• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.518-521
• /
• 2004

The degradation characteristics of MgO protective layer and phosphors have been investigated in terms of the ion-induced secondary electron emission coefficient ${\gamma}$ and static margin of discharge voltages, respectively, in this experiment. The ion-induced secondary electron emission coefficients ${\gamma}$ for the degraded MgO protective layer and phosphors have been studied by ${\gamma}$ -focused ion beam system. The energy of Ne+ ions used is from 80 eV to 200 eV in this experiment. The degraded MgO and phosphor layers are found to have higher ${\gamma}$ than that of normal ones without degradations or aged one. Also, the static margin of discharge voltages for test panels with degraded MgO protective layer and phosphors been found to be seriously decreased in comparison with those of normal ones without degradations.

• Architectural research
• /
• 제10권2호
• /
• pp.37-42
• /
• 2008

This study is to get the proper evaluation of the residual property of reinforced concrete beam exposed to fire. This study focused on the strength resistance and analytical evaluation of RC members exposed high temperature. And this study is the basis analytical research to conduct the other studies. To analysis by the finite element method, the Total-RC program was used to analysis it and the Total-Temp program was also used to analysis the temperature distributions at the section. All of results were compared with the pre-existing experimental data of simple supported beam. Using it, the parameters influencing the structural capacity of the high temperature-damaged RC members and residual strength estimation are investigated. The temperature distribution and the structural capacity at the section are calculated in this step. An application of this method is compared with the heating test result and residual property test for simple supported beam which is subjected to ISO 834 test fire. The results of this study are as follows; 1) The loads-displacement relationship of RC beam, considering initial thermal stress of cross section and heat transfer analysis are estimated comparing analytical value with pre-existing experimental results. 2) by the heating time (0, 1, 2 hours), the results of analysis with parameters show that the load capacity exposing at fire is affected.

• 한국재료학회지
• /
• 제12권1호
• /
• pp.27-35
• /
• 2002

In laser materials processing, localized heating, melting and evaporation caused by focused laser radiation forms a vapor on the material surface. The plume is generally an unstable entity, fluctuating according to its own dynamics. The beam is refracted and absorbed as it traverses the plume, thus modifying its power density on the surface of the condensed phases. This modifies material evaporation and optical properties of the plume. A laser-produced plasma plume simulation is completed using axisymmetric, high-temperature gas dynamic model including the laser radiation power absorption, refraction, and reflection. The physical properties and velocity profiles are verified using the published experimental and numerical results. The simulation results provide the effect of plasma plume fluctuations on the laser power density and quantitative beam radius changes on the material surface. It is proved that beam absorption, reflection and defocusing effects through the plume are essential to obtain appropriate mathematical simulation results. It is also found that absorption of the beam in the plume has much less direct effect on the beam power density at the material surface than defocusing does and helium gas is more efficient in reducing the beam refraction and absorption effect compared to argon gas for common laser materials processing.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.17-22
• /
• 2008

Construction project have extremely high risk in the process of construction owing to unexpected event, like as design amendment. As a result, owner have to endure enormous extra-cost to control the risk and continue to the project having more higher uncertainty. Also, if the structure is completed, it is needed that the structure is protected and maintained continuously during life cycle time to satisfying original aim of structure itself. LCC analysis to calculate cost of structure alternatives divides into two stage, one is design_LCC and the other is maintenace_LCC. But two stages all is needed in the transition deterioration model to calculate more reasonable LCC analysis. This paper developed the model using analysis of FMS contents and survey from professional about Prestressed concrete beam girder bridge(PC Beam bridge)in railway. The model is focused in project level of PC beam because any condition state information for element level analysis can not get up. This paper is intended to use the developed model in LCC analysis of PC Beam bridge in railway and constitute the foundation to perform more deep study in the near future.

• 대한전자공학회논문지SD
• /
• 제37권9호
• /
• pp.31-37
• /
• 2000

광굴절 부피격자에 집속되는 판독빔이 입사될 때 나타나는 각도 선태 특성을 기하학적으로 해석하고 실험결과를 제시하였다. 해석 결과 각도 선택 특성은 판독빔의 입사조건에 의해 결정되며, 기록빔의 입사조건에 독립적인 특성을 보였다. 제시된 각도 선택 특성 이론의 증명을 위해 기록빔의 입사각, 판독비의 폭, 집속렌즈의 초점거리에 대한 각도 선택 특성을 측정하였다. 실험 결과 기록빔의 외부 교차 반각이 8$^{\circ}$, 10$^{\circ}$, 14$^{\circ}$일 때의 각도 선택 특성은 각각 2.632$^{\circ}$, 2.618$^{\circ}$, 2.604$^{\circ}$로 기록 조건에 무관한 특성을 얻은 반면 동일한 기록빔의 입사각에 대해 판독빔의 폭을 9.7mm, 2.11mm로 조정한 경우 2.632$^{\circ}$, 1.588$^{\circ}$의 특성을 보임으로써 판독빔에 의해 각도 선택 특성 제어가 이루어짐을 볼 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제13권6호
• /
• pp.526-532
• /
• 2000

The paste on the glass or fabrication of the PDP(Plasma Display Panel) barrier rib was selectively etched using focused A $r_{+}$ laser(λ=514 nm) and Nd:YAG(λ=532, 266 nm) laser irradiation. The depth of the etched grooves increase with increasing a laser fluence and decreasing a laser beam scan speed. Using second harmonic of Nd:YAG laser(532 nm) the etching threshold laser fluence was 6.5 mJ/c $m^2$ for the sample of PDP barrier rib. The thickness of 180 ${\mu}{\textrm}{m}$ of the sample on the glass was clearly removed without any damage on the glass substrate by fluence of 19.5J/c $m^2$beam scan speed of 20${\mu}{\textrm}{m}$ /s. In order to increase the etch rate of the barrier rib material barrier rib samples heated by a resistive heater during laser irradiation. The heated sample has many defects and becomes to be fragile. This imperfection of the structure compared to the sample without heat treatment allows the effective etching by the focused laser beam. The etch rates were 65${\mu}{\textrm}{m}$/s and 270 ${\mu}{\textrm}{m}$/s at room temperature and 20$0^{\circ}C$, respectively.y.

• Korean Chemical Engineering Research
• /
• 제50권1호
• /
• pp.72-75
• /
• 2012

Strain-free AlGaN/GaN 나노선을 기판에 분산시킨 후 E-beam lithography(EBL)를 이용해 단일 나노선 자외선 센서를 제작하였다. 나노선의 구조적, 광학적 특성을 분석하기 위해 focused ion beam(FIB), photoluminescence, micro-Raman spectroscopy를 이용하여 나노선의 strain 및 형태를 조사하였다. 자외선 센서로서의 특성 여부를 확인하기 위하여 빛을 차단 한 조건과 자외선을 조사하는 조건하에서 current-voltage(I-V) 특성을 측정하였으며 각각 9.0 ${\mu}S$과 9.5 ${\mu}S$의 전기전도도(conductance)를 얻었다. 자외선 조사 조건하에서 excess carrier의 증가로 인해 전기전도도가 약 5%가 향상되었음을 알 수 있었다. 자외선을 반복적으로 조사하는 과정의 실험을 통해 우수한 포화 시간(saturation time)과 감쇠 시간(decay time)을 얻었다. 따라서 AlGaN/GaN 나노선은 자외선 센서로서 많은 가능성을 가지고 있음을 확인하였다.

• 한국광학회지
• /
• 제32권3호
• /
• pp.126-132
• /
• 2021

본 논문에서는 특이 광 투과 현상 센서에서 보조 파장 홀 패턴에 입사되는 광원의 각도 조절을 통해 센서의 민감도를 측정 및 분석하여 이를 극대화할 수 있는 방법을 고안하였다. 입사파 광원을 평행화된 광원과 각도가 서로 다른 두 개의 집속화된 광원 총 3개의 광원을 시스템적으로 설계하여 서로 다른 각도로 보조 파장 홀 패턴에 입사되게 제작하였다. 그리고 증류수(n=1.333)와 굴절률 정합액(n=1.360, 1.380)을 사용하여 투과 스펙트럼을 측정하고 센서의 민감도를 계산한 결과 평행화된 광원을 사용하였을 때 센서의 민감도가 향상됨을 확인하였다.

• 콘크리트학회논문집
• /
• 제18권1호
• /
• pp.135-145
• /
• 2006

In high multistory reinforced concrete buildings, coupled shear walls can provide an efficient structural system to resist horizontal force due to wind and seismic effects. Coupled shear walls are usually built over the whole height of the building and re laid out either as a series of walls coupled by beams and/or slabs or a central core structure with openings to accommodate doors, elevators walls, windows and corridors. A number of recent studies have focused on examining the seismic response of concrete, steel, and composite coupling beams. However, since no specific equations are available for computing the bearing strength of steel coupling beam-wall connections, it is necessary to develop such strength equations. There were carried out analytical and experimental studies to develop the strength equations of steel coupling beam-connections. Experiments were conducted to determine the factors influencing the bearing strength of the steel coupling beam-wall connection. The results of the proposed equations were in good agreement with both test results and other test data from the literature. Finally, this paper provides background for design guidelines that include a design model to calculate the bearing strength of steel coupling beam-wall connections.

• 한국강구조학회 논문집
• /
• 제20권3호
• /
• pp.445-454
• /
• 2008

철골모멘트접합부에 관한 이전의 연구에 의하면 RHS 기둥과 기존의 스캘럽을 가진 접합부실험체의 변형능력은 매우 열등했고, 보단부의 응력집중은 보에서 기둥으로 전달되는 모멘트의 전달효율에 영향을 받는다는 사실을 실험이나 해석적으로 밝혔다. 본 연구는 보강된 RBS 접합부와 용접수평스티프너를 사용한 효고현남부지진 이전에 지어진 모멘트 접합부를 내진보강하는데 주안점을 두었다. 이러한 내진보강은 시공성과 경제성을 고려하여 보의 하부플랜지에만 실시하였다. 접합부의 내진보강방법을 발견하고 이를 향상시키기 위해서 비선형유한요소해석을 통해서 다양한 변수를 바탕으로 한 파라메타 연구를 실시하였다.