• International Journal of Concrete Structures and Materials
• /
• 제8권4호
• /
• pp.315-326
• /
• 2014

This study evaluates the dosages of Class F fly ash, lithium nitrate and their combinations to suppress the excessive expansion caused by alkali-silica reactivity (ASR). In order to serve the proposed objective, the mortar bar specimens were prepared from (1) four dosages of Class F fly ash, such as 15, 20, 25 and 30 % as a partial replacement of Portland cement, (2) up to six dosages of lithium nitrate, such as lithium-to-alkali molar ratios of 0.59, 0.74, 0.89, 1.04, 1.19 and 1.33, and (3) the combination of lithium salt (lithium-to-alkali molar ratio of 0.74) and two dosages of Class F fly ash (15 and 20 % as a partial replacement of Portland cement). Percent contribution to ASR-induced expansion due to the fly ash or lithium content, test duration and their interaction was also evaluated. The results showed that the ASR-induced expansion decreased with an increase in the admixtures in the mortar bar. However, the specimens made with the both Class F fly ash and lithium salt produced more effective mitigation approach when compared to those prepared with fly ash or lithium salt alone. The ASR-induced expansions of fly ash or lithium bearing mortar bars by the proposed models generated a good correlation with those obtained by the experimental procedures.

• 한국결정성장학회지
• /
• 제5권4호
• /
• pp.414-422
• /
• 1995

석탄회를 요업원료로 재활용하기 위하여 하소 및 수비에 의하여 선별화 하였으며, 선별화의 영향을 고찰하기 위하여 비처리 석탄회와 하소 및 수비 처리한 석탄회의 결정상, morphology, 화학성분, 입도분포, 강열감량을 측정하였다. 또한, 기존의 점토 수비 실험식이 석탄회의 수비에도 적용될 수 있는지 여부를 조사하였다. 점토에 대한 수비 실험식을 석탄회의 수비에 적용한 결과 Rittinger의 실험식과 비교적 잘 일치하였다. 처리조건에 관계없이, 석탄회는 mullite와 quartz가 주결정을 이루고, 비처리 및 수비 처리한 석탄회에서는 calcite 결정이 관찰되었으나 하소한 경우 calcite의 결정 peak가 나타나지 않았다. 입자의 형태는 비처리 석탄회의 경우 cenosphere, coke type, silicate type, whisker type, aggregate type 입자로 이루어져 있고 하소한 경우에는 coke type 입자가 제거되고 상대적으로 aggregated type 입자가 많이 관찰되었다. 특히 수비 4단계의 경우에는 비교적 구형의 cenosphere가 많이 얻어졌다. 하소에 의해 입도분포가 좁아졌으며, 특히 수비에 의해서 매우 좁은 입도분포를 얻었다.

• 자원리싸이클링
• /
• 제19권2호
• /
• pp.3-9
• /
• 2010

대부분의 화력발전소에서 전기집진기의 각각의 호파에서 포집된 fly ash는 하나의 라인으로 수송되어 fly ash 원분 사이로에 저장된다. 필요량은 분급장치에 공급되어 기류식 분급기에 의해 정제회와 조분으로 분리되어 각각의 사이로 등에 저장된다. 그러나 전기집진기의 호파에 포집된 fly ash는 전기집진기의 후단 호파일수록 비표면적이 커지는 등 fly ash의 성질이 다르므로 전기집진기 호파 위치 자체가 분급 효과가 있는 것으로 생각할 수 있다. 본 연구는 화력발전소의 전기집진기 각각의 호파에서 채취한 fly ash의 물리적, 화학적, 광물학적 성질을 조사하여 전기집진기가 분급기로서의 가능성을 검토하였다. 그 결과 새로운 fly ash 분급 프로세스로 전기집진기의 호파의 위치별 채취를 제안하고 분급능력이 있다는 것을 확인하였다. 그리고 기류식 분급기로는 얻을 수 없는 고품질 fly ash를 획득하는 것도 가능하였다.

• 대한의생명과학회지
• /
• 제24권2호
• /
• pp.125-129
• /
• 2018

Megaselia scalaris, also known as the scuttle fly, has a humpbacked morphology and was categorized as an insect undergoing complete metamorphosis. Megaselia scalaris was reported to be found in diverse environments. Recently, the scuttle fly has been a focus of studies by forensic scientists, geneticists, and developmental biologists. However, detailed research into scuttle fly development is still unclear. Therefore, the current study has been performed to elucidate the development of Megaselia scalaris. The scuttle fly undergoes four distinct stages of development: egg, larva, pupa and adult fly. After mating, the scuttle fly eggs hatch within one day and become larvae. The newly generated larvae go through 1, 2, and 3 instar stages within a period of 5~10 days. The instar stage 1 takes 1~2 days, instar stage 2 takes 1~2 days, and instar stage 3 takes 3~5 days. Depending on the environmental temperature, the pupae stage takes approximately 10~15 days to complete. The pupa stage can be divided into five sub-stages: 1~3 days, 4~6 days, 7~9 days, 10~12 days and 13~15 days. After molting, the newly formed adult scuttle fly can fly after one day. The morphological characteristics of the scuttle fly during each stage of development was detailed within this study.

• 대한건축학회논문집:구조계
• /
• 제34권3호
• /
• pp.37-42
• /
• 2018

The use of fly ash in construction materials is increasing worldwide due the various advantages of using it, such as to produce durable concrete, or to use less cement and thus lower carbon dioxide emissions. The quality of fly ash is often determined by loss on ignition value (LOI), where an upper limit of LOI is set in each country for quality control purpose. However, due to many reasons, production of high LOI fly ash is increasing that cannot be utilized in concrete, ending up in landfill. In this study, the effect of fly ash use in cementitious materials on nitrogen oxides adsorption is examined. In particular, the effect of using high LOI, and thus high carbon content fly ash on nitrogen oxides adsorption is investigated. The results suggest that the higher carbon content fly ash is related to higher nitrogen dioxide adsorption, although normal fly ash was also more effective in nitrogen dioxide adsorption than ordinary portland cement. Also, higher replacement rate of up to 40% of fly ash is beneficial for nitrogen dioxide adsorption. These results demonstrate that high carbon fly ash can be used as construction materials in an environmentally friendly way where strength requirement is low and where nitrogen oxides emissions are high.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표회 논문집(I)
• /
• pp.48-53
• /
• 1998

The purpose of this study to fine the mixture of concrete for Top-Down method. As a result, In fresh concrete, slump value and slump-flow value were increased as fly ash concrete(10% ratio). When plasticizer was added 1.5% by weigh of binder in concrete, no fly ash concrete and fly ash concrete(10% ratio) all occurred segregation. And, no fly ash concrete and fly concrete(10% ratio) all showed compressive strength development close plain concrete as increasing plasticizer quantity. Especially, in case of 1.5% plasticizer of binder showed high compressive strength development.

• 한국재료학회지
• /
• 제27권2호
• /
• pp.76-81
• /
• 2017

Recently, there have been many efforts to establish suitable processes for recycling fly ash, which is produced in thermal power plants and which poses serious environmental problems. Use of fly ash as a major ingredient of ceramic tiles can increase fly ash utilization, as well as reduce the cost of raw materials in ceramic tile production. In this study, the effects of fly ash addition on ceramic tile properties such as bending strength, water absorption and porosity were investigated. A manufacturing process of ceramic tile was developed for utilization of fly ash with high carbon content. In this approach, it is important to hold the ceramic tiles at a temperature that is sufficient for carbon oxidation, before the pores supplying oxygen to the inside of the ceramic tile are sealed. Ceramic wall tiles were manufactured with 0-40wt% of fly ash addition. The water absorption and porosity of the fired body were slightly changed with increasing fly ash content up to 30wt% and decreased with greater amounts of fly ash addition. The bending strength of ceramic tile including 10wt% fly ash increased, reaching a level comparable to that of ceramic tile without fly ash.

• 한국구조물진단유지관리공학회 논문집
• /
• 제3권2호
• /
• pp.191-198
• /
• 1999

The purpose of this study is investigating characteristics of the concrete containing Fly-ash according to different 4 mix design, that is, the first mix design is partial replace Fly-ash of cement, second is partial replace Fly-ash of cement and fine aggregate, third is partial replace Fly-ash of fine aggregate, fourth partial replacement of fine and coarse aggregate. For this purpose, selected test variables were water-binder ratio with two levels of 45%, 50%, and Fly-ash contents with four levels 0%, 10%, 20%, 30%, As the result of this study are as follow. 1) The result of mix design of a partial replacement of cement, the slump-flow value was appeared a promotive effect of viscosity. But in case of the over with Fly-ash 10% and the other mix design was not changed slump value. 2) The unit weight of the mixing rate with Fly-ash 0% was $1.875{\sim}1.884t/m^3$, the other mix design 10% over with Fly-ash was $1.846{\sim}1.615t/m^3$, the difference was appeared less about 15% than that. 3) In design, partial replace Fly-ash of fine aggregate, this compressive strength was appeared that the concrete age after 7 days was higher than in partial replacement of cement, therefore, the default of a concrete with Fly-ash, that is the earlier compressive strength was to lessen, was improved. 4) The thermal conductivity of the all mix design was $0.447{\sim}1.144kcal/mh^{\circ}C$, this value was as good as a lightweight aggregate concrete.

• 한국건축시공학회지
• /
• 제8권5호
• /
• pp.59-65
• /
• 2008

In the evaluation method of KS on the activity factor of fly ash, same amount of cement should be replaced with fly ash. Therefore, contradictory effects on concrete strength exist, i. e. strength decease due to low content of cement and strength increase of strength due to filling-pore-function of fly ash. European Committee for Standardization (CEN) specifies the method 1 to 4. adding fly ash without reducing the content of cement, for the evaluation method on activity factor of fly ash. This study investigates the applicability of the method 2 of CEN to mix design of concrete. The followings are derived ; There is a key ratio of f)y ash mixing which enhances the incremental ratio of mixing water to improve fluidity of mortar. The incremental ratio of mixing water is maximized about 11% ratio of fly ash mixing. Compressive strength most slightly increases at that ratio of fly ash mixing. Activity factor of fly ash increases as water-cement ratio becomes low and contents of fly ash becomes high. Moreover, quality of fly ash and condition of mix design affect the applicable amount of fly ash and available range of water-cement ratio. However, this method has some problems for practical purpose because activity factors of fly ash for some cases are over 1.0. Further research should be conducted to develop more useful method of evaluating activity factor of fly ash.

• 한국농공학회논문집
• /
• 제46권5호
• /
• pp.99-106
• /
• 2004

Although fly ash has possesses viable engineering properties, an overwhelming majority of fly ash from coal combustion is still placed in storage or disposal sites. This study was undertaken to investigate the physical and mechanical properties of clay-fly ash mixture and to furnish engineering data when fly ash utilized as engineering materials. This paper includes geotechnical properties of fly ash, clay-fly ash mixtures and results of compaction test, unconfined strength test, direct shear test, leaching test and stability analysis of clay-fly ash bank slope. If proper amount of fly ash was put in clay, the clay-fly ash mixture has an increase of unconfined strength and stability of bank slope.