• Journal of Chest Surgery
• /
• v.32 no.11
• /
• pp.1009-1016
• /
• 1999

Background: Minimally invasive direct coronary artery bypass surgery(MIDCAB) has been increasing in interest along with the new techniques in myocardial immobilization for easier and safer procedures. Until the opening of the era of new techniques, adequate accuracy and good patency of grafts were debatable. Our experiences of MIDCAB were studied according to the stages of technical developments. Material and Methods: Since March 1996, 55 patients have undergone MIDCAB procedures. The patients of off-pump CABG(no cardiopulmonary bypass under full sternotomy) were excluded from the study. In the early experience(Stage I), a left anterior small thoracotomy through the left parasternal incision was performed(n=6); then an approach through the lower partial sternotomy was used(Stage II, n=33); and recently, a chest wall elevator for harvesting the internal thoracic artery and the foot plate for myocardial immobilization have been used(USSC, Norwalk, CT)(Stage III, n=16). Result: The surgical procedures of four patients in the Stage II group have been converted to conventional bypass because of the deeply seated left anterior descending coronary artery in two patients, fracture of the calcific lesion in the right coronary artery in one patient, and a cardiogenic shock during hypothermia in the other patient with ventricular dysfunction. Two patients in stage II experienced symptomatic recurrences after surgery and restenosis was verified on angiocardiography. They were managed by interventional procedures. All the other patients were doing well without symptoms, except one patients in Stage II who underwent PTCA procedure for a lesion in the circumflex artery during the follow up period. Conclusion: The new and specialized devices are essential to the development of MIDCAB surgery. MIDCAB and the hybrid procedures in multi-vessel disease are on the way to further development. So far, our experience is limited only to a single device among the many new devices for the purpose.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.3
• /
• pp.283-291
• /
• 2015

Objective : The purpose of this study was to determine the differences in the head and tibial acceleration signal magnitudes, and their powers and shock attenuations between flat-footed and normal-footed running. Methods : Ten flat-footed and ten normal-footed subjects ran barefoot on a treadmill with a force plate at 3.22m/s averaged from their preferred running speed using heel-toe running pattern while the head and tibial acceleration in the vertical axis data was collected. The accelerometers were sampled at 2000 Hz and voltage was set at 100 mv, respectively. The peak magnitudes of the head and tibial acceleration signals in time domain were calculated. The power spectral density(PSD) of each signal in the frequency domain was also calculated. In addition to that, shock attenuation was calculated by a transfer function of the head PSD relative to the tibia PSD. A one-way analysis of variance was used to determine the difference in time and frequency domain acceleration variables between the flat-footed and normal-footed groups running. Results : Peaks of the head and tibial acceleration signals were significantly greater during flat-footed group running than normal-footed group running(p<.05). PSDs of the tibial acceleration signal in the lower and higher frequency range were significantly greater during flat-footed running(p<.05), but PSDs of the head acceleration signal were not statistically different between the two groups. Flat-footed group running resulted in significantly greater shock attenuation for the higher frequency ranges compared with normal-footed group running(p<.05). Conclusion : The difference in impact shock magnitude and frequency content between flat-footed and normal-footed group during running suggested that the body had different ability to control impact shock from acceleration. It might be conjectured that flat-footed running was more vulnerable to potential injury than normal-footed running from an impact shock point of view.

• The Korean Journal of Pesticide Science
• /
• v.2 no.1
• /
• pp.40-45
• /
• 1998

An antagonistic fungus inhibiting growth of various phytopathogenic fungi was isolated from greenhouse soils and identified. Mophological features of fruiting structures on potato dextrose agar and colorless globose to ovate heavy walled hyaline cells from the vegetative mycelium grown on MY20 agar indicate that this antagonist is Aspergillus terreus. The antagonistic activity is due to the production of antifungal compounds. An antifungal compound was purified from its culture filtrate using chloroform extraction, column chromatography, and thin layer chromatography. The purified antibiotic was effective to various phytopathogenic fungi and identified as butyrolactone I. $ED_{50}$ values measured by petri-plate assay through effective dosage(ED)-probit analysis were 9.7, 13.7, 23.3, 42.6 and 102.7 ppm on Botrytis cinerea, Rhizoctonia solani, Pythium ultimum, Phytophthora capsici, and Fusarium oxysporum, respectively.

• Korean Journal of Materials Research
• /
• v.30 no.9
• /
• pp.453-457
• /
• 2020

Tomb No. 1 (Donghachong) of the Buyeo Neungsan-ri Tomb complex (listed as UNESCO World Heritage Site), is a royal tomb of the Baekje Sabi Period. One wooden coffin unearthed there is an important relic of the funerary culture of the Baekje. This study examines the production techniques of gilt-bronze objects attached to the wooden coffin excavated from Donghachong. The base metal of the gilt-bronze object is pure copper, with single α phase crystals in a heterogeneous form containing annealing twins; Au and Hg are detected in the gilt layer. We suggest that the surface of the forging copperplate is gilded using a mercury amalgam technique; it is thought that the annealing twins of the base material formed during the heat treatment process for the sheet metal. The gilt layer is three to five times thicker for the gilt-bronze objects found near the foot of the coffin than those near the head. We estimate the plating process is carried out at least three times because three layers are identified on the plate near the head. Therefore, it is likely that the materials and methods used to construct the gilt-bronze objects found in different parts of the coffin are the same, but the number of platings is different. This research confirms the metal crafting techniques used in Baekje by the examination of production techniques of these gilt-bronze objects. Further, our paper presents an important example of restoration and reconstruction for a museum exhibition, through effective use of scientific analysis and investigation.

• Korean Journal of Applied Biomechanics
• /
• v.29 no.4
• /
• pp.247-254
• /
• 2019

Objective: The goal of this study was to determine the center of pressure (CoP) complexity pattern in approximate entropy technique between genders at different conditions of running speed. Background: It is conducted to evaluate the complexity pattern of CoP in the increment of running speed to have insights to injury prediction, stability, and auxiliary aids for the foot. Method: Twenty men (age=22.3±1.5 yrs.; height=176.4±5.4 cm; body weight=73.9±8.2 kg) and Twenty women (age=20.8±1.2 yrs.; height=162.8±5.2 cm; body weight=55.0±6.3 kg) with heel strike pattern were recruited for the study. While they were running at 2.22, 3.33, 4.44 m/s speed on a treadmill (instrumented dual belt treadmills, USA) with a force plate, CoP data were collected for the 10 strides. The complexity pattern of the CoP was analyzed using the ApEn technique. Results: The ApEn of the medial-lateral and antero-posterior CoP in the increment of running speed showed significantly difference within genders (p<.05), but there were not statistically significant between genders at all conditions of running speed. Conclusion: Based on the results of this study, CoP complexity pattern in the increment of running speed was limited to be characterized between genders as an indicator to judge the potential injury and stability. Application: In future studies, it is needed to investigate the cause of change for complexity of CoP at various running speed related to this study.

• Journal of the Korea Convergence Society
• /
• v.9 no.2
• /
• pp.303-311
• /
• 2018

Squat exercise is one of the free weight exercises that are recognized as important from a bio-mechanical point of view. It is an important exercise to train lower extremity muscles in daily activities or sports activities and to strengthen trunk and lower body strength. It is effective and accurate to use a variety of assistive devices to calibrate athletic posture with squat exercise supported interactive device. The issues of the structural analysis for design a foot plate for squat exercise is to model the behavior by simplifying the dynamic behavior. In this paper, the authors proposed a exercise system design method for the vertical load distribution and bio-mechanical signal process used for the squat exercise mechanism analysis, and based on these results, designed device can make the more safe and reliable free weight exercise. It is applied to system design through design method with kinematic dynamic, VR device and estimation model of exercise.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.96
• /
• pp.209-223
• /
• 2019

The Iron Seated Buddha sculpture in the National Museum of Korea had long sat unregistered in storage at the museum. However, a new accession number "bon9976" has recently been assigned to it. This sculpture was excavated from the neighborhood of Heungnyongsa Temple in Baekun-ri, Yidong-myeon, Pocheon-gun, Gyeonggi-do Province together with another Iron Seated Buddha sculpture(bon9975) called "Iron Buddha from Pocheon." A comparison and examination of Gelatin Dry Plate and official documents from the Joseon Government-General Museum during the Japanese occupation period have revealed that these two Iron Buddha sculptures were transferred to the Museum of the Government-General of Korea on December 17, 1925. The Iron Seated Buddha sculpture(bon9976) has a height of 105 centimeters, width at the shoulders of 57 centimeters, and width at the knee of 77 centimeters. The Buddha is wearing a robe with rippling drapery folds and the right shoulder exposed. He is seated in the position called gilsangjwa(the seat of good fortune) in which the left foot is placed over the right thigh. The features of the Buddha's oval face are prominently sculpted. The voluminous cheeks, eye sockets in a large oval shape, slanted eyes, short nose, and plump lips can also be found in other ninth-century Iron Seated Buddha sculptures at Silsangsa Temple in Namwon, Jeollanam-do Province, Hancheonsa Temple in Yecheon, Gyeongsangbuk-do Province, and Samhwasa Temple in Donghae-si, Gangwon-do Province. Moreover, its crossed legs, robe exposing the right shoulder, and rippling drapery folds suggest that this sculpture might have been modeled after the main Buddha sculpture of the Seokguram Grotto from the eighth century. The identity of this Iron Seated Buddha can be determined using the Gelatin Dry Plate(M442-2, M442-7). In them, the Buddha has its right palm facing upwards and holds a medicine jar on its left palm. Until now, the Iron Seated Bhaiṣajyagura(Medicine) Buddha(bon1970) excavated from Wonju has been considered the sole example of an iron Medicine Buddha sculpture. However, this newly registered Iron Seated Buddha turns out to be a Medicine Buddha holding a medicine jar. Furthermore, it serves as valuable material since traces of gilding and lacquering clearly remain on its surface. This Iron Seated Buddha sculpture (bon9976) is presumed to have been produced around the ninth century under the influence of Esoteric Buddhism by the Monk Doseon(827~898), a disciple of the Monk Hyecheol, to protect the temple and help the country overcome geographical shortcomings. According to the records stored at Naewonsa Temple(later Heungnyongsa Temple), Doseon selected three significant sites, including Baegunsan Mountain, built "protector" temples, created the Bhaisajyagura Buddha triad, and enshrined them at the temples. Moreover, the inscription on the stele on the restoration of Seonamsa Temple states that Doseon constructed temples and produced iron Buddha sculptures to help the country surmount certain geographical shortcomings. Heungnyongsa Temple is located in Dopyeong-ri, Yidong-myeon, Pocheon-si, Gyeonggi-do Province. This region appears to have been related to rituals directed to the Medicine Buddha since Yaksa Temple(literally, "the temple of medicine") was built here during the Goryeo Dynasty, and the Yaksa Temple site with its three-story stone pagoda and Yaksadong Valley still exist in Dopyeong-ri.

• Korean Journal of Community Nutrition
• /
• v.12 no.5
• /
• pp.617-629
• /
• 2007

To ensure the microbiological safety of food items prepared after cooking process, this study was aimed to identify the hazards related with cooked foods donated to foodbanks through quantitative microbial analysis. Five foodbanks located in Incheon and Gyeonggi area among government-dominant foodbanks were surveyed from February to June, 2007. Manager, recipient, donator, type and quantity of donated foot and facility and equipment were examined for the general characteristics of foodbank. The time and temperature of food md environment were measured at steps from after-production to before-distribution, and the microbial analysis was performed mainly with indicator organism and major pathogens. The amount of cooked foods donated to each foodbank was about 20 to 30 servings and consisted of 80% of total donated foods. Only three foodbanks had separate offices for foodbank operation and four institutions had at least one temperature-controlled vehicle. The flow of donated foods was gone through the steps; production, meal service and holding at donator, collection by foodbank, transport (or holding after transport) and distribution to recipients. It took about 3.8 to 6.5 hours at room temperature from after-production to before-distribution. Only aerobic plate counts (APC) and coliforms were found in microbial analysis. The APC after production were relatively high in $8.2{\times}10^5,\;7.4{\times}10^5,\;6.9{\times}10^5$ and $4.2{\times}10^5 CFU/g$ while $2.8{\times}10^6, \;9.4{\times}10^5,\;1.0{\times}10^6$ and $5.4{\times}10^5CFU/g$ before distribution in mixed Pimpinella brachycarpa, mixed chard mixed amaranth and mixed spinach, respectively. The levels of coliforms in mixed chard and mixed spinach were complied with the standards of the Ministry of Education and Human Resources Management The level of APC in boiled pork was increased from $< 1.0{\times}10 CFU/g$ to $4.0{\times}10^2 CFU/g$. One of delivery vessels was shown $6.2{\times}10^3 CFU/100 cm^2$ in APC, which was over the standards for environment. One of serving tables also showed the high level of $1.2{\times}10^3 CFU/100 cm^2$ in APC and $6.6{\times}10^2 CFU/100 cm^2$ in coliforms. These results suggest the sanitary management of holding at donator and the time-temperature control are key factors to ensure the safety of cooked foods donated to foodbank.