• Environmental Analysis Health and Toxicology
• /
• v.23 no.3
• /
• pp.201-211
• /
• 2008

This study was performed to find the atmospheric concentrations of organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) at four different heights (l0, 50, 150 and 1,500 cm) using low volume polyurethane foam (PUF) plug air sampler in semi-rural area. ${\alpha}-/{\beta}-/{\gamma}-HCH$ with low molecular weights and Koa (octanol-air partitioning coefficient) in OCPs were similarly high concentrations at all heights, but the other OCPs (p,p'-DDE, p,p'-DDD, p,p'-DDT, Heptachlor epoxide, ${\gamma}$-CHL, ${\alpha}$-CHL, Trans-nonachlor) with high molecular weights and Koa decreased with increasing heights. However, the concentrations of PCBs increased with increasing height.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.825-830
• /
• 1999

The purpose of this study is to improve overall performance of prefoamed lightweight cellular concrete for On-Dol system floor. This study includes 4 sections as follows. \circled1 Analysis of the structural characteristics of On-Dol System focusing on the lightweight cellular concrete insulation layer. \circled2 Establishment of the mixing design equations. \circled3 Development of some admixtures used with foaming agent. \circled4 Improvement of the equipment for onsite production. This study has proven that, compared with the current existing one, the newly developed lightweight cellular concrete has been reduced the usage of cement by 20% and the cracks caused by cement drying shrinkage up to 80% but has shown the increased compression strength by 20% at 7 days curing period. The volume contraction of freshly prepared cellular concrete by the loss of foam was hardly found in newly developed lightweight cellular concrete.

• Composites Research
• /
• v.17 no.2
• /
• pp.21-27
• /
• 2004

In this paper, the polymer concrete using the chemically treated waste paint and polystyrene foam was manufactured and their mechanical properties were evaluated. The compressive strength, specific gravity and water absorption with respect to the volume percents of the waste paint and resin were tested. From the tests, the specific gravities of the polymer concretes using the waste paint were lower than that of the conventional polymer concrete and it was recommended that they can be used for building exterior materials.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.3
• /
• pp.547-553
• /
• 1999

Effects of oligosaccharides substituted for sucrose on the sponge cake quality were investigated. Fructooligosaccharide and isomaltooligosaccharide were used as oligosaccharides. Oligosaccharides decreased batter specific gravity, and increased cake specific volume and expansion ratio, showing that oligosaccharides had higher foaming ability and foam stability than sucrose. Oligosaccharides darkened the crust and crumb color of cakes. Addition of oligosaccharides made cakes darker, softer, more moist and more acceptable as perceived by panels. The acceptability was significantly correlated with crust and crumb color, softness, moistness and flavor(p<0.01). The textural characteristics including hardness, chewiness and gumminess of cakes were decreased by replacing sucrose with oligosaccharides. The hardness, gumminess and chewiness among sensory characteristics were negatively correlated with acceptability(p<0.05). Therefore, oligosaccharides should be a good alternative for sucrose in cake making because the sponge cake quality was greatly improved by partial repacement of sucrose with oligosaccharides.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.77-78
• /
• 2019

Organic insulating materials can cause fatal toxic gases when burned, which can lead to human injury. As a combustible material, the risk of fire spreading is great. Therefore, there is a need for a study on the lightweight cured body for the non-combustible inorganic insulation to replace the flammable organic insulation. This study aims to examine the properties of lightweight foamed concrete according to the dilution concentration of animal foaming agent which forms a closed void when foaming as a part of the experiment to examine the utility of the lightweight foamed concrete as an insulating material. Bubbles occupy a large volume of lightweight foam concrete and have a great influence on the properties. Therefore, the stability of the bubble is very important, and as a result of the experiment, it is determined that 3% of the smallest vesicles are prepared at the proper dilution concentration.

• Plant Journal
• /
• v.10 no.4
• /
• pp.35-41
• /
• 2014

The height and capacity of the thermal storage tank can be decided by the altitude and heat load of the heat supply area. Evaporation in heat pipe can be prevented by pressurizing it with the hydraulic head of the thermal storage tank. In addition, it absorbs the expanded volume from the temperature changes and supplies water to the pipelines in case of the shortage of water. One of the most important roles of the thermal storage tank is a stable heat supply facility. It can control the heat demand by accumulating the surplus heat and supplying in changing heat demand time. The purpose of this thesis is to be helpful for the operation and maintenance of the thermal storage tanks. The study has been carried out for 18 thermal storage tanks, which have been used polyurethane foam as insulation, among 27 tanks in district heating plants. The characteristics of the insulation materials, the reasons for the damages of the insulation and how impact the insulation damages to the corrosion of the thermal storage tank have been studied.

• Journal of Electrochemical Science and Technology
• /
• v.11 no.4
• /
• pp.384-391
• /
• 2020

Due to its characteristics of light weight, high energy density, good safety, long service life, no memory effect, and environmental friendliness, lithium-ion batteries (LIBs) are widely used in various portable electronic products. The capacity and performance of LIBs largely depend on the performance of electrode materials. Therefore, the development of better positive and negative materials is the focus of current research. The application of metal organic framework materials (MOFs) derivatives in energy storage has attracted much attention and research. Using MOFs as precursors, porous metal oxides and porous carbon materials with controllable structure can be obtained. In this paper, rod-shaped Co-MOF-74 was grown on Ni Foam (NF) by hydrothermal method, and then Co-MOF-74/NF precursor was heat-treated to obtain rodshaped Co₃O₄/NF. Ni Foam was skeleton structured, which effectively relieved. The change of internal stress changes and destroys the structural volume of the electrode material and reduces the capacity attenuation. Co₃O₄/NF composite material has a specific discharge capacity of up to 1858 mA h/g for the first time, and a reversible capacity of up to 902.4 mA h/g at a current density of 200 mA/g, and has excellent rate and impedance performance. The synthesis strategy reported in this article opens the way to design high-performance electrodes for energy storage and electrochemical catalysis.

• Computers and Concrete
• /
• v.26 no.1
• /
• pp.75-94
• /
• 2020

The aim of this research is to investigate free vibration of a novel five layer Timoshenko microbeam which consists of a transversely flexible porous core made of Al-foam, two graphen platelets (GPL) nanocomposite reinforced layers to enhance the mechanical behavior of the structure as well as two piezo-magneto-electric face sheets layers. This microbeam is subjected to a thermal load and resting on Pasternak's foundation. To accomplish the analysis, constitutive equations of each layer are derived by means of nonlocal strain gradient theory (NSGT) to capture size dependent effects. Then, the Hamilton's principle is employed to obtain the equations of motion for five layer Timoshenko microbeam. They are subsequently solved analytically by applying Navier's method so that discretized governing equations are determined in form of dynamic matrix giving the possibility to gain the natural frequencies of the Timoshenko microbeam. Eventually, after a validation study, the numerical results are presented to study and discuss the influences of various parameters such as nonlocal parameter, strain gradient parameter, aspect ratio, porosity, various volume fraction and distributions of graphene platelets, temperature change and elastic foundation coefficients on natural frequencies of the sandwich microbeam.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1053-1058
• /
• 2008

Porous medium was considered in the present study for the heat transfer enhancement. This was attributed to its high surface area to volume ratio as well as intensive flow mixing by tortuous flow passages. But when the air or water flow through in the porous medium, it is occurred the pressure drop between inlet and outlet. So in the present study investigated simulation result about the pressure drop in the porous medium before apply to heat exchanger. In this simulation, the thickness of the solid inside the porous medium region was varied 0.2 mm to 0.4 mm. And then the simulation result were compared the pressure drop in the same unit cell ($0.5\;mm{\times}0.5\;mm{\times}0.5\;mm$). To make the analysis model, it was assumed the 14-sided tetrakaidecahedron cell which has long been considered the optimal packing cell first proposed by the Lord Kelvin in 1887. And then the simulation is carried out using by STAR-CCM+ which is commercial software. The simulation result can be showed quantified pressure drop by solid effect in the porous medium.

• Journal of Bio-Environment Control
• /
• v.2 no.1
• /
• pp.37-45
• /
• 1993

The purpose of this research was to develop ideal substrates for the production of good quality tomatoes in bag culture system and also to improve media with low or no environmental pollution by blending and mixing artificial substrate including peatmoss, perlite, vermiculite, granular rockwool, polyphenol resin foam, bark, and smoked rice hull. The highly efficient media proved by experiments were vermiculite, smoked rice hull, polyphenol resin foam, granular rockwool, and perlite, which showed good results in the early growth as well as the marketable yield of tomato in the bag culture. Tomato plants grown in the media mixed with peatmoss, vermiculite and granular rockwool at the ratio of 3 : 1 : 1(by volume) showed the highest marketable yield, and the next at the ratio of 2 : 1 : 1. The perlite-granular rockwool mixtures at the ratio of 2 : 3 and 1 : 4, and the peatmoss vermiculite mixtures at the ratio of 2 : 3 and 3 : 2, seemed to be promising media for bag culture.