• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.07a
• /
• pp.39-42
• /
• 1999

Perfluoropolymers represent the ultimate resistance to hostile chemical environments and high service temperature, attributed to the presence of fluorine in the polymer backbone, i.e. to the high bond energy of C-F and C-C bonds of fluorocarbons. Copolymers of Tetrafluoroethylene (TEE) and 2, 2, 4Trifluoro-5Trifluorometoxy- 1, 3Dioxole (TTD), commercially known as HYFLON AD, are amorphous perfluoropolymers with glass transition temperature (Tg)higher than room temperature, showing a thermal decomposition temperature exceeding 40$0^{\circ}C$. These polymer systems are highly soluble in fluorinated solvents, with low solution viscosities. This property allows the preparation of self-supported and composite membranes with desired membrane thickness. Symmetric and asymmetric perfluoropolymer membranes, made with HYFLON AD, have been prepared and evaluated. Porous and not porous symmetric membranes have been obtained by solvent evaporation with various processing conditions. Asymmetric membranes have been prepared by th wet phase inversion method. Measure of contact angle to distilled water have been carried out. Figure 1 compares experimental results with those of other commercial membranes. Contact angles of about 120$^{\circ}$for our amorphous perfluoropolymer membranes demonstrate that they posses a high hydrophobic character. Measure of contact angles to hexandecane have been also carried out to evaluate the organophobic character. Rsults are reported in Figure 2. The observed strong organophobicity leads to excellent fouling resistance and inertness. Porous membranes with pore size between 30 and 80 nanometers have shown no permeation to water at pressures as high as 10 bars. However high permeation to gases, such as O2, N2 and CO2, and no selectivities were observed. Considering the porous structure of the membrane, this behavior was expected. In consideration of the above properties, possible useful uses in th field of gas- liquid separations are envisaged for these membranes. A particularly promising application is in the field of membrane contactors, equipments in which membranes are used to improve mass transfer coefficients in respect to traditional extraction and absorption processes. Gas permeation properties have been evaluated for asymmetric membranes and composite symmetric ones. Experimental permselectivity values, obtained at different pressure differences, to various single gases are reported in Tab. 1, 2 and 3. Experimental data have been compared with literature data obtained with membranes made with different amorphous perfluoropolymer systems, such as copolymers of Perfluoro2, 2dimethyl dioxole (PDD) and Tetrafluorethylene, commercialized by the Du Pont Company with the trade name of Teflon AF. An interesting linear relationship between permeability and the glass transition temperature of the polymer constituting the membrane has been observed. Results are descussed in terms of polymer chain structure, which affects the presence of voids at molecular scale and their size distribution. Molecular Dyanmics studies are in progress in order to support the understanding of these results. A modified Theodoru- Suter method provided by the Amorphous Cell module of InsightII/Discover was used to determine the chain packing. A completely amorphous polymer box of about 3.5 nm was considered. Last but not least the use of amorphous perfluoropolymer membranes appears to be ideal when separation processes have to be performed in hostile environments, i.e. high temperatures and aggressive non-aqueous media, such as chemicals and solvents. In these cases Hyflon AD membranes can exploit the outstanding resistance of perfluoropolymers.

• Korean journal of food and cookery science
• /
• v.20 no.1
• /
• pp.1-10
• /
• 2004

This study was executed to find the effects of dietary control and oral health care on dental caries and oral problems in elementary school students, including the effects of nutritional and oral health education on the prevention of dental caries. 1. The oral health study found that 88.9％ of students brushed their teeth everyday, 63.7％ 2 times a day, and 50.4％ in the morning and at night. 2. According to the general characteristics whether or not, the female students had more dental caries than the males, and 29.1％ of the students that had dental caries ate snacke 1 or 2 times a day. 3. After the nutritional education, more students brushed their teeth in the after meal 4. According to gender, grade and nutritional education for oral health care, male students and higher grade students were more aware that “brushing teeth after meals is better than before”. The male and higher grade students, after the nutritional education, were more aware that “Bones and teeth are made from calcium”, and “Fluorine prevents teeth from dental caries” and the differences between the genders were statistically significant in relation to both these facts (p〈0.05) and before and after education (p〈0.01). The male and higher grade students, and those nutritionally educated were more conscious that “vegetables and fruits are good for teeth”, with the differences before and after the nutritional education were statistically significant (p〈0.05). The male and higher grade students were well aware that “Foods that have sugar cause dental caries”, and significant differences were shown between grades (p〈0.05). The male and higher grade students, after the nutritional education and were well aware that “Milk is good for teeth”, with a significant gender difference (p〈0.05). The female and higher grade students, and those after nutritional education were well aware that “Dental caries can not be perfectly cured once it had already occurred”. after nutrition, but not much differences.

• Journal of Climate Change Research
• /
• v.3 no.2
• /
• pp.117-128
• /
• 2012

The Government of South Korea has continued its effort to fixate virtuous circle of economic growth and climate change response to cope with international demands and pressure to commitment for greenhouse gas reduction effectively. Nationally, Korean Government has established "Enforcement of the Framework Act on Low carbon, Green Growth"(2010. 4. 13) to implement national mid-term GHG mitigation goal(30% reduction by 2020 compare to BAU), which established the foundation for phased GHG mitigation by setting up the sectoral and industrial goal, adopting GHG and Energy Target Management System. Also, follow-up measures are taken such as planning and control of mid-term and short-term mitigation target by detailed analysis of potential mitigation of sector and industry, building up the infrastructure for periodic and systematic analysis of target management. Likewise, it is required to establish more accurate, reliable and detailed sectoral GHG inventory for successfully establishment and implement the frame act. In comparison to the $CO_2$ emission, Especially fluorinated greenhouse gases (HFCs, PFCs, $SF_6$) are lacking research to build the greenhouse gas inventories to identify emissions sources and collection of the applicable collection activities data. In this study, with the refrigeration and air conditioning sector being used to fluorine refrigerant(HFCs) as the center, greenhouse gas emission estimation methodology for evaluating the feasibility of using this methodology look over and mobile air conditioning, fixed air conditioning, household refrigeration equipment, commercial refrigeration equipment for the greenhouse gas emissions were calculated. First look at in terms of methodology, refrigeration and air conditioning sector GHG emissions in developing country-specific emission factors and activity data of the industrial sector the construction of the DB is not enough, it's 2006 IPCC Guidelines Tier 2a (emission factor approach) rather than the Tier 2b (mass balance approach) deems appropriate, and each detail by process, sectoral activity data more accurate, if DB is built Tier 2a (emission factor approach) can be applied will also be judged. Refrigeration and air conditioning sector in 2009 due to the use of refrigerant greenhouse gas emissions ($CO_2eq.$) assessment results, portable air conditioner 1,974,646 ton to year, fixed-mount air conditioner 1,011,754 ton to year, household refrigeration unit 4,396 ton to year, commercial refrigeration equipment 1,263 ton to year was estimated to total 2,992,037 tons.

• Nuclear Medicine and Molecular Imaging
• /
• v.40 no.5
• /
• pp.263-270
• /
• 2006

Purpose: Several radioisotope-labeled thymidine derivatives such as $[^{11}C]$thymidine was developed to demonstrate cell proliferation in tumor. But it is difficult to track metabolism with $[^{11}C]$thymidine due to rapid in vivo degradation and its short physical half-life. 3'-$[^{18}F]$fluoro-3'-deoxythymidine ($[^{18}F]$FLT) was reported to have the longer half life of fluorine-18 and the lack of metabolic degradation in vivo. Here, we described the synthesis of the 3'-$[^{18}F]$fluoro-3'-deoxythymidine ($[^{18}F]$FLT) and compared with $([^{18}F]FET)\;and\;([^{18}F]FDG)$ in cultured 9L cell and obtained the biodistribution and PET image in 9L tumor hearing rats. Material and Methods: For the synthesis of $[^{18}F]$FLT, 3-N-tert-butoxycarbonyl-(5'-O-(4,4'-dimet hoxytriphenylmethyl)-2'-deoxy-3'-O-(4-nitrobenzenesulfonyl)-${\beta}$-D-threopentofuranosyl)thymine was used as a FLT precursor, on which the tert-butyloxycarbonyl group was introduced to protect N3-position and nitrobenzenesulfonyl group. Radiolabeling of nosyl substitued precursor with $^{18}F$ was performed in acetonitrile at $120^{\circ}C$ and deproteced with 0.5 N HCI. The cell uptake was measured in cultured 9L glioma cell. The biodistribution was evaluated in 9L tumor bearing rats after intravenous injection at 10 min, 30 min, 60 min and 120 min and obtained PET image 60 minutes after injection. Results: The radiochemical yield was about 20-30% and radiochemical purity was more than 95% after HPLC purification. Cellular uptake of $[^{18}F]$FLT was increased as time elapsed. At 120 min post-injection, the ratios of tumor/blood, tumor/muscle and tumor/brain were $1.61{\pm}0.34,\;1.70{\pm}0.30\;and\;9.33{\pm}2.22$, respectively. The 9L tumor was well visualized at 60 min post injection in PET image. Conclusion: The uptake of $[^{18}F]$FLT in tumor was higher than in normal brain and PET image of $[^{18}F]$FLT was acceptable. These results suggest the possibility of $[^{18}F]$FLT at an imaging agent for brain tumor.

• Economic and Environmental Geology
• /
• v.12 no.3
• /
• pp.147-176
• /
• 1979

The Yeonhwa II zinc-lead mine is characterized by a dozen of moderately dipping tabular orebodies of skarn and zinc-lead sulfides, developed in accordance with the ENE-trending bedding thrusts and bedding planes of the Pungchon Limestone and underlying Myobong Formation, mostly along the contacts of a ENE-trending sill and a NW-trending dike of quartz mononite porphyry. The orebodies occur in three groups: (1) the footwall Wolgok orebodies with respect to the sill, (2) the hangingwall Wolgok orebodies, and (3) the Seongok orebodies extended from dike contacts into carbonate beds. Mineral compositions of these orebodies are dominated by calc-silicates (skarn) associated with ore minerals of sphalerite, galena, and chalcopyrite, as well as sulfide gangue of pyrrhotite. A pair of exo- and endo-skerns in the Wolgok footwall contact aureole between the Pungchon Limestone and quartz monzonite porphyry on the -120 level represents a well-developed symmetrical pattern of mineral zoning: a garnet/quartz zone in the center of exoskarn, two zones of pyroxene with ore minerals on both sides of the garnet/quartz zone, further outwards-an epidote/chlorite-bearing hornfelsic zone in the Myobong slate beyond a zone of unaffected limestone, and an epidote-dominated zone of endo skarn on the opposite side toward fresh quartz monzonite porphyry. These features indicate a combination of two effects on the skarn formation: (1) differences in composition of the host rocks(sedimentary and ignous), and (2) progressive outward migration of inner zones on outer zones on the course of metasomatic replacement of the pre-existing minerals. Microprobe analyses of garnet, pyroxene, pyroxenoids, epidote, and chlorite for nine major elements on a total of 23 mineral grains revealed that: the pyroxenes are hedenbergitic, in most zones, with a gradual decrease of Fe- and Mn-contents toward the central zone, whereas the garnets are andraditic in outer zones, but are grossularitic in the central zone. This indicates a reverse relationship of Fe-contents between pyroxene and garnet across the exoskarn zones. Pyroxenoids are lacking in wollastonite but are dominated by pyroxmangite, rhodonite and bustamite, indicating a Mn-rich nature in bulk chemistry. Pseudomorphic fluorite after garnet occurs abundantly reflecting a fluorine-enhanced evidence of the skarn-forming fluids. Epidote contains 0.19-0.25mole fraction of pistacite, and chlorite is Mn-rich but is Mg-poor. Sulfide mineralization took place with the most Fe-rich pyroxene rather than with garnet as indicated by the fact that the highest value of hedenbergite mole fraction occurs in the ore-bearing pyroxene zone. The Yeonhwa II ores are characterized by high zinc and low lead in metal grade, with minor quantity of copper content in almost constant grade. The hangingwall Wolgok and Seongok orebodies, that formed in a more open environment with respect to their local configurations of geologic setting, are more variable in metal grades and ratios, than are the footwall Wolgok orebodies formed in a more closed condition in a narrow interval of sedimentary beds.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.9 no.1
• /
• pp.51-58
• /
• 1980

Sixteen species of algae (4 species of green algae, 5 species of brown algae and 7 species of red algae) were collected from the coast of Chungmu, Gyeongnam, from June to October, 1976. The content of minerals in algae were analyzed by Atometic Absorption Spectrophotometer. The results were as followed 1) The content of Iron and Nickel in green algae were abundant, and those of Lead, Nickel and Manganese in brown algae were low. 2) The content of Cadmium were in the range of 0.58-1.04ppm (average: 0.85ppm) in green algae, 0.32-2.10ppm (average: 1.08ppm) in brown algae and 0.54-1.70ppm (average: 1.04ppm) in red algae. The content of Cadmium were in the range of 0.3-0.6ppm in laver, Porphyra tenera, sea mustard, Undaria pinnatifida, and tangle, Laminaria japonica, but its content was lower than those expected. 3) The content of Lead were in the range of 0.67-1.40ppm (average: 1.03ppm) in green algae, 0.60-1.00ppm (average: 0.82ppm) in brown algae, 0.56-2.40ppm (average: 1.28ppm) in red algae and its content in algae were lower than in fish and shellfish. 4) The content of Copper were in the range of 10.8-24.2ppm (average: 18.95ppm) in green algae, 7.4-24.6ppm (average: 18.16ppm) in brown algae, 6.4-31.2ppm (average: 19.94ppm) in red algae and those content were considerably abundant except for some algae. 5) The content of Nickel were in the range of 5.4-16.6ppm (average: 9.1ppm) in green algae, 1.0-4.4ppm (average: 2.32ppm) in brown algae and 0.7-4.6ppm (average: 2.59ppm) in red algae. 6) The content of Iron were in the range of 686.4-1159.0ppm (average: 916.5ppm) in green algae, 131.0-499.2ppm (average: 310.16ppm) in brown algae and 156.0-530.4ppm (average: 248.2ppm) in red algae. Especially, that of Iron in green algae showed higher value than in any other. 7) The content of Manganese were in the range of 48-221ppm (average: 157.25ppm) in green algae, 12-65ppm (average: 41ppm) in brown algae and 72-162ppm (average: 121ppm) in red algae. Especially, that of Manganese in brown algae showed lower value than in any other. 8) The content of Zinc were in the range of 191.3-451.1ppm (average: 290.05ppm) in green algae, 89.9-374.2ppm (average: 202.64ppm) in brown algae and 106.4-281.4ppm (average: 188.93ppm) in red algae. 9) The content of Magnesium were in the range of 0.48-1.83% (average: 1.27%) in green algae, 1.04-1.71% (average: 1.21%) in brown algae and 0.42-1.24% (average: 0.097%) in red algae. 10) The content of Fluorine were in the range of 29.2-92.7ppm (average: 53.03ppm) in green algae, 33.3-43.5ppm (average: 39.18ppm) in brown algae and 32.4-59.0ppm (average: 44.84ppm) in red algae.