• International Journal of Aeronautical and Space Sciences
• /
• 제8권1호
• /
• pp.129-139
• /
• 2007

In this paper, attitude control laws for simultaneous pointing of multiple spacecrafts are considered under a formation flying scenario. The basic approach lies in adaptive feedback gains using relative attitude information or maneuver time approximation for coordinated attitude control. Each control law is targeted to balancing mean motion or to correcting system response to the slowest satellite. The control gain adaptation is constructed by two approaches. The first one is using variable damping gain to manipulate speed of a fast system response, and the second one uses alternate natural frequency of the system under control. The validity and stability of the proposed approaches are examined analytically and tested through numerical simulations.

• 한국항공운항학회지
• /
• 제29권1호
• /
• pp.9-19
• /
• 2021

This thesis researched student pilots at certified flying school to prove several things as follows. First, this study tried to find out the influence of instructor's leader trust to student pilot. Second, this study also tried to investigate the influence of student pilot's psychological stability from leader trust. Third, this study tried to prove the mediation effect of leader trust between flight instructor's transformation leadership and the student pilot psychological stability. The result of empirical research are as follows. First, the result of the verification of the relationship between transformative leadership and trust of leader showed that transformative leadership has a positive (+) influence to trust of leader. Second, the result of verification between leader trust and psychological stability relationship showed that trust of leader gives positive(+) influence to psychological stability. Third, the result of verification between transformative leadership and psychological stability showed that trust of leader gives positive(+) influence to psychological stability. I discussed implication from this study at the end and presented future research direction.

• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2016년)
• /
• pp.4-8
• /
• 2016

본 연구에서는 플라잉 디스크를 이용하여 회전 운동의 유무에 따른 공력특성의 변화를 비교 분석하였다. 회전 운동이 발생하면 표면에 비대칭적으로 압력이 분포하기 때문에 롤링 모멘트가 발생하고 마그너스 효과로 측력이 발생하고 피칭모멘트, 회전감쇠모멘트가 발생하고 롤 안정성이 증가한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3080-3085
• /
• 2007

Shape optimization of the 3-dimensional WIG airfoil with 3.0-aspect ratio has been performed by using the multi-objective genetic algorithm. The WIG ship effectively floating above the surface by the ram effect and the virtual additional aspect ratio by a ground is one of next-generation and cost-effective transportations. Unlike the airplane flying out of the ground effect, a WIG ship has possibility to capsize because of unsatisfying the static stability. The WIG ship should satisfy aerodynamic properties as well as a static stability. They tend to strong contradict and it is difficult to satisfy aerodynamic properties and static stability simultaneously. It is inevitable that lift force has to scarify to obtain a static stability. Multi-objective optimization technique that the individual objectives are considered separately instead of weighting can overcome the conflict. Due to handling individual objectives, the optimum cannot be unique but a set of nondominated potential solutions: pareto optimum. There are three objectives; lift coefficient, lift-to-drag ratio and static stability. After a few evolutions, the non-dominated pareto individuals can be obtained. Pareto sets are all the set of possible and excellent solution across the design space. At any selections of the pareto set, these are no better solutions in all design space

• 한국운동역학회지
• /
• 제17권2호
• /
• pp.167-176
• /
• 2007

The purpose of this study was to offer suitable model for performing Tippelt motion and data for training Tippelt motion through the quantitative kinematical analysis of Tippelt motion in parallel bars. The results of analysing kinematic variations through three-dimensional reflection analysis of three members of the national team as the objects of the study were shown as follows. 1. It seemed that the shoulder-joints which are stretched as much as possible affects the whole Tippelt motion while one is swinging downward. The time of process of the center of mass for the body reaching to the maximum flection point should be quick and body's moving from the vertical phase to the front direction should be controled as much as possible. 2. While one is swinging upward, the stability of flying motion could be made certain by the control of body's rapid moving to the front direction and stretching shoulder-joints and hip-joint to reverse direction. 3. While one is flying upward, the body should be erected quickly and lessening the angle of the hip-joint affects the elevation of flight. When the powerful counter turn motion is performed, the stable motion could be made. As a result of this study, It seems that sudden fall and the maximum stretch of shoulder-joints is important during performing Tippelt motion in parallel bars. Also, it concludes that the maximum bending of hip-joints at the starting point of upward swing, sudden stretch to the reverse direction of shoulder-joints and hip-joints when one is leaving bars, control of body's moving to the front direction, and lessening the angle of hip-joints at the flying phase is important.

• 제어로봇시스템학회논문지
• /
• 제13권7호
• /
• pp.637-648
• /
• 2007

This paper presents a sensor fusion method based on indirect Kalman filter(IKF) for error compensation of low-cost inertial sensors and its application to the determination of attitude and position of small flying robots. First, the analysis of the measurement error characteristics to zero input is performed, focusing on the bias due to the temperature variation, to derive a simple nonlinear bias model of low-cost inertial sensors. Moreover, from the experimental results that the coefficients of this bias model possess non-deterministic (stochastic) uncertainties, the bias of low-cost inertial sensors is characterized as consisting of both deterministic and stochastic bias terms. Then, IKF is derived to improve long term stability dominated by the stochastic bias error, fusing low-cost inertial sensor measurements compensated by the deterministic bias model with non-inertial sensor measurement. In addition, in case of using intermittent non-inertial sensor measurements due to the unreliable data link, the upper and lower bounds of the state estimation error covariance matrix of discrete-time IKF are analyzed by solving stochastic algebraic Riccati equation and it is shown that they are dependant on the throughput of the data link and sampling period. To evaluate the performance of proposed method, experimental results of IKF for the attitude determination of a small flying robot are presented in comparison with that of extended Kaman filter which compensates only deterministic bias error model.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.473-477
• /
• 2005

This paper presents a highly efficient HDD (Hard Disk Drive) spindle motor with a passive magnetic thrust bearing and a fluid dynamic journal bearing and its effectiveness is verified through experiment. It eliminates the mechanical friction loss of a thrust bearing which is around 18% of total power consumption of a 3.5' HDD spindle motor, by replacing a conventional fluid dynamic thrust bearing with a passive magnetic thrust bearing. The passive magnetic thrust bearing using permanent magnets is inherently unstable in radial direction. However, the radial fluid dynamic force of the fluid dynamic journal bearing counterbalances the radial magnetic force of magnetic thrust bearing to achieve the stability as the motor spins up. It has less or equivalent runout and less flying height than the conventional spindle motor.

• 한국항공우주학회지
• /
• 제40권8호
• /
• pp.678-687
• /
• 2012

우천, 안개 낀 날씨 및 먼지 등에 의해 시계가 확보되지 않는 비행 환경에서의 헬리콥터의 안정성(stability) 및 비행성(flying quality)을 향상시키기 위해 모델 역변환 제어(Model Inversion Control) 방식의 전자식 비행제어시스템(Fly-By-Wire Flight Control System)의 적용은 필수적이다. 선진 항공사인 미국의 Bell-Sikorsky사와 유럽 컴소시움인 NHI(NH Industries)사는 FBW 비행제어시스템을 V-22와 NH-90의 헬리콥터 양산에 적용한 바 있다. 본 논문에서는 BO-105 모델을 기반으로 CONDUIT(Control Designer's Unified Interface)을 활용하여 제자리 비행영역에서 모델 역변환 비행제어법칙을 설계하였으며, 헬리콥터 비행조종성 국제규격인 ADS-33E-PRF을 기준으로 평가하였다. 설계된 비행제어법칙을 CONDUIT과 HETLAS(HElicopter Trim Linearization And Simulation)를 기반으로 평가한 결과, ADS-33E-PRF에서 제시하고 있는 예측 조종성(predicted handling quality) 규격에 대해 비행조종성 Level 1을 만족시킬 수 있었다.

• 한국항공우주학회지
• /
• 제40권3호
• /
• pp.251-257
• /
• 2012

무인기 및 유인기의 자동비행제어기는 다양한 비행성 규정, 안정도 여유 및 시간응답 특성에 대한 요구조건을 만족할 수 있도록 설계되어야 한다. 기존의 제어기 설계과정은 많은 시간과 시행오차를 수반하기 때문에 최적화 알고리즘을 활용하면 다양한 요구조건들을 충족시키는 제어기를 효율적으로 설계할 수 있다. 본 논문에서는 통합 최적화 제어설계 프로그램인 CONDUIT을 소형 무인기의 횡운동 SCAS 설계에 적용하여 그 효용성을 제시하였다. 최적화를 통해 설계된 롤 자세각 및 방위각 제어기는 시간응답특성만을 고려하여 설계한 기본제어기와 성능을 비교하고 분석하여, 최적화 기법을 적용한 제어기의 성능이 우수하고 다양한 비행성 요구조건을 충족시킬 수 있음을 확인하였다.

• 한국항공우주학회지
• /
• 제47권2호
• /
• pp.114-121
• /
• 2019

무미익 항공기는 꼬리 날개가 없기 때문에 일반적인 형태의 항공기에 비해 피탐성 낮으나 안정성이 좋지 않아 제어기를 설계하는 것이 쉽지 않다. 특히 비행 중에 임무장비 투하나 연료 소모 등에 의해 무게중심의 위치가 변화하는 것을 고려한다면 제어기 설계는 더욱 더 어렵게 된다. 본 논문에서는 이러한 문제점을 극복하기 위한 방법으로 L1 적응제어 방식을 제안하며 비선형 시뮬레이션을 통하여 제어기의 안정성과 성능을 검증하였다. 설계지표 선정을 위해 RPV Flying Quality Design criteria의 내용을 참고하였다. 시뮬레이션을 이용하여 급격한 관성량의 변화에 대해 설계된 적응제억기가 무미익 항공기 안정성을 유지하는 것을 보이고, 이득 스케쥴링 기법과 함께 사용 시 계산량이 줄어들 수 있음을 확인하였다.