• Journal of the Optical Society of Korea
• /
• 제19권2호
• /
• pp.165-168
• /
• 2015

A simple method to determine the focal length of a lens using the Talbot image is presented. This method uses only one grating, requiring neither Moir$\acute{e}$ fringe analysis nor the angle between the gratings. The original Fourier transform was used to access the spectrum beyond the limitation set of the usual fast Fourier transform to determine the (de)magnification accurately enough to be used for the focal length. A set of Talbot images simulated numerically with the Fresnel diffraction integral was used to demonstrate the method. For focal lengths between 5550 mm and 5650 mm, the mean difference between the focal lengths determined from the Talbot images and the true values was 3.3 mm with the standard deviation of the difference being 3.8 mm. The true focal lengths can be recovered with an accuracy of 0.06%.

• 한국레이저가공학회지
• /
• 제7권2호
• /
• pp.1-10
• /
• 2004

This work was attempted to join SCP sheet and STS304 sheet by using Nd:YAC laser beam. SCP sheet has good formability and low cost, while STS304 has excellent corrosion resistance and mechanical properties in high temp. In this experiment, butt joint type was used to develop the tailored blank welding for dissimilar steel. Sheets which have different thermal properties. Computer simulation was conducted to obtain the off-set position for efficient welding by considering laser power, scanning speed, focal length and basic properties. The result showed that the optimum thermal distribution was obtained when the laser beam was irradiated at $0.05{\sim}0.1$ mm off-set toward the SCP sheet side. The experiment was conducted based on the result of computer simulation to show the same optimum conditions. Optimum conditions were 3KW in laser beam power, 6m/min in scanning speed, -0.5mm in focal position, 0.1mm off-set toward SCP. Microhardness test, tensile test, bulge test, optical microscopy, EDS, and XRD were performed to observe the microstructure around fusion zone and to evaluate the mechanical properties of optimum conditions, The weld zone had high microhardness values by the formation of the martensitic structure. Tensile test measured the strength of welded region by vertical to strain direction and the elongation of welded region by parallel to strain direction. Bulge test showed $52\%$ formability of the original materials. Bead shape, grain size, and martensitic structure were observed by the optical microscopy in the weld zone. Detailed results of EDS, XRD confirmed that the welded region was connected of martensitic structure.

• 한국산학기술학회논문지
• /
• 제14권11호
• /
• pp.5385-5391
• /
• 2013

온라인을 기반한 제품의 구매가 활성화 됨에 따라, 소비자들의 제품 디자인에 대한 사실적이고 정확한 정보를 요구하고 있다. 본 연구에서는 제품의 형상정보(3D mesh)와 색/질감정보(image)를 이용하여 텍스쳐 맵핑된 실사적 3차원 모델을 생성하는 효율적인 방법을 제안한다. 3 차원 형상정보에 대응하는 이미지 상의 텍스쳐 좌표 관계를 구하기 위해 오브젝트 좌표계와 카메라 좌표계 사이의 변환행렬, 카메라의 초점거리, 카메라 CCD 와 프레임상의 이미지 사이의 종횡비를 파라미터로 하는 2D-3D 정합을 수행한다. 이러한 2D-3D 정합에 있어 발생하는 연산의 복잡도와 비선형도를 낮추기 위하여, 카메라 내부파라미터 검정단계, 임의의 회전행렬에 대한 임시적 최적 이동 벡터 (TOTV), 회전행렬에 대한 비선형 최적화 단계로 접근한다. 제안하는 방법의 유용성을 시현하기 위해 3차원 컬러 측정기로는 색외관을 획득하기 힘든 메탈릭 페인트 재질로 이루어진 제품에 적용한 구현결과를 보인다.