• 한국해양공학회지
• /
• 제17권4호
• /
• pp.52-58
• /
• 2003

Underwater wet arc welds were experimentally performed on the KR-RA steel plate as base metal by using four different types of flux coated electrodes: KT33, UWEE, UWCS, and TN20, UWEE, the individually designed flux coated underwater electrode, had good operability when compared with other domestic terrestrial electrodes, and imported goods. The hardness value and the portion of martensite of HAZ were increased, by using a rapid cooling rate, Mechanical properties were also examined experimentally with a multi-pass butt-welding specimen test. The individually designed flux coated electrode UWEE could be used in practice for underwater wet welds.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제6권1호
• /
• pp.75-81
• /
• 2003

Underwater wet arc welds were experimentally performed on the KR-RA steel plate as base metal by using four different types of flux coated electrodes: KT33, UWEE, UWCS, and TN20. UWEE, the individually designed flux coated underwater electrode, had good operability when compared with other domestic terrestrial electrodes, and imported goods. The hardness value and the portion of martensite of HAZ were increased, by using a rapid cooling rate, Mechanical properties were also examined experimentally with a multi-pass butt-welding specimen test. The individually designed flux coated electrode UWEE could be used in practice for underwater wet welds.

• 생약학회지
• /
• 제49권2호
• /
• pp.165-171
• /
• 2018

Artemisiae Capillaris Herba is a dried aerial part of Asteraceae capillaris Thunb.(Compositae), which has been used in Korean traditional medicine for the treatment of various diseases. It has a variety of pharmacological activities and has been evaluated for potential as an active ingredient in cosmeceutical products. In the cosmetics industry, animal experiments is besides the major concern of ethics, there are few more disadvantages of animal experimentation like demand of skilled manpower, time consuming protocols and high cost. Therefore, various alternatives to animal experiments have been proposed. The purpose of this study was to investigate the skin permeation characteristics of chlorogenic acid and dimethyleculetin, which are constituent of Artemisiae Capillaris Herba by using Franz diffusion cell. As a result, skin permeability was characterized by flux(penetration rates) and $K_p$(permeability coefficient) value, chlorogenic acid had lower flux and $K_p$ than dimethylesculetin. According to the definitions of Marzulli, chlorogenic acid and dimethylesculetin would be classified as 'Moderate' and 'Very fast' respectively. In conclusion, skin permeation characteristics of chlorogenic acid and dimethylesculetin were confirmed through Franz diffusion cell, and suggests the direction of alternative method for skin permeation of natural compounds.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권4호
• /
• pp.36-39
• /
• 2022

Since the MgB₂ superconductor is simply composed of two constituents of Mg and B, its performance can be monitored easily with the change of one ingredient compared to the other. With the powder size of B less than 100 nm, two different sizes of Mg powders are used to investigate the reaction temperature dependence of MgB₂ bulk samples. In the range of 630-700℃ for the duration of 30 min., the un-reacted Mg is seen only at 630℃ with Mg powder size of <5 ㎛, whereas Mg traces are detected at all the temperature range with Mg powder size of <45 ㎛. The reaction temperature dependence of MgB₂ superconducting transition temperature, T_c, shows little difference whether Mg powder size is large or small in this range except for the 630℃. It is worthy of notice that the critical current densities of MgB₂ show higher performance with the small size of Mg compared to the large one at all field ranges. With the Mg powder size of <45 ㎛, flux pinning is enhanced with decreasing the reaction temperature, whereas flux pinning properties is quite similar in the Mg powder size of <5 ㎛ except for the 630℃, where Mg is left behind after the reaction.

• 마이크로전자및패키징학회지
• /
• 제22권1호
• /
• pp.69-74
• /
• 2015

첨단 전자기기에 사용되는 전자부품의 크기와 접속피치가 감소하면서 리플로우 공정 후 플럭스 잔사의 세정이 어려워짐에 따라 무세정 솔더 페이스트에 대한 요구가 증가하고 있다. 본 연구에서는 SAC305 솔더분말과 에폭시 레진을 주성분으로 하는 경화성 플럭스를 혼합하여 제조한 에폭시 경화형 솔더 페이스트에 대하여 리플로우 공정성, 플럭스 잔사의 부식성, 솔더볼 및 보드레벨 BGA 패키지 솔더 접합부의 기계적 거동을 기존 로진계 솔더 페이스트와 비교하여 평가하였다. 에폭시 경화형 솔더 페이스트는 솔더 접합부 주변에 경화물 필렛을 형성한 것으로 보아 플럭싱 작용에 의해 솔더 접합부가 형성된 이후에 경화반응이 진행되는 것을 확인할 수 있었으며, 동판에 대한 젖음성 시험을 통해 기존상용 솔더 페이스트 정도의 납퍼짐성을 갖는 것을 알 수 있었다. 리플로우 후 동판에 대한 고온 고습 시험을 통해 에폭시 경화형 솔더 페이스트는 동판 부식을 전혀 발생시키지 않는 것으로 나타났는데, 이는 FT-IR 분석결과 에폭시 경화반응을 통해 단단히 고정된 결과로 생각되었다. 볼전단, 볼당김 및 다이전단 시험 결과, 솔더 접합부 주변에 형성된 경화물 필렛은 솔더 표면과 접착본딩을 형성하며, 다이전단강도를 15~40% 정도 향상시키는 것으로 보아 에폭시 경화형 솔더 페이스트는 플럭스 잔사 세정공정의 생략과 함께 솔더 접합부 보강효과를 통해 패키지 신뢰성 향상에도 기여할 수 있을 것으로 생각되었다.

• 천문학회지
• /
• 제37권5호
• /
• pp.517-525
• /
• 2004

We present an update on our proposal that during the 'quasar era' (1.5 $\le$ z $\le$ 3), powerful radio galaxies could have played a major role in the enhanced global star-formation, and in the widespread magnetization and metal pollution of the universe. A key ingredient of this proposal is our estimate that the true cosmological evolution of the radio galaxy population is likely to be even steeper than what has been inferred from flux-limited samples of radio sources with redshift data, when an allowance is made for the inverse Compton losses on the cosmic microwave background which were much greater at higher redshifts. We thus estimate that a large fraction of the clumps of proto-galactic material within the cosmic web of filaments was probably impacted by the expanding lobes of radio galaxies during the quasar era. Some recently published observational evidence and simulations which provide support for this picture are pointed out. We also show that the inverse Compton x-ray emission from the population of radio galaxies during the quasar era, which we inferred to be largely missing from the derived radio luminosity function, is still only a small fraction of the observed soft x-ray background (XRB) and hence the limit imposed on this scenario by the XRB is not violated.

• 동력기계공학회지
• /
• 제10권4호
• /
• pp.25-30
• /
• 2006

This paper represents the numerical analysis in unsteady state on the variation of diameter and environmental velocity of carbon heating source. In general heating system, the oil and sheath heater is widely used, but these systems have many problems. So, the heating source with carbon ingredient has been researched in many country about manufacture, thermal and electrical properties. In this research, the carbon heating source was studied through numerical analysis on several conditions of unsteady state, heat generation, diameter and environmental velocity. The temperature distributions at steady state are appeared as a non-proportional linear pattern with variations of environmental velocity due to the Nesselt number with convective heat flux is proportioned to 0.805 of Reynolds number. As the radius is increasing, the temperature distributions is appeared the minus tilt because of the environmental condition is cooling by constant temperature. So, the correlation equation between temperature at steady state and environmental velocity was obtained.

• 보존과학회지
• /
• 제34권5호
• /
• pp.345-358
• /
• 2018

부산 녹산동 가마터에서 출토된 12세기 조질청자를 중심으로 가마터 4기에서 출토된 35점을 분석 시료로 선정하고 색도, 비중 및 흡수율, 미세구조 관찰과 태토와 유약의 조성을 분석하였다. 청자의 태토 색도는 가마에 상관없이 모두 비슷했으며 4 5호 가마 출토 선정 도편은 2 3호보다 명도가 어둡고, 채도는 회색계와 갈색계로 구분된다. 유약은 적색과 황색의 기여도가 높은 편이다. 선정된 도편의 기공률은 회색계 8.8%이고 갈색계 16.1%로 태토 색상에 따라 차이를 보인다. 태토와 유약의 주성분은 청자의 전형적인 성분 범주에 속하지만 $TiO_2$의 함량이 차이가 있다. 2 3호 가마와 4 5호 가마 청자의 가시적 차이는 사용 원료보다 수비 및 번조공정에 따른 것으로 볼 수 있으며 $Fe_2O_3$와 $K_2O$의 함량 차이는 공정 과정에서 배합기술의 변화를 시도한 결과로 볼 수 있다. 결론적으로 녹산동 청자는 초벌과정 없이 태토에 유약을 바른 후 한 번에 구웠던 제작 공정으로 인하여 태토가 충분히 자화되지 못했으므로 양질의 청자를 제작하기 위하여 가마별로 공정 차이가 있었을 가능성이 높다고 생각된다.

• Journal of Pharmaceutical Investigation
• /
• 제28권2호
• /
• pp.87-92
• /
• 1998

Kojic acid (KA) is an antimelanogenic agent which has been widely used in cosmetics to whiten the skin color. However, it has the drawbacks of the skin irritancy and the instability against the pH, temperature, and light. In order to overcome these problems, various topical gels and multiple emulsion creams which can control the release of active ingredient, KA, were formulated employing cream bases of mineral oil with caprylic capric triglyceride and hydrophilic polymers such as chitosan, carbopol. and pluronics. Using Franz diffusion cells mounted with a synthetic cellulose membrane (MWCO 12,000), drug release characteristics of the formulations were evaluated by the HPLC assay of KA concentration in the receptor compartment of pH 7.4 phosphate buffered saline solution. Drug release from chitosan-based gels (ChitoGel) obeyed to the first order kinetics with a rapid release especially in the initial period. However, pluronic-based gels (PluGel) and carbopol-based gels (CarboGel) revealed controlled release of drug to some extent, followed by the square root-time kinetics. Moreover, the release of KA was further controlled with the W/O/W multiple emulsion creams (MultiCream), showing the apparent zero order release kinetics by virtue of dynamic ratecontrolling membrane of the oil layer. The flux $(J,\;{\mu}g/cm^2/hr)$ of ChitoGel. CarboGel. PluGel. and MultiCream in the initial period of 6hr were 73.30, 28.67. 24.04 and 7.72, respectively. On the other hand, the skin irritancy score of ChitoGel and MultiCream were observed as 2.5 and 2.3 respectively, in the rabbit skin irritation test. Although there were insignificant differences at p<0.05 between those formulations, it was possible to conclude that the W/O/W multiple emulsion creams containing KA might be a good candidate for an antimelanogenic drug delivery system due to the controlled release of acidic drug molecules.

• Journal of Korean Academy of Oral Health
• /
• 제42권4호
• /
• pp.224-228
• /
• 2018

Objectives: As a first step to study the anticaries effect of ethanol alone, we investigated the effects of ethanol on the expression levels of the atpB gene and proton permeability of Streptococcus mutans in suspension cultures. Methods: S. mutans UA159 was grown in brain heart infusion medium at either pH 4.8 or 6.8. The total extracted RNA was reverse-transcribed into cDNA using a $Superscript^{TM}$ First-Strand Synthesis System. The resulting cDNA and negative controls were amplified by ABI PRISM 7700 real-time PCR system with SYBR Green PCR Master Mix. For proton flux assay, bacterial suspensions were titrated to pH 4.6 with 0.5 M HCl, and then additional 0.5 M HCl was added to decrease the pH values by approximately 0.4 units. The subsequent increase in pH was monitored using a glass electrode. Ten percent (v/v) butanol was added to the suspensions at 80 min to disrupt the cell membrane. Results: In a concentration-dependent manner, ethanol alone not only decreased the growth rate of S. mutans and the expression of the atpB gene but also increased the proton permeability at both pH 4.8 and 6.8. Conclusions: These findings suggest that ethanol has the potential for an anticaries ingredient. We believe that ethanol may be used together with fluoride and/or other cariostatic agents in order to develop better anticaries toothpastes and/or mouthrinses.