• 한국추진공학회지
• /
• 제7권3호
• /
• pp.8-14
• /
• 2003

KSR-III 축소형 엔진을 원형으로 하는 8채널형 칼로리미터의 냉각성능해석을 수행하였다. 축대칭 압축성 해석을 통해서 연소실 벽으로의 열유속을 예측하였으며 이를 이용하여 3차원 냉각유로 내부의 열전달 해석을 수행하였다. 연소실 벽으로의 열유속은 문헌에서 제시하는 수준으로 확인되었으며 열전달 해석을 통하여 칼로리미터 개발과 운용에 필요한 냉각수의 압력강하, 온도상승 및 연소실벽의 최고온도를 제시하였다. 연소실 압력증가에 따른 냉각요구량을 결정하였으며 냉각수의 물성변화에 의한 냉각성능 변화를 예측하였다.

• 한국농림기상학회지
• /
• 제5권2호
• /
• pp.94-100
• /
• 2003

토양으로부터의 $CO_2$ 방출은 생태계의 탄소 순환에 중요한 위치를 차지한다. 주요 생태계의 순 $CO_2$ 교환과 일차 생산량 등을 정확히 산출하려면 군락 $CO_2$ 플럭스와 더불어 토양 $CO_2$ 플럭스의 관측이 함께 이루어져야 한다. 본 논문에서는 닫힌 역학 챔버 시스템을 활용한 토양 이산화탄소 플럭스의 관측 방법을 간략히 검토하고, 한반도 주요 생태계에 구축된 한국 타워 플럭스 관측 지역망(KoFlux)의 거점 관측소에서 예비 관측된 결과와 서로 다른 관측 시스템간의 상호비교 결과를 보고하고자 한다.

• 한국대기환경학회지
• /
• 제13권6호
• /
• pp.451-461
• /
• 1997

The soil NO flux measurements in Korea were made from 17 May 1997 to 16 June 1997 on grass land at Kunsan National University in southwestern Korea by using flow-through chamber technique. The experiment was conducted in an effort to determine the role of natural emissions of NO on rural atmospheric photochemistry, and to understand the soil NO emission mechanism with respect to soil parameters. Soil NO fluxes were measured every minutes and averaged in every 15 minutes as well as soil temperature. Soil samples were analyzed for $NO_3^-, NH_4^+$, and moisture in soil. Soil nitrate was not detected in most times, and total N-containing was limited in site soils. There was a optimum range of soil moisture and temperature for soil NO flux. The overall average of soil NO emission rates were found to be 1.30 $\pm 0.92 ngNm^{-2}s^{-1}$ (n=1219), and ranged from 0.01 ngNm^{-2}s^{-1}$ to 5.62 ngNm^{-2}s^{-1}$. Diurnal variation of soil NO emission was typical, which was in higher level during daytime, and was in lower level over the night. NO flux showed a strong soil temperature dependence $(r^2=0.78)$, but not with soil moisture and soil N-containing during this experimental period; NO fluxes increased exponentially as soil temperature increased. In order to assure the relevant relationship between soil NO flux and the soil parameters, long-term soil flux measurement on different types of land use should be planned and conducted continuously.

• Journal of Pharmaceutical Investigation
• /
• 제31권4호
• /
• pp.273-279
• /
• 2001

The purpose of this study is to characterize the iontophoretic transport of growth hormone releasing peptides (GHRP-6) through hairless mouse skin from aqueous solution. The effect of various factors, such as pH, poloarity, current profile, current density, current duration, ionic strength, drug concentration, and enhancer application was studied to obtain basic knowledge on the transport. We have also studied the stability of GHRP-6 in solution with/without current. The donor chamber was filled with phosphate buffer solution containing GHRP-6 and the receptor chamber was filled with phosphate buffer solution (pH 7.4). Ag/AgCl electrode was used for their stability and reversibility. At a predetermined time interval, sampling was made and the concentration of drug was analysed using HPLC system. The results showed that, compared to passive flux, the total amount of drug transported increased markedly by the application of anodal current. Cathodal flux was similar to passive flux. Flux increased with the current density, the duration of current application and drug concentration. The effect of enhancers on the flux was studied using hydrophilic (5% N-methyl pyrrolidone) and hydrophobic (5% propylene glycol monolaurate, 5% oleic acid) enhancers. Application of enhancer also increased the flux.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.168-174
• /
• 2000

This paper illustrates the validity of reciprocating type superadiabatic combustor as a industrial applicable dryer. After the investigations of inner and surface temperature distributions of combustor various with air-fuel(methane) ratio, mixture flow rate and reciprocating time, this combustor can be applied in industrial dryer at certain operating conditions. The results are as follows. 1) Higher equilivalence ratio emits more radiation heat flux at the censer chamber 2) Higher mixture flow rate makes more uniform temperature distribution. however, due to the heat transfer from censer chamber to porous media, the radiation beat flux is worse. 3) Longer reciprocating time emit more radiation heat flux. however, this case also makes temperature distribution wide

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2010년도 춘계학술대회 논문집
• /
• pp.263-264
• /
• 2010

• 한국대기환경학회지
• /
• 제16권5호
• /
• pp.499-509
• /
• 2000

Next to carbon dioxide, methane is the second largest contributor to global warming among anthropogenic greenhouse gases. Methane is emitted into the atmosphere from both natural and anthropogenic sources. Natural sources include wetlands, termites, wildries, ocean and freshwater. Anthropogenic sources include landfill, natural gas and oil production, and agriculture. These manmade sources account for about 70% of total global methane emissions; and among these, landfill accounts for approximately 10% of total manmade emissions. Solid waste landfills produce methane as bacteria decompose organic wastes under anaerobic conditions. Methane accounts for approximately 45 to 50 percent of landfill gas, while carbon dioxide and small quantities of other gases comprise the remaining to 50 to 55 percent. Using the closed enclosure technique, surface emission fluxes of methane from the selected landfill sites were measured. These data were used to estimate national methane emission rate from domestic landfills. During the three different periods, flux experiments were conducted at the sites from June 30 through December 26, 1999. The chamber technique employed for these experiments was validated in situ. Samples were collected directly by on-site flux chamber and analyzed for the variation of methane concentration by gas chromatography equipped with FID. Surface emission rates of methane were found out to vary with space and time. Significant seasonal variation was observed during the experimental period. Methane emission rates were estimated to be 64.5$\pm$54.5mgCH$_4$/$m^2$/hr from Kimpo landifll site. 357.4$\pm$68.9mgCH$_4$/$m^2$/hr and 8.1$\pm$12.4mgCH$_4$/$m^2$/hr at KwanJu(managed and unmanaged), 472.7$\pm$1056mgCH$_4$/$m^2$/hr at JonJu, and 482.4$\pm$1140 mgCH$_4$/$m^2$/hr at KunSan. These measurement data were used for the extrapolation of national methane emission rate based on 1997 national solid waste data. The results were compared to those derived by theoretical first decay model suggested by IPCC guidelines.

• 대한기계학회논문집B
• /
• 제28권10호
• /
• pp.1172-1177
• /
• 2004

The emission control of automobile has been intensified as a part of the countermeasure to decrease air pollution in the world. As the cars with an alternative fuel starts to get into the spotlight, the cars with low emission has been introduced and exhaust gas regulation forced in this country. These days, LPG vehicles, which infrastructure of fuel was already built up, and CNG vehicles are recognized for alternative fuel cars in this country. In this study, the constant volume combustion chamber was manufactured and used for experiments to obtain the combustion characteristics of propane mixture. The combustion characteristics was analyzed, with the change of supply conditions of propane fuel. Inside the combustion chamber, the maximum temperature increase with the initial pressure is going up. The burning velocity also seems to have the same characteristic as the temperature. However, the heat flux do not change much according to the theoretical correct mixture but it changes with the various initial temperature of the combustion chamber.

• 한국산학기술학회논문지
• /
• 제15권6호
• /
• pp.3403-3409
• /
• 2014

동축 와류형 분사기 19개로 구성된 연소기 헤드와 냉각채널을 갖는 연소실을 이용하여 연소시험을 수행하였다. 추진제로는 액체산소와 케로신(Jet A-1)이 사용되었으며, 연소시험은 연소실 압력 59~82 bar, 혼합비 2.0~3.0 영역에서 수행되었다. 냉각채널 연소실의 냉각 유체로는 물이 사용되었으며, 냉각채널 입구와 출구에서의 물의 온도를 측정하여 열유속 값을 계산하였다. 본 연구에서는 연소불안정에 따른 열전달 영향을 살펴보는 것을 목표로 하였으며, 이를 위해 냉각수의 온도 변화를 계측하였다. 몇 번의 연소시험에서 연소불안정 현상이 발생하였으며, 이때 열유속이 5~20% 정도 증가하는 결과가 나타났다. 또한 열유속은 연소불안정이 발생하는 초기 시점에서 최대가 되는 것을 알 수 있었다.

• 한국추진공학회지
• /
• 제10권4호
• /
• pp.85-92
• /
• 2006

액체로켓엔진의 막냉각 성능 예측을 위한 설계 프로그램을 개발하였다. 저혼합비 가스층이 가지는 열차단 효과를 CFD를 적용하여 해석하였다. CFD 해석 결과에 기반한 1차원 막냉각 모델을 기존의 재생냉각 프로그램에 적용하였다. 축소형 calorimetric 연소기와 실물형 연소실의 열유속 시험 데이터비교를 통하여, 비록 과다예측 특성을 보이기는 하지만 만족할만한 결과를 얻었다. 이로서 막냉각이 로켓엔진의 노즐목의 열하중 감소에 효과적임이 확인되었다.