• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.4
• /
• pp.32-38
• /
• 2006

A clutch hydraulic system for automotive manual transmissions transfers hydraulic pressure generated by driver's pedal manipulation to the clutch mechanism. The foot effort when the clutch pedal is pushed is different than that when the clutch is returned. The effort or load difference, called hysteresis, is caused by the friction produced between rubber seal and inner wall inside the hydraulic cylinder. This clutch pedal travel foot effort hysteresis is essential for a clutch hydraulic system design and analysis. The dynamic model for a clutch hydraulic system is developed and a simulation analysis is performed to estimate the fiction coefficient as a function of the cylinder pressure. The simulation result is then compared to the measurements obtained from a clutch hydraulic system tester to ensure the reliability of the dynamic model and the coefficients estimated. Also the estimated friction coefficients at various pressure values are compared to those reported by an independent study.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.4
• /
• pp.469-477
• /
• 2010

The purpose of this study was to evaluate the effects of insole-equipped ankle-foot-orthoses (AFO) on gait. 10 healthy males who had no history of injury in the lower extremity participated in this study as the subjects. The foot of each subject was first scanned, and the insole fit to the plantar was made using BDI-PCO(Pedcad Gmbh, Germany). The subject then was made to walk on a treadmill under four experimental conditions: 1) normal walking, 2) walking wearing AFO, 3) walking wearing AFO equipped with the insole, 4) walking wearing pneumatic-ankle-foot-orthosis (pAFO) equipped with the insole. During walking, foot pressure data such as maximum force, contacting area, peak pressure, and mean pressure was collected using Pedar-X system (Novel Gmbh, Germany) and EMG activity of lower limb muscles such as gastrocnemius medial head, gastrocnemius lateral head, and soleus was recorded using MP150 EMG module (BIOPAC System Inc., USA). Collected data was then analyzed using paired t-test in order to investigate the effects of the insole. As a result of the analysis, when insole was equipped, overall contacting area was increased while both the highest peak pressure and the mean pressure were significantly decreased, and EMG activity of the lower limb muscles was decreased. On the contrary, the cases of wearing AFO showed the decreased contacting area and the increased pressures. Therefore, the AFO equipped with a proper insole fit well to the foot can help comfortable walking by spreading the pressure over the entire plantar.

• PNF and Movement
• /
• v.15 no.3
• /
• pp.227-236
• /
• 2017

Purpose: The purpose of this study was to investigate the effects of coordinative locomotor training (CLT) on the foot pressure and balance of patients with scoliosis. Methods: This was a single-case A-B-A study involving two patients with scoliosis. The study was designed to perform repeated measurements as follows: 5 times at baseline (A), 10 times during intervention (B), and 5 times after intervention (A). The study period was 5 weeks, and the CLT program was divided into warm up, CLT program, and cool down stages, at 50 min per stage. For the primary outcome measure, Gait View AFA-50 was used to determine the foot pressure and balance ability. For the secondary outcome measure, the SRS-22 questionnaire was used to assess the quality of life of the patients with scoliosis. Descriptive statistics and visual analysis using graphs were used to compare the rates of change. Results: The results of this study showed that the foot pressure and balance ability of the two subjects improved during the intervention period and remained improved even during the baseline period. However, their quality of life did not change after the intervention. Conclusion: CLT may have a positive effect on foot pressure and balance ability in patients with scoliosis. Also, this body function improvement may have positive effects on the performance of daily activities which employ the upright position.

• Journal of Korean Foot and Ankle Society
• /
• v.24 no.1
• /
• pp.14-18
• /
• 2020

Purpose: Chronic ankle instability is a very common abnormality of the ankle, but there is still controversy regarding its evaluation criteria. The stress view has difficulties in reflecting the patient's symptoms and treatment progress. Therefore, this study examined the relationship between the center of pressure (COP) measured by a pedobarograph and the symptoms of the patient. Materials and Methods: Thirty patients with chronic ankle instability from February to August 2018 were included. Each patient was surveyed with the foot and ankle outcome score (FAOS). The COP was measured with a foot pressure scanner, and the travel distance and ellipse area of the COP were calculated. Each patient was measured on one foot and on two feet with his or her eyes closed and open. The relationship between the COP measurement and FAOS score was analyzed using the Pearson correlation coefficient. Results: The participants were consisted of 21 male and nine female, with a mean age of 30 years, mean weight of 72 kg, and mean foot size of 259 mm. With the eyes open, the correlation coefficient between the FAOS and travel distance of the affected side was -0.394 (p<0.05) and that between the FAOS and the ellipse area of the affected side was -0.425 (p<0.05). On the other hand, no significant correlations were found between the travel distance and ellipse area of the affected side when patients closed their eyes. Conclusion: Measurement of the COP using foot pressure scanner could evaluate objectively patients with chronic ankle instability, with measurements in patients with their eyes open being more significant. Based on the findings of this study, an analysis of the COP with the patients with their eyes open and standing on one foot may help determine the management strategy and assess the progress of the patients.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.224-229
• /
• 2019

This study was undertaken to provide correct posture guidance and reference material for sports injury and injury prevention programs, by analyzing body alignment and plantar pressure distribution in high school baseball players. Totally, 32 subjects were enrolled for the study. Body alignment was measured from the trunk imbalance, kyphotic angle, lordotic angle, pelvic tilt, and pelvic torsion. Foot pressure was measured from the left maximum pressure, right maximum pressure, left weight, and right weight. The mean and standard deviation of the measured factors were calculated and tabulated, and the correlation between body alignment and foot pressure distribution was analyzed using Pearson's correlation analysis. All statistical significance levels were set at 0.05. Body alignment and foot pressure distribution show a positive correlation between the lordotic angle of lumbar spine and the left maximum pressure. There was no correlation between trunk imbalance, kyphotic angle, lordotic angle, pelvic tilt, pelvic torsion, and the left·right weight distribution and the left·right maximum pressure of each foot. Results of this study determined that the increase of the lordotic angle of lumbar spine results in more force on one side of the foot, thereby increasing the maximum pressure. We believe our data could be a reference for exercise programs on physical alignment and plantar pressure distribution of athletes.

• The Journal of the Korea Contents Association
• /
• v.10 no.8
• /
• pp.257-265
• /
• 2010

The purpose of this study was to investigate the effect of different ramp inclination on the maximum plantar foot pressure and pathway of the center of pressure. Fifteen healthy adults who had no musculoskeletal disorders were participated with this study and descended the ramp with different inclination(level, $-5^{\circ}$, $-10^{\circ}$, $-15^{\circ}$). Plantar foot pressures were recorded by the Matscan system(Tekscan, Boston, USA) during level and descending ramp with barefoot. Plantar foot surface was defined as seven regions for pressure measurement; two toe regions, three forefoot regions, one midfoot region, one heel region. Repeated ANOVA was used to compare each region data of foot according to different ramp inclination. As descending ramp inclination became increased, the pressure of hallux region was significantly increased at $-15^{\circ}$ inclination and the pressure of 2-3 metatasal head region were significantly decreased at $-5^{\circ}$, $-10^{\circ}$, $-15^{\circ}$ inclination. The pathway of COP had a tendency to be shifted inside in forefoot and prolonged to great toe as the descending ramp inclination increased. The results indicated that plantar foot pressure could be changed at hallux and forefoot regions with $-5^{\circ}$ ramp inclination and these findings demonstrated that ramp inclination could affect the structure and function of foot.

• Physical Therapy Korea
• /
• v.10 no.1
• /
• pp.77-95
• /
• 2003

Many factors affect foot and ankle biomechanics during walking, including gait speed and anthropometric characteristics. However, speed has not been taken into account in foot kinematics and kinetics during walking. This study examined the effect of walking speed on foot joint motion and peak plantar pressure during the walking phase. Eighty healthy subjects (40 men, 40 women) were recruited. Maximal dorsiflexion and excursion were measured at the first metatarsophalangeal joints during walking phase at three different cadences (80, 100, and 120 step/min) using a three dimensional motion analysis system (CMS70P). At the same time, peak plantar pressure was investigated using pressure distribution platforms (MatScan system) under the hallux heads of the first, second, and third metatarsal bones and heel. Maximal dorsiflexion and excursion and excursion at the ankle joint decreased significantly with increasing walking speed. Peak plantar pressure increased significantly under the heads of the first of the first, second, and third metatarsal bones, and heel with increasing walking speed: three was no change under the hallux. There were no significant changes in maximal dorsiflexion or excursion at the first metatarsophalangeal joint. The results show that walking speed should be considered when comparing gait parameters. The results also suggest that slow walking speeds may decrease forefoot peak plantar pressure in patients with peripheral neuropathy who have a high risk of skin breakdown under the forefoot.

• Physical Therapy Korea
• /
• v.15 no.1
• /
• pp.1-11
• /
• 2008

The purpose of this study was to assess the influence of two shoe size conditions on foot pressure, ground reaction force (GRF), and lower extremity muscle fatigue. Seven healthy men participated. They randomly performed walking and running in two different conditions: proper shoe size and 10 mm greater than proper shoe size. Peak foot pressure, and vertical, anterior and mediolateral force components were recorded with the Parotec system and Kisler force platform. To assess fatigue, the participants performed treadmill running for twenty-five minutes twice, each time wearing a different shoe size. Surface electromyography was used to confirm localized muscle fatigue using power spectral analysis of four muscles (tibialis anterior, gastrocnemius medialis, rectus femoris, and biceps femoris). The results were as follows: 1) In walking conditions, there was a significantly higher peak pressure in the 10 mm greater than proper shoe size insole sensor 1, 2, 14, and 18 (p<.05). 2) In running conditions, there was a significantly higher peak pressure in the 10 mm greater than proper shoe size insole sensor 5, 14, and 15 (p<.05). 3) In walking conditions, there was a significantly higher first maximal vertical GRF in the 10 mm greater than proper shoe size (p<.05). 4) In running conditions, no GRF components were significantly different between each shoe size condition (p>.05). 5) Muscle fatigue indexes of the tibialis anterior and rectus femoris were significantly increased in the 10 mm greater than proper shoe size condition. These results indicate that wearing shoes that are too large could further exacerbate the problems of increased foot pressure, vertical GRF, and muscle fatigue.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.4
• /
• pp.893-902
• /
• 2016

The purpose of this study is to investigate the effect of wearing a weightlifting belt, which is an auxiliary equipment used during squat, by measuring and analyzing biomechanical difference in lower limb and proposing safer and to suggest a more effective exercise method for general population. Selected 8 male participants in their 20s who have not performed regular resistance exercise for at least a year, but have experience of performing squat. The comprehensive method of study is as follows: subjects were notified of the purpose of the study and were told to practice warm-up and the squat motion for the experiment for 20 minutes. When the participant believed they were ready to begin, the experiment was started. At controlled points, foot pressure distribution sensor has been installed. Then left and right feet have been placed on the pressure distribution sensor, from which data for successful squat position that does not satisfy the criteria for failure have been collected and computed with Kwon3D XP program and TPScan program. For data processing of this study, SPSS 21.0 was used to calculated mean (M) and standard deviation (SD) of the analyzed values, and paired t-test has been conducted to investigate the difference before and after wearing the weightlifting belt, with p-value of ${\alpha}<.05$. As for time consumed depending on usage of weightlifting belt in squat, statistically significant difference has been found in P2, which is recovery movement. Lower limb angle depending on usage of weightlifting belt in squat has shown statistically significant difference in E1 foot joint(p<. 001). There has been statistically significant difference in E2 knee joint. Foot pressure percentage depending on usage of weightlifting belt in squat were found to be statistically significant (p<. 01) in both regions of anterior and posterior foot.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.3
• /
• pp.261-268
• /
• 2012

The purpose of this study was to qualitatively analyze pressure intensity and the center of pressure(COP) trajectory according to shoe type. Subjects were ten first-year female university students. The EMED-AT 25/D(Novel, Germany) was used to measure pressure intensity and COP trajectory. The COP Excursion Index(CPEI) was used for within subject test design. Independent variables were bare feet and six types of shoes. Dependent variables were center of pressure trajectory and pressure intensity. Barefeet and five toed shoes had a similar pressure intensity and COP trajectory. COP trajectory for all other shoe types showed a medial wobble at the heel. Pressure intensity for all other shoe types was related to the structure of the shoes. In conclusion, different shoe types can not only affect gait, but they can also influence foot deformities, pain, and dysfunction.