employing low-heat cement mix and thermal stress analysis. Secondly it show the application condition of the cracks control technique like sidewall of LNG in Inchonl.

• 터널과지하공간
• /
• 제15권4호
• /
• pp.288-295
• /
• 2005

암반은 여러 가지 지질학적 요인에 기인한 역학적 결함을 많이 포함하고 있기 때문에 이방성 거동을 보이는 경우가 대부분이다. 그러므로 안정한 암반구조물이나 암반기초의 설계를 위해서는 이방성 암반에서 응력분포의 특성을 이해하는 것이 매우 중요하다. 이 연구에서는 반무한 평면이방성 지반의 표면에 선하중이 작용할 때 지반에 야기되는 탄성응력 분포의 특성을 고찰하였다. 절리의 강성과 절리의 간격, 경사각이 응력분포 형태에 미치는 영향이 검토되었다. 절리면의 미끄러짐 조건으로 Mohr-Coulomb 식을 가정할 경우, 절리면을 통한 미끄러짐이 발생할 수 있는 영역에 대한 고찰도 수행되었다.

• Earthquakes and Structures
• /
• 제2권3호
• /
• pp.257-277
• /
• 2011

An evaluation is presented of the response of a 3-storey R/C structure during the destructive Lefkada earthquake of 14/08/2003. Key aspects of the event include: (1) the unusually strong levels of ground motion (PGA = 0.48 g, $SA_{max}$ = 2.2 g) recorded approximately 10 km from fault, in downtown Lefkada; (2) the surprisingly low structural damage in the area; (3) the very soft soil conditions ($V_{s,max}$ = 150 m/s). Structural, geotechnical and seismological aspects of the earthquake are discussed. The study focuses on a 3-storey building, an elongated structure of rectangular plan supported on strip footings, that suffered severe column damage in the longitudinal direction, yet minor damage in the transverse one. Detailed spectral and time-history analyses highlight the interplay of soil, foundation and superstructure in modifying seismic demand in the two orthogonal directions of the building. It is shown that soil-structure interaction may affect inelastic seismic response and alter the dynamic behavior even for relatively flexible systems such as the structure at hand.

• Earthquakes and Structures
• /
• 제15권5호
• /
• pp.555-564
• /
• 2018

Allowing structures to uplift in earthquakes can significantly reduce or even avoid the development of plastic hinges within the structure. The permanent deformations in the structure can thus be minimized. However, uplift of footings can cause additional horizontal movements of a structure. With an increase in movement relative to adjacent structures, the probability of pounding between structures increases. This experimental study reveals that the footing mass can be used to control the vertical displacement of footing and thus reduce the horizontal displacements of an upliftable structure. A four storey model structure with plastic hinges and uplift capability was considered. Shake table tests using ten different earthquake records were conducted. Three different footing masses were considered. It is found that the amplitude of footing uplift can be greatly reduced by increasing the mass of the footing. As a result, allowing structural uplift does not necessary increase the horizontal displacement of the structure. The results show that with increasing footing weight, the interaction between structural and footing response can increase the contribution of the higher modes to the structural response. Consequently, the induced vibrations on secondary structure increase.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.293-298
• /
• 1999

The crack of concrete induced by the heat of hydration is a serious problem, particularly in concrete structures such as underground box structure, mat-slab of nuclear reactor buildings, dams or large footings, foundations of high rise buildings, etc.. As a result of the temperature rise and restriction condition of foundation, the thermal stress which may induce the cracks can occur. Therefore the various techniques of the thermal stress control in massive concrete have been widely used. One of them is prediction of the thermal stress, besides low-heat cement which mitigates the temperature rise, pre-cooling which lowers the initial temperature of fresh concrete with ice flake, pipe cooling which cools the temperature of concrete with flowing water, design change which considers steel bar reinforcement, operation control and so on. The objective of this paper is largely two folded. Firstly we introduce the cracks control technique by employing low-heat cement mix and thermal stress analysis. Secondly it show the application condition of the cracks control technique like the subway structure in Seoul.

• 한국지반공학회논문집
• /
• 제19권1호
• /
• pp.121-129
• /
• 2003

층상점토지반의 극한지지력에 대하여 수치해석적 방법을 이용하여 거친 띠기초, 미끈한 띠기초에 대하여 해석을 수행하였다. 유한요소법과 유한차분법(FLAC)을 사용하여 층상점토 기초지반의 파괴거동 및 전반적인 하중-변위관계, 극한지지력에 대하여 수치해석적 방법으로 검토하였다. 해석된 결과를 분석하여보면, 이러한 수치해석적 방법을 통해서 층상점토 지반의 극한지지력, 진행성 파괴거동을 충분히 검토할 수 있음을 보여주었다. 그러나 정도가 높은 해석결과를 얻기 위해서는 수치해석에 큰 영향을 미치는 조절요인(항복함수선택, 해석증분수)과 두 가지 이상의 수치해석적 방법에 의하여 해석결과를 비교 분석하는 것이 필요하다.

• 대한토목학회논문집
• /
• 제13권2호
• /
• pp.121-133
• /
• 1993

본 논문에서는 철근콘크리트 구조물의 합리적인 해석 및 설계를 위하여 진보된 신뢰성해석기법을 정립하기 위한 연구를 수행하였다. 철근콘크리트 구조물은 그 특성상 콘크리트와 철근 등 사용재료의 변동성이 크고, 작용하는 하중도 불확실성을 내포하고 있어 이들 변수의 분산성을 합리적으로 고찰하여야 구조물의 합리적인 안전도를 확보할 수 있다. 본 연구에서는 콘크리트와 철근 등 사용재료와 부재 단연치수의 확률특성을 분석하였고, 이로부터 부재 저항능력의 확률특성을 산정하는 방법을 제시하였다. 또한, 압축과 휨을 함께 받는 부재와 확대기초의 한계상태함수식을 유도하였고, 이를 바탕으로 불변2차모멘트법을 이용한 신뢰성해석을 수행하였다. 본 논문은 앞으로 철근콘크리트 구조물의 합리적인 안전도 확보를 위한 신뢰성해석에 유용한 토대를 제시하고 있다.

• Earthquakes and Structures
• /
• 제4권5호
• /
• pp.471-487
• /
• 2013

Performance of a prototype base isolated building located at Indian Institute of Technology, Guwahati (IITG) has been studied here. Two numbers of three storeyed single bay RCC framed prototype buildings were constructed for experimental purpose at IITG, one supported on conventional isolated footings and the other on a seismic isolation system, consisting of lead plug bearings. Force balance accelerometers and a 12 channel strong motion recorder have been used for recording building response during seismic events. Floor responses from these buildings show amplification for the conventional building while 60 to 70% reduction has been observed for the isolated building. Numerical models of both the buildings have been created in SAP2000 Nonlinear. Infill walls have been modeled as compression struts and have been incorporated into the 3D models using Gap elements. System identification of the recorded data has been carried out using Parametric State Space Modeling (N4SID) and the numerical models have been updated accordingly. The study demonstrates the effectiveness of base isolation systems in controlling seismic response of isolated buildings thereby leading to increased levels of seismic protection. The numerical models calibrated by relatively low level of earthquake shaking provides the starting point for modeling the non-linear response of the building when subjected to strong shaking.