• Journal of Advanced Navigation Technology
• /
• v.17 no.2
• /
• pp.171-176
• /
• 2013

A microstrip-fed miniaturized folded-slot antenna that is cut at the finite ground plane edge for the size reduction is proposed as a ZigBee module operating in the 2.4 GHz frequency band, as specified by the IEEE standard 802.15.4. The antenna is fabricated within space limited to $35mm{\times}9mm$ on a $35mm{\times}35mm$ substrate, which is about the PCB size of a typical wireless ZigBee module. The measured impedance bandwidth and antenna gain are 2.37~2.49 GHz and 2.4 dBi respectively. The measured radiation patterns are similar to conventional folded-slot antennas and are also stable across the pass band. These properties and its compact structure help in making the antenna suitable for ZigBee module.

• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.29.3-29.3
• /
• 2008

1RXS J062518.2+733433. The X-ray data was obtained in April 6, 2006 with the XMM-Newton and the optical data with CCD R filter at the 1m telescope of the Lemonsan observatory in 2005-2006 for 11 nights. This source is classified as a magnetic cataclysmic variable with a spin period of 1187.3 s in the optical region. We determine the spin period to be $1187.26\pm0.11$ s using the X-ray data, which is well consistent with the optical studies. However, we find that the pulse profile of the data (0.2-10 keV) folded at the period is different from the quasi-sinusoidal optical profile and is dependent on the selected X-ray energy bands. The results of period searching with times of extrema will be also presented.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.7
• /
• pp.79-88
• /
• 2018

In the late Koryo Dynasty~early Joseon Dynasty, nationwide distribution of Ondol prompted the formation of ㄱ-shaped corner space. From this background, the spatial form changed according to the space function. In the case where the ondol is located in the bent portion, it would have formed a similar spatial form nationwide at the beginning of the 16th century. Until the middle of the 16th century the receptionists and the family rituals were carried out in the inner of the house, so ㄱ-shaped corner space gradually expanded. Also a special structure type using fultile rafters was used to cover the upper structure of the extended folded space. From the 17th century, ㄱ-shaped corner space was varied from wide and high to narrow and low. In addition to this, the space function of ㄱ-shaped corner is a small hall, a wooden floored room, and the kitchen. And Their spatial form also changes over time.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.11a
• /
• pp.219-222
• /
• 2006

Architecture is builded on the ground and affected environment which include shape of topography and situation. What this study saying is the analysis about the relation between the concept of structural geomorphology and the space modern architecture. As there are many issue about boundary of space and organic architecture, It is important what study about structural geomorphology In paper, we will aware that there are many similarities between architecture and topography. Notion of folded structure in structural geomorphology is connected with continuity or infinity. This is one of many example.

• Journal of architectural history
• /
• v.14 no.2 s.42
• /
• pp.71-88
• /
• 2005

This study aims at clarifying the spatial generative process of Borromini's architecture. The close examination of his sketches and the analysis of his major four works such as San Carlo alle Quattro Fontane (1634-1667), Sant'Ivo della Sapienza (1642-1660), Santa Maria dei Sette Dolori, Chapel (1643-1646), Collegio di Propaganda Fide, Chapel (1652-1667) show common features in the generation of space as follow. 1) The spatial generative process of Borromini's architecture is dominated by the plan of main space which is formulated from simple geometric elements into complexly folded space by mean of union, addition, copy and warping. 2) Borromini made various kinds of annexed space around the main space to create long and continuous circulation. 3) Borromini's architecture has a tendency to divide interior elevation into two parts, wall part and roof part by thick entablature. Moreover the entablature play important role to copy the figure of the plan of main space three-dimensionally. 4) Borromini tried to create the sense of depth through perspectival distortion and multi-focal space through the ceiling pattern.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.293-299
• /
• 2008

If a conventional type of Plastic Board Drain (PBD) is installed to the deep clay deposit, it is subjected to a high lateral earth pressure. a flow channel of PBD may be reduced by the collapse of cores and clogged by the intrusion of filter into the space between cores which are made by lateral pressure. It could decrease the ability of initial discharge capacity and the reliability of long term discharge capacity. A cylindrical plastic board drain (C-PBD) considered in this study consists of cylindrical core and several supports so that it can prevent the reduction of area of flow channel from the higher lateral earth pressure effectively. The discharge capacity of C-PBD was compared to that of a conventional PBD through performing experiments using the composite discharge capacity apparatus which can consider in-situ condition such as penetration of drains, ground settlement and discharge capacity. As a result, C-PBD showed much better performance than PBD in the ability of discharge. It was observed that the C-PBD was folded whereas the conventional PBD was folded after the experiment.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.4
• /
• pp.97-105
• /
• 2012

This study aims to evaluate Rietveld's creative design style and concepts. To this end, I looked into the evaluation of major researchers on Rietveld, classified all his works into four groups according to the design types and analyzed them. As follows: based on the results of the analysis of works I concluded. First, Rietveld created the concept of the spatial extension to the ingenious joint which had the structural node formed of three listels with quadrangular section. It is the design innovation that led to liberate the closed construction. Second, Rietveld had opened up the possibility to neutralize the gravitational three-dimensional works. He subtracted the weight in the direction of gravity from the three-dimensional structure of the works and painted the three primary colors on them partially to get rid of the original material color. Therefore they looked like the forms liberated from gravity. Third, Rietveld ripped off the surfaces of cube through several formative experiments and decomposed the volume into the tesseract. Through this method of realizing the new plastic concepts, he completed the architectural models of weightlessness. Fourth, Rietveld opened the possibility of the realization of the three-dimensional works integrated all space and time in the one-pieced works and the folded works. Fifth, Rietveld steadily experimented and realized the internal and external integration of time and space in his later works.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.5
• /
• pp.105-113
• /
• 2009

In this paper, a vehicle antenna for AM, FM, TDMB, GPS systems was designed and implemented. AM antenna loaded into small space of shark shape was designed by ferrite turn style antenna. For the FM and TDMB antenna, folded monopole antenna which helical is folded was applied. GPS antenna for achieving characteristics both bandwidth and gain improvement was designed microstrip patch that has air substrate and fractal structure. Receiving signal strengths by the measurement were presented for the AM, FM and TDMB antenna. AM signal strength was -65.7dBm, this strength is almost as same conventional pole antenna as -63.4dBm. It can be replaced conventional pole or glass antenna by the studied antenna. Signal strengths for FM and TDMB were -55.66 and -43.50dBm at center frequency, they are 5~10dB higher than conventional antenna. Measurements of bandwidth and gain for the GPS antenna showed 135 MHz under VSWR 2 : 1 and 4.31dBi, gains over GPS band were 3~5dB higher than ceramic patch antenna.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.12
• /
• pp.1007-1012
• /
• 2017

In this study, we performed the deployment test of shape memory polymer specimens for space antenna design. Poly(cyclootene) was cross-linked by dicumyl peroxide to make a PCO shape memory polymer. A miniature specimen with 120 mm diameter for a deployable antenna was fabricated with the PCO shape memory polymer. To investigate the deployment performance, the folded specimen as a temporary shape was heated by two heaters to the $15^{\circ}C$ higher temperature than the glass transition temperature of shape memory polymer. Firstly, the specimen was installed horizontally and tested. The deploying motion was captured by a digital camera and analyzed by a Tracker program. To reduce the effects of gravity, the specimen was installed vertically and tested again. The deployment performance of a shape memory polymer was investigated by comparing the results of horizontal and vertical installation tests.

• Bulletin of the Korean Space Science Society
• /
• 2010.04a
• /
• pp.37.5-38
• /
• 2010

경희대학교 우주탐사학과에서는 우주공간 탐사를 위해 Trio(TRiplet Ionospheric Observatory)-CINEMA(Cubesat for Ions, Neutrals, Electrons and MAgnetic fields)로 명명된 초소형 위성을 개발하고 있다. 과학임무는 지구 저궤도에서 고에너지 입자를 관측하는 것이며, 이를 위해 고에너지 (2~300keV) 입자 검출기와 자기장 측정기가 탑재된다. 저에너지 입자 검출기 시스템인 STEIN(SupraThermal Electrons, Ions, Neutrals)은 $1\times4$ Array의 개선된 실리콘 검출기와 이온, 전자, 중성입자를 분리할 수 있는 정전장 편향기, 그리고 신호를 처리하는 전자회로로 구성되어있다. 설계된 전자회로는 매우 작은 검출기 기판, 아날로그 기판과 디지털 기판으로 이루어져 있고, 475mW 이하의 저 전력으로 동작한다. 또한 2~100keV의 에너지를 1keV이하의 해상도로 30,000event/sec/pixel 까지 관측 할 수 있도록 회로를 설계하였다. 센서로 들어온 입자로 인해 발생한 펄스의 신호는 4개의 아날로그 회로가 담당하게 되는데, Folded cascode amplifier를 배치하여 증폭률을 높인 Charge sensitive amplifier를 통해 신호를 증폭하고, $2{\mu}s$ unipolar gaussian shaping amplifier를 통해 읽기 쉽게 처리된 신호를 상한파고선별기와 하한파고 선별기를 통해 유효 값 여부를 판단하고, 피크 검출기를 통해 피크의 타이밍을 측정한 뒤 신호를 아날로그-디지털 변환 회로를 통하여 8bit의 값으로 나타내어, 입자들의 Spectrum을 측정하게 된다. 크기와 소비전력이 적음에도 검출성능이 우수하기 때문에 이 시스템은 향후 우주탐사 시스템에 있어 매우 중요한 역할을 수행 할 것으로 생각한다.