• Journal of Mechanical Science and Technology
• /
• 제17권9호
• /
• pp.1339-1348
• /
• 2003

Several factors, including peak dp/dt of the ventricular pressure and maximum closing velocity of leaflet have been studied as indices of the cavitation threshold. In the present study, just before closing velocity of the leaflet has been studied as indices of the cavitation threshold, and cavitation erosion on the surface of a mechanical valve was examined by focusing on squeeze flow and the water hammer phenomenon during the closing period of the valve. A simple solenoid-actuated test device that can directly control the valve closing velocity was developed, and opening-closing tests of 3,000 and 40,000 cycles were performed at various closing velocities. There was a closing velocity threshold to occur erosion pitting of valve surface, and its value was about 0.4 m/s in this study. Cavitation-induced erosion pits were observed only in regions where squeeze flow occurred immediately before valve closure On the other hand, the number of the pits was found to be closely related to an area of water hammer-induced pressure wave below the critical pressure defined by water vapor pressure. Therefore, it was concluded that cavitation is initiated and augmented by the two pressure drops due to squeeze flow and water hammer phenomenon, respectively.

• 디지털융복합연구
• /
• 제18권5호
• /
• pp.9-16
• /
• 2020

최근 표준으로 선정된 기술의 특허권을 보유한 사업자가 그 권리를 남용하는 특허매복행위로 인하여 특허기술 표준을 제정하고 활용하는데 있어 상당한 어려움을 발생시키고 있다. 세계 주요국은 특허매복행위 방지를 위한 법적 근거를 마련하고 있지만, 한국의 경우에는 법적 구속력이 매우 미비한 실정이다. 따라서 본 연구에서는 표준특허에 있어 특허매복행위로 인한 문제점과 정책적 해결방안을 마련하고자 다양한 제안을 시도하였다. 특히 국내외 매복특허에 관한 이슈와 사례를 조사하였는데, 법적활용이 가능한 장치와 FRAND 특허권의 남용에 관한 명확한 기준 그리고 특허매복행위 방지를 위해 특허권자에 대한 보상시스템 마련이 필요한 것으로 판단된다.

• 한국정밀공학회지
• /
• 제23권4호
• /
• pp.183-190
• /
• 2006

Digital 3D Real Object Duplication System (RODS) consists of 3D Scanner and Solid Freeform Fabrication System (SFFS). It is a device to make three-dimensional objects directly from the drawing or the scanning data. In this research, we developed an office type SFFS based on Three Dimensional Printing Process and an industrial SFFS using Dual Laser. An office type SFFS applied sliding mode control with sliding perturbation observer (SMCSPO) algorithm for control of this system. And we measured process variables about droplet diameter measurement and powder bed formation etc. through experiments. In case of industrial type SFFS, in order to develop more elaborate and speedy system for large objects than existing SLS process, this study applies a new Selective Dual-Laser Sintering (SDLS) process and 3-axis Dynamic Focusing Scanner for scanning large area instead of the existing f lens. In this process, the temperature has a great influence on sintering of the polymer. Also the laser parameters are considered like that laser beam power, scan speed, and scan spacing. Now, this study is in progress to evaluate the effect of experimental parameters on the sintering process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.177-179
• /
• 2006

This paper presents an analysis architecture of embedded operating systems for wireless sensor network. Wireless multi-hop sensor networks use battery-operated computing and sensing device. We expect sensor networks to be deployed in an ad hoc fashion, with very high energy constraints. These characteristics of multi-hop wireless sensor networks and applications motivate an operating system that is different from traditional embedded operating system. These days new wireless sensor network embedded operating system come out with some advances compared with previous ones. The analysis is focusing on understanding differences of dominant wireless sensor network OS, such as TinyOS 2.0 with TinyOS 1.x.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제36권4호
• /
• pp.135-139
• /
• 2014

Purpose: We review published research on temporomandibular joint (TMJ) total replacement that compares costochondral graft and customized total joint reconstruction (especially TMJ concepts), focusing on effectiveness. Methods: We searched PubMed databases, including prospective, retrospective, case-control or longitudinal studies and significant statistical analysis. In data analysis, we divided outcomes into 'Acceptable' or 'Non-acceptable'. Results: There were seven articles found dealing with costochondral graft and 180 patients. The majority of patients had satisfactory treatment outcomes (n=109, 61%). There were six articles including 275 patients using the alloplastic material TMJ concepts. Almost all patients had satisfactory treatment outcomes (n=261, 95%). Conclusion: Comparing customized total joint reconstruction with costochondral graft, use of TMJ concepts resulted in increased quality of life and fewer complications. In conclusion, we judged that alloplastic material such as TMJ concepts is more effective device in total joint replacement than costochondral graft.

• 한국시스템다이내믹스연구
• /
• 제12권1호
• /
• pp.131-153
• /
• 2011

The purpose of this study is to explore the applicability of the causal maps for estimating creativity. This study assumes that fluency, flexibility, originality and elaboration are elements of creativity; and there are common characteristics between systems and creative thinking. For this study, 30 students from the 5th grade create causal maps which are consisted of the contents of 'the water cycle in the earth'. The causal maps are analyzed and evaluated by focusing on the characteristics of creativity. In way of the marking causal maps based on creativity, each word is scored as 1 point on the basis of 30 points for fluency. Each word which is linked more than one word is scored 3 points for flexibility, but the maximum points are limited as 35 points. In originality, if it is approved each word is worthy as well as originality, it is scored as 10 points on the basis of 40 points. Lastly, each number of cycle loops is scored as 15 points for elaboration, and the maximum scores are limited as 45 points. As is stated above, the limiting of the maximum scores are designed based on corresponded to 10% students of participators. In the result of this study, the students' scores of evaluating creativity applied causal maps show similar patterns from relative point of view to the other results which were evaluated the creativity by credible organ. Consequently, it is recognized that the causal maps have the possibility of being able to estimate quantitatively the creativity.

• Journal of Biosystems Engineering
• /
• 제17권4호
• /
• pp.354-362
• /
• 1992

This study was intended to examine feasibility of sizing and color grading of Fuji apple with black/white image processing system, to develop a device with which the whole surface of an apple could be captured by one camera, and to develop an algorithm for a high speed sorting. The results are summarized as follows : 1. The black/white image processing system used in this study showed a maximum error of 1.3% in area measurement with a reference figure while the focusing point of camera and location of the reference figure were changed within a certain range. 2. As the result of evaluating four automatic image segmentation algorithms with apple images, Histogram Clustering Method was the best in terms of computation time and accuracy. 3. The fast algorithm for analyzing size and coloration of apple was developed. 4. The whole surface of an apple could be captured in an image frame with two mirrors installed on the both sides of the sample. The total area of the image representing the whole surface showed a correlation of 0.995 with the weight of apple. 5. The gray level when a particular band pass filter was mounted on the camera showed high correlation with 'L' and 'a' values of Hunt color scale and could represent the coloration of apple.

• 보건의료산업학회지
• /
• 제5권1호
• /
• pp.125-132
• /
• 2011

In this study investigated what buyers want and expect from medical equipment industry. In this study we found as fellows, (a) The quality of instrument is the most important factors that lead to customer purchase intent and brand image follwed by reliability and efficiency in order; (b) Customers perception of company did not show any meaningful relationship with brand image suggesting company positive image perceived by the customers would not necessarily have a positive impact on brand image. Rather, if brand image customer perceived gets higher, considerably higher purchase intention was observed. Therefore, the findings from the present study suggest that medical instrument manufactures need to focus more on providing a long-term high quality of service marketing strategy to increase customer satisfaction and purchase intent in this competitive business environment.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.538-541
• /
• 2002

탄소나노튜브 (CNT)가 도포된 평면형 에미터와 원형 개구의 게이트 전극을 가지는 삼전극 전계방출 소자의 전계방출 특성을 시뮬레이션하였다. 체계적인 시뮬레이션을 위해 소자 내 전위의 공간적 분포 특정을 결정하는 전계형상인자 $\gamma$를 정의하고 이 값에 따른 전위분포의 특성과 방출 전자의 궤적을 계산하였다. 계산 결과$\gamma$ > 1 인 전압조건에서는 에미터의 가운데를 중심으로 강한 전자방출이 발생하고 전자빔이 구조의 축 방향으로 자체 집속됨을 알 수 있었다. 이렇게 되면 에미터와 게이트의 정렬이 전혀 필요하지 않게 되며 또한 별도의 전자집속회로 없이도 에미터와 양극에 있는 형광체가 1:1 로 대응하는 획기적인 디스플레이 구조를 가능하게 해 준다 적정 전압조건에서 CNT의 전계강화인자 $\beta$의 변화에 따른 총 전류를 계산한 결과，$\beta$ >3000인 CNT를 사용할 경우 실제 소자로서 구현이 가능함을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.608-619
• /
• 2018

As distributed generation (DG) is connected to grid, there is new node-type occurring in distribution network. An efficient algorithm is proposed in this paper to calculate power flow for weakly meshed distribution network with DGs in different load models. The algorithm respectively establishes mathematical models focusing on the wind power, photovoltaic cell, fuel cell, and gas turbine, wherein the different DGs are respectively equivalent to PQ, PI, PQ (V) and PV node-type. When dealing with PV node, the algorithm adopts reactive power compensation device to correct power, and the reactive power allocation principle is proposed to determine reactive power initial value to improve convergence of the algorithm. In addition, when dealing with the weakly meshed network, the proposed algorithm, which builds path matrix based on loop-analysis and establishes incident matrix of node voltage and injection current, possesses good convergence and strong ability to process the loops. The simulation results in IEEE33 and PG&G69 node distribution networks show that with increase of the number of loops, the algorithm's iteration times will decrease, and its convergence performance is stronger. Clearly, it can be effectively used to solve the problem of power flow calculation for weakly meshed distribution network containing different DGs.