• The Korean Journal of Nuclear Medicine
• /
• v.14 no.1
• /
• pp.1-8
• /
• 1980

Serum TSH levels were measured by radioimmunoassay before and after intravenous administration of synthetic thyrotropin-releasing hormone (TRH) to 15 normal subjects and 55 patients with primary thyroid disease (14 patients with euthyroidism, 24 patients with thyrotoxicosis and 17 patients with hypothyroidism) to evaluate pituitary TSH reserve and its diagnostic availability. The observed results were as follows. 1. In normal subjects, serum TSH responses to synthetic TRH were $3.2{\pm}1.0$ at 0min (baseline TSH level), $8.0{\pm}4.0$ at 10min, $11.7{\pm}5.0$ at 20min, $13.7{\pm}7.1$ at 30min, $9.7{\pm}5.0$ at 60min., $5.2{\pm}2.0$ at 120min. and $3.6{\pm}0.4{\mu}U/ml$ at 180 min. Serum TSH peaked at $20{\sim}30$ minutes and returned nearly to baseline at 180minutes. 2. In euthyroid group, serum TSH responses to synthetic TRH were $3.3{\pm}1.6$ at 0min, $8.6{\pm}8.0$ at 10min, $10.9{\pm}8.5$ at 20min, $12.5{\pm}8.4$ at 30min, $9.0{\pm}5.9$ at 60min, $5.6{\pm}2.6$ at 120min and $3.5{\pm}1.3{\mu}U/ml$ at 180min. No significant difference revealed between euthyroid group and normal subjects (p>0.05). 3. In hyperthyroid group, serum TSH responses to synthetic TRH were $1.5{\pm}0.6$ at 0min, $2.2{\pm}0.8$ at 10min., $2.3{\pm}1.0$ at 20min., $2.4{\pm}1.5$ at 30min., $2.1{\pm}1.1$ at 60min., $1.9{\pm}0.2$ at 120min. and $1.5{\pm}0.8{\mu}U/ml$ at 180min., No response to TRH showed. 4. In hypothyroid group, mean values of serum TSH response to synthetic TRH were 42.0 at 0min., 60.6 at 10min., 124.8 at 20min., 123.0 at 30min., 101.6 at 60min., 64.3 at 120min. and $15.5{\mu}U/ml$ at 180 min., Patients with primary hypothyroidism showed an exaggerated TSH response to synthetic TRH despite their high basal TSH. 5. Side effects attending synthetic TRH administration were transient nausea (59.0%), desire to micturate (59.0%), feeling of flushing(19.7%), dizziness (45.9%), metallic taste (9.8%) and headache (19.7%). Any side effect didn't show in 16.4%. These symptoms began almost immediately after TRH intravenous injection and lasted several minutes, and not related to dose or response in the person experiencing it.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.47-47
• /
• 2011

하도 내 수역이 식생으로의 천이가 진행되고 최종적으로는 육상 식물들이 활착하게 되는 육역화 현상은 하도의 수리학적 문제 및 환경생태적 측면에서 큰 문제를 발생시킬 가능성을 내포하고 있다. 최근 하천복원의 필요성이 강조됨에 따라 물골공법 및 국부세굴 유도형 공법 등 실용성을 포함시킨 다양한 하천 복원공법이 제시되고 있다. 물골공법은 자연적인 물골형상에 의한 유사퇴적방지, 홍수시 유속저감 및 생물서식처를 조성하는 하상 생태복원 공법을 의미하며, 본 연구에서는 수리모형실험 및 3차원 수치모의를 이용하여 다양한 하도육역화 방지 공법 중 물골공법의 효과 및 적용성을 검토하였다. 물골공법의 특성 중 유사퇴적방지의 효율성 분석을 위해 부정류(unsteady state)상태에 대해 연구를 수행하였으며 홍수 이후 수위하강시 고수부지 및 물골 주변에서의 흐름특성을 재현하였다. 수위하강 모의를 위해 임의의 수위하강시간을 선정하여, 수위하강이 진행되는 시간( )을 각각의 수위하강시간으로 무차원 화한 후 무차원된 시간(t/�� )에 따른 흐름특성을 비교 분석하였으며 모의 및 분석결과, 수위하강시간이 80초 이상일 경우 주요 지점에서의 유속의 변화는 무차원된 시간에 대하여 일치하였으며 수리모형실험 및 수치모의에 적용할 수위하강시간으로 선정할 수 있었다. 물골 전구간에 대한 부정류 실험을 위해 LSPIV(Large-Scale Particle Image Velocimetry)장치를 이용하여 수위하강에 따른 물골주변의 흐름특성을 관측하였으며 3차원 수치모의를 통해 검증하였다. 실험 분석결과, 수위하강에 따라 고수부지 위로 흐르는 유수가 물골 내부로 유입되어 물골을 따라 흘러 물골 합류부로 이동하는 것으로 나타났으며, 이는 홍수시 유수와 함께 떠다니는 부유사(suspended load)가 물골로 유입되어 물골 합류부로 이동하므로 물골의 유사배제 가능성을 판단할 수 있었다. 또한 물골의 유사배제능력을 평가를 위해 실험을 통하여 산정된 최대 및 최소 마찰속도(U )와 유사이동 한계곡선을 이용하여 물골의 통한 배제 가능한 유사의 입경을 분석하였다. 분석결과, 최소 2mm에서 최대 4mm로 나타났으며 이 입경 이하인 유사에 대해서는 퇴적되지 않고 물골을 통하여 배제될 수 있을 것으로 예상되었다. 본 연구 결과 물골공법 적용시 수위하강에 따라 물골에서 하도방향으로 유사의 수세(flushing)효과가 나타났으며 유사의 부상 및 이송이 효과적으로 발생하여 고수부지 내 유사퇴적 방지가 효과적인 것으로 판단되었다. 추후 다양한 형상의 물골에 대한 능력검토가 보완된다면 물골설계지침 제안을 위한 자료로 활용 가능할 것이다.

• Journal of Wetlands Research
• /
• v.22 no.2
• /
• pp.161-170
• /
• 2020

Constructed wetlands (CWs) are widely used to solve water quality problems caused by diffuse pollution from agricultural areas; however, phytoplankton blooms in CW systems can occur due to long hydraulic retention time (HRT), high nutrient loading, and exposure to sunlight. This study was conducted to evaluate the efficiency of a CW designed to treat agricultural diffuse pollution and develop a design concept to improve the nature-based capabilities of the system. Monitoring was conducted to assess contribution of individual wetland components (i.e. water, sediments, and plants) in the treatment performance of the system. During dry days, the turbidity and particulates concentration in the CW increased by 80 to 197% and 10 to 87%, respectively, due to the excessive growth of phytoplankton. On storm events, the concentration of particulates, organics, and nutrients were reduced by 43% to 70%, 22% to 49%, and 15% to 69% due to adequate water circulation and constant flushing of pollutants in the system. Based on the results, adequate water circulation is necessary to improve the performance of the CW. Free water surface CWs are usually designed to have a constant water level; however, the climate in South Korea is characterized by distinct dry and rainy seasons, which may not be suitable for this conventional design. This study presented a concept of multifunctional design in order to solve current CW design problems and improve the flood control, water quality management, and environmental functions of the facility.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.6
• /
• pp.476-487
• /
• 2009

The virtual memory system in 4.4 BSD operating systems exploits a clustering scheme to reduce disk I/Os in paging out (or flushing) modified pages that are intended to be replaced in order to make free rooms in memory. Upon the page out of a victim page, the scheme stores a cluster (or group) of modified pages contiguous with the victim in the virtual address space to swap disk at a single disk write. However, it fails to find large clusters of contiguous pages if applications change pages not adjacent with each other in the virtual address space. To address the problem, we propose a new clustering scheme called Multiple-Object Clustering (MOC), which together stores multiple clusters in the virtual address space at a single disk write instead of paging out the clusters to swap space at separate disk I/Os. This multiple-cluster transfer allows the virtual memory system to significantly decrease disk writes, thus improving the page-out performance. Our experiments in the FreeBSD 6.2 show that MOC improves the execution times of realistic benchmarks such as NS2, Scimark2 SOR, and nbench LU over the traditional clustering scheme ranging from 9 to 45%.

• Economic and Environmental Geology
• /
• v.42 no.3
• /
• pp.207-216
• /
• 2009

In this study, water quality variation in borehole groundwaters and surface leachate waters were investigated on a seasonal sampling and remote monitoring basis within the waste impoundments at the Geopung mine site where previous rehabilitation measures were unsuccessful to prevent acidic drainage. All groundwaters were typical acidic drainage with acidic pH (3.3${\sim}$4.6) and high TDS (338${\sim}$3330 mg/L) values during the dry season, but increases in metal contents (TDS 414${\sim}$4890 mg/L) and decrease of pH (2.7${\sim}$3.6) were observed during the rainy season. Surface leachate waters showed a similar pattern in water quality variation. Surface runoff waters during rain events had acidic pH (3.0${\sim}$3.4) through direct reactions with waste rocks. Good correlations were found between major and trace elements measured in water samples, but no significant seasonal variation in chemical compositions was shown except relative changes in contents. It can be suggested that dissolution of soluble secondary salts caused by flushing of weathered waste rocks and tailings directly influenced the water quality within the waste impoundments. Increases in acid and metal concentrations and their loadings from mine wastes are anticipated in the rainy season. More appropriate cover systems on waste rocks and tailings necessitate consideration of more extreme conditions in the study mine.

• The Korean Journal of Nuclear Medicine
• /
• v.32 no.3
• /
• pp.250-258
• /
• 1998

Purpose: ATP (adenosine triphosphate) is a potent coronary vasodilator with a rapid onset of action and a very short half-life. Myocardial perfusion scintigraphy with intravenous ATP has not yet been sufficiently proven in the diagnosis, follow-up, and risk stratification of coronary artery disease. The purpose of this study was to evaluate the safety, feasibility and diagnostic accuracy of pharmacologic stress thallium-201 myocardial SPECT using an intra-venous ATP infusion in patients with suspected coronary artery disease. Materials and Methods: Thallium-201 myocardial SPECT in 319 patients with suspected coronary artery disease were performed after the infusion of ATP (0.08 mg/kg/min for 6 min). The adverse effects were carefully monitored. Coronary angiography was also performed within 3 weeks. Results: Although 76.5% of the patients had some adverse effects, they were transient, mild, and well tolerated. In all patients, the ATP infusion protocol was completed and only 2 patients required aminophylline. The adverse effects were dyspnea in 63%, headache in 31%, flushing in 21%, chest pain in 14% and abdominal discomfort in 5% of the patients. The sensitivity and specificity were 80% and 90% respectively. Conclusion: Thallium-201 myocardial SPECT after 6 min-infusion of ATP at a rate of 0.08 mg/kg/min is safe and has a diagnostic value in detecting coronary artery disease.

• Journal of Animal Environmental Science
• /
• v.17 no.3
• /
• pp.181-188
• /
• 2011

With an increasing livestock population, animal manure production has been steadily increasing in Korea. This trend has forced farmers to spend more money for animal manure treatment in their farm. Therefore, research utilizing animal manure as a renewable resources has become increasingly important. The purpose of this study was to develop a stable advanced wastewater treatment system can be applied to conventional animal wastewater treatment processes and evaluate its contribution to reduce effluent discharge volume by recycling as flushing water. AOP (advanced oxidation process) process improved wastewater treatment efficiency in terms of color, suspended solids (SS) and chemical oxygen demand (COD). Due to the addition of Hydrogen peroxide ($H_2O_2$), pathogens, Salmonella and E. coli, reduction was accomplished. To enhance ozone treatment effect, three levels of ozone test on secondary effluent of pig slurry purification system were conducted. At the level of 5 g/hr, 6.7 g/hr and 8.4 g/hr color of secondary effluent of pig slurry purification system were decreased from 2,433 to 2,199, 2,433 to 1,980 and 2,433 to 243, respectively.

• Journal of Embryo Transfer
• /
• v.28 no.1
• /
• pp.7-12
• /
• 2013

Body condition score (BCS) is a useful management tool for distinguishing differences in nutritional needs of cows in the herd. Although it is not always possible to quantify the nutrient content of the feed supplied to the donor cow, the nutritional status can be determined by the BCS. The objective of this study was to evaluate in vivo embryo production, return to estrous of donor and pregnancy rate of recipients following BCS in Hanwoo superovulation. Sixty nine Hanwoo donor cows were flushed on day 7 of estrus cycle with same FSH and artificial insemination by the same technicians. Embryos were recovered on 7 days after the third insemination by flushing the uterus with Embryo Collection Medium. The results obtained were as follows: No differences were observed in the efficiency of superovulation rates regardless of BCS ($${\leq_-}2.0$$, 2.5 to 3.0, and $${\geq_-}3.5$$). The mean number of total embryos was each $5.20{\pm}0.86$, $11.56{\pm}1.04$, and $6.23{\pm}1.07$. The mean number of transferable embryo from $${\leq_-}2.0$$, 2.5 to 3.0, and $${\geq_-}3.5$$ of BCS was $2.60{\pm}0.87$, $7.94{\pm}0.89$, and $4.75{\pm}1.32$, respectively (p<0.05). Return to estrous regardless of donor BCS was no difference. The pregnancy rates of recipient were BCS $${\leq_-}2.0$$ 11.76%, 2.5 to 3.0 40.79%, and $${\geq_-}3.5$$ 11.11%, following transfer of fresh embryos produced in vivo, respectively. These results indicate that if the Hanwoo with BCS 2.5 to 3.3 are used for donor and recipient, the embryo production and the conception rate will be greater.

• The Korean Journal of Nuclear Medicine
• /
• v.27 no.1
• /
• pp.59-64
• /
• 1993

To evaluate the usefulness and differences in diagnosing coronary artery disease (CAD) between men and women of intravenous dipyridamole $^{99m}Tc$-MIBI myocardial SPECT, we obtained $^{99m}Tc$-MIBI myocardial SPECT and compared with the findings of coronary angiographies. Ninety eight male and 37 female patients who underwent dipyridamole $^{99m}Tc$-MIBI myocardial imaging within one month of cardiac catheterization were studied. Scans were considered abnormal if perfusion defect was detected and the defect size was more than 12% for left anterior descending artery (LAD) and circumflex (LCX) and 8% for right coronary artery (RCA) territories. Lesions${\geqq}$50% luminal diameter narrowing were considered significant CAD. Overall sensitivity for detection of CAD was 94.3% in men and 96.4% in women; specificity was 70% in men and 52.6% in women (P=not significant, ns). Vessel-matched sensitivity was 75.3% in men and 72.7% in women (P=ns): specificity was 84.6% in men and 67.9% in women (P < 0.025). For individual coronary artery, the sensitivity in men and women was 87.7%, 81.8% for LAD; 78%, 83.3% for RCA and 52.2%, 46.7% for LCX (P=ns): the specificity was 80%, 40% for LAD (P<0.01), 82.5%, 68.4% for RCA, 88.9%, 86.4% for LCX (P=ns). The hemodynamic parameter after intravenous dipyridamole in men and women were significantly changed; the heart rate was increased and systolic, diastolic blood pressure was decreased. Adverse effects were reported in 58.8% of men and 72.7% in women (P=ns). The incidence of chest pain and headache were higher in women. There was no significant difference in the incidences of nausea, abdominal pain, dizziness, facial flushing, dyspnea. In conclusion, dipyridamole $^{99m}Tc$-MIBI myocardial SPECT is a safe, noninvasive test for evaluation of CAD. There was no gender difference to detect CAD, but more false-positive rate in women especially in the territory of LAD.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.204-205
• /
• 2011

In thin film silicon solar cells, p-i-n structure is adopted instead of p/n junction structure as in wafer-based Si solar cells. PECVD is a most widely used thin film deposition process for a-Si:H or ${\mu}c$-Si:H solar cells. For best performance of thin film silicon solar cell, the dopant profiles at p/i and i/n interfaces need to be as sharp as possible. The sharpness of dopant profiles can easily achieved when using multi-chamber PECVD equipment, in which each layer is deposited in separate chamber. However, in a single-chamber PECVD system, doped and intrinsic layers are deposited in one plasma chamber, which inevitably impedes sharp dopant profiles at the interfaces due to the contamination from previous deposition process. The cross-contamination between layers is a serious drawback of a single-chamber PECVD system in spite of the advantage of lower initial investment cost for the equipment. In order to resolve the cross-contamination problem in single-chamber PECVD systems, flushing method of the chamber with NH3 gas or water vapor after doped layer deposition process has been used. In this study, a new plasma process to solve the cross-contamination problem in a single-chamber PECVD system was suggested. A single-chamber VHF-PECVD system was used for superstrate type p-i-n a-Si:H solar cell manufacturing on Asahi-type U FTO glass. A 80 MHz and 20 watts of pulsed RF power was applied to the parallel plate RF cathode at the frequency of 10 kHz and 80% duty ratio. A mixture gas of Ar, H2 and SiH4 was used for i-layer deposition and the deposition pressure was 0.4 Torr. For p and n layer deposition, B2H6 and PH3 was used as doping gas, respectively. The deposition temperature was $250^{\circ}C$ and the total p-i-n layer thickness was about $3500{\AA}$. In order to remove the deposited B inside of the vacuum chamber during p-layer deposition, a high pulsed RF power of about 80 W was applied right after p-layer deposition without SiH4 gas, which is followed by i-layer and n-layer deposition. Finally, Ag was deposited as top electrode. The best initial solar cell efficiency of 9.5 % for test cell area of 0.2 $cm^2$ could be achieved by applying the in-situ plasma cleaning method. The dependence on RF power and treatment time was investigated along with the SIMS analysis of the p-i interface for boron profiles.