• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.509-509
• /
• 2011

Superhydrophobic surfaces on alloyed steels were fabricated with a non-conventional method of plasma etching and subsequent water immersion procedure. High aspect ratio nanopatterns of nanoflake or nano-needle were created on the steels with various Cr content in its composition. With CF4 plasma treatment in radio-frequence chemical vapor deposition (r.-f. CVD) method, steel surfaces were etched and fluorinated by CF4 plasma, which induced the nanopattern evolution through the water immersion process. It was found that fluorine ion played a role as a catalyst to form nanopatterns in water elucidated with XPS and TEM analysis. The hierarchical patterns in micro- and nano scale leads to superhydrophobic properties on the surfaces by deposition of a hydrophobic coating with a-C:H:Si:O film deposited with a gas precursor of hexamethlydisiloxane (HMDSO) with its lower surface energy of 24.2 mN/m, similar to that of curticular wax covering lotus surfaces. Since this method is based on plasma dry etching & coating, precise patterning of surface texturing would be potential on steel or metal surfaces. Patterned hydrophobic steel surfaces were demonstrated by mimicking the Robinia pseudoacacia or acacia leaf, on which water was collected from the humid air using a patterned hydrophobicity on the steels. It is expected that this facile, non-toxic and fast technique would accelerate the large-scale production of superhydrophobic engineering materials with industrial applications.

• Macromolecular Research
• /
• 제9권6호
• /
• pp.303-312
• /
• 2001

The fabrication of liquid crystal display (LCD) panels involves several thermal processes such as imidization of the alignment layer (AL) and annealing of the rubbed polyimide AL. The nature of these processes on the LC alignment, especially on the pretilt angle (Θ$\_$p/) has been systematically studied, employing various types of polyimide structures. The imidization effect depends on the nature of polyimid precursors; Θ$\^$p/ increases with the degree of the imidization for the main-chain type of ALs, due to the decrease in the surface polarity, but this relation is not applicable to the alkylated ones in which the steric effect at the AL surface by the aliphatic side chains is dominant. Annealing of the rubbed polyimide AL deteriorates its rubbing-induced molecular orientation and subsequently the overlying LC alignment, resulting in the decrease in Θ$\_$p/. Especially, annealing of the LC cell affects the LC-AL interaction as well as the AL orientation and thus its effect on LC alignment depends sensitively on the nature of LC-polyimide interface; aromatic moiety in the polyimide structure gives better thermal stability of LC alignment while fluorinated polyimide ALs induce the less stable alignment.

• 한국재료학회지
• /
• 제11권4호
• /
• pp.294-299
• /
• 2001

기계적 합금화 방법을 이용하여 제작한 Ni-MH 전지용 $Mg_2$Ni전극의 표면 불화처리에 대한 전기화학적 충.방전 특성이 조사되었다. 20시간 밀링을 통해 제조된 $Mg_2$Ni합금은 나노결정을 가졌으며 그 $Mg_2$Ni전극의 KOH전해질내에서 충.방전 실험 결과, 초기 방전 용량이 280mAh/g이상으로 증가하였으나 10cyc1e이내에 급격히 퇴화되었다. 전극표면에서 지속적이고 안정한 불화층 형성을 목적으로 KOH용액에 잉여의 불소이온이 첨가된 $Mg_2$Ni전극의 내구성은 크게 향상되었으며 특히 2N KF를 첨가했을 경우 전극의 내구성이 가장 크게 향상되었다. 고율 방전실험의 경우도 그 성능이 90-100mAh/g으로 유지되었다 이러한 내구성 향상의 이유는 표면에 얕고 다공성인 $Mg_2$Ni층의 형성으로 인해 퇴화의 주요인인 Mg(OH)$_2$의 생성이 억제되었기 때문이었다. Effects of the surface fluorination on the electrochemical charge-discharge properties of $Mg_2$Ni electrode in Ni-MH batteries fabricated by mechanical alloying were investigated. After 20h ball milling, Mg and Ni powder formed nanocrystalline $Mg_2$Ni. Discharge capacity of this alloy increased greatly at first one cycle, but due to the formation of Mg(OH)$_2$ passive layer, it showed a rapid degradation in alkaline solution within 10cyc1es. In case of 6N KOH +xN KF electrolyte (x = 0.5, 1, 2), a continuous and stable fluorinated layer formed by adding excess F$^{-}$ ion, increased durability of $Mg_2$Ni electrode greatly and high rate discharge capability(90-100mAh/g). 2N KF addition led to the highest durability of all tested here. The reason of the improvement is due to thin MgF$_2$, which can prevent the $Mg_2$Ni electrode from forming Mg(OH)$_2$layer that is the main cause of degradation.

• 대한화장품학회지
• /
• 제25권4호
• /
• pp.97-110
• /
• 1999

The new stick make-up product was studied by using a gel, which is a viscous complex formed with clay minerals, vitamins A and E and fluorinated liquid polymer with a 1500 molecular weight. The gel cannot be obtained with any random combination of clay minerals and the ingredients described above. It takes the sequential manufacturing method as follows to get this kind of gel. Firstly, clay minerals and liquid polymers have to be pre-mixed in order to saturate the liquid polymers with the clay minerals. Then the on-processed gel has to be finely crystallized. The clay minerals, which are the core elements for this gel, were used as a function of Binder & Buffer and liquid polymer was mixed together for the deterioration of the surface tension of each component and to form a functional film in the gel. This liquid polymer was combined with clay minerals because it is not miscible with most oils and solvents. Waxes have a function of keeping a solid status in the stick. We reduced the usage of waxes by putting clay minerals as buffer in the proportion of 0.5:1 with oil phase. Ceramide takes care of the skin when used regularly and maintains the skin's moisture. Vitamins A and E contribute to preventing skin aging by the activation of skin cells. We could get the stable viscous gel, which has about 80% oil phase using clay minerals and liquid polymer. The crystalline structures of gel were surface-chemically-analyzed using SEM and Image Analyzer and were thermodynamically analyzed using DSC. Surface tension test and softness were done by Rheometer. In the end, these characteristics were verified by consumer panel tests in Seoul, Daegeon and Pusan in Korea and Hokkaido, Osaka and Miyazaki in Japan with correlation to the climate.

• 멤브레인
• /
• 제18권1호
• /
• pp.75-83
• /
• 2008

본 연구에서는 Polyethylene (PE, Asahi) 이차전지용 막의 표면불소화를 통해 기계적 강도 및 열적 안정성과 고출력에서의 안정성을 높이기 위한 연구를 실시하였다. 전자주사현미경(scanning electron microscope, SEM), 접촉각(contact angle)을 통하여 불소가스 노출시간에 따른 막의 표면과 구조의 변화를 관찰하고, 인장강도와 표면 친수성 실험을 통하여 막의 기계적 물성을 확인하였다. 제조된 막의 전기화학적 특성을 확인하기 위하여 충/방전 실험, 수명특성. 고율방전시험을 실시하여 고출력에서 온도에 대한 안정성이 향상되었음을 확인하였다.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 1999년도 IFSCC . ASCS 학술대회 발표 논문
• /
• pp.97-110
• /
• 1999

The new stick make-up product was studied by using a gel, which is a viscous complex formed with clay minerals, vitamins A and I and fluorinated liquid polymer with a 1500 molecular weight. The gel cannot be obtained with any random combination of clay minerals and the ingredients described above. It takes the sequential manufacturing method as follows to get this kind of gel. Firstly, clay minerals and liquid polymers have ·to be pre-mixed in order to saturate the liquid polymers with the clay minerals. Then tile on-processed gel has to be finely crystallized. The clay minerals, which are the core elements for this gel, were used as a function of Binder & Buffer and liquid polymer was mixed together for the deterioration of the surface tension of each component and to from a functional film in the gel. This liquid polymer was combined with clay minerals because it is not miscible with most oils and solvents. Waxes have a function of keeping a solid status in the stick. We reduced the usage of waxes by putting clay minerals as buffer in the proportion of 0.5 : 1 with oil phase. Ceramide takes care of the skin when used regularly and maintains the skin’s moisture. Vitamins A and I contribute to preventing skin’aging by the activation of skin cells. We could get the stable viscous gel, which has about 80% oil phase using clay minerals and liquid polymer, The crystal 1 me structures of gel were surface-chemical1y-analyzed using SEM and Image Analyzer and were thermodynamically analyzed using DSC, Surface tension test and softness were done by Rheometer. In the end, these characteristics were verified by consumer panel tests in Seoul, Baegeon and Pusan in Korea and Hokkaido, Oska and Miyazaki in Japan with correlation to the climate.

• 폴리머
• /
• 제34권2호
• /
• pp.97-103
• /
• 2010

6FDA를 포함한 다양한 폴리이미드/MWCNT의 전도성 복합 필름을 제조하기 위하여 MWCNT 표면에 PMMA를 도입하여 복합필름을 제조하였으며 전기 전도성의 변화를 PMMA-g-MWCNT의 농도 변화에 따라 관찰하였다. 6FDA계 폴리이미드계 복합 필름 내의 MWCNT 분산성은 PMMA-g-MWCNT의 경우 분자간의 상호 인력으로 인하여 분산도가 표면 처리하지 않은 MWCNT에 비하여 매우 높음을 확인하였다. 전기 전도도의 거동은 percolation threshold를 통하여 해석하였으며 그 결과 높은 임계 지수와 낮은 임계 농도를 가지는 6FDA-6FpDA/ PMMA-g-MWCNT 복합체가 DABA(diamino benzoic acid)를 포함한 폴리이미드 복합체에 비하여 높은 분산도를 가짐을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.270-270
• /
• 2008

We present details of experimental results in the fabrication of high density line patterns, using imprint technique that can provide a simple and comparatively cost-effective manufacturing means. Barrier array structures for display or interconnects for semiconductor applications were the aims of this study. For pattern fabrication, a polymer layer (Ajinomoto GX-13 dielectric film) with a thickness of 38um that can act as either an insulating or a dielectric layer was laminated on a substrate. Fine tracks were then formed using a patterned stamp under isostatic pressure. The line width was ranged between 10 to 60 mm. A self-assembled monolayer (SAM) of fluorinated alkylchlorosilane [$CF_3(CF_2)5(CH_2)2SiCl_3$] as an anti-sticking layer was coated on the surface of the stamp prior to thermal imprint to improve the de-molding characteristic.

• Nuclear Engineering and Technology
• /
• 제51권4호
• /
• pp.1163-1168
• /
• 2019

Hydrodynamic properties have been investigated for promising extraction systems: $0.05mol\;L^{-1}$ solutions of di(N-ethyl-4-ethylanilide) of 2,2'-bipyridine-6,6'-dicarboxylic acid, di(N-ethyl-4-fluoroanilide) of 2,6-pyridinedicarboxylic acid and di(N-ethyl-4-hexylanilide) of 2,2'-bipyridine-6,6'-dicarboxylic acid in meta-nitrobenzotrifluoride (F-3) or trifluoromethylphenyl sulfone (FS-13) diluents. To evaluate the perspectives for their use as extraction mixtures at the final stage of the nuclear fuel cycle, the change in density, viscosity, surface tension, and phase separation rate under irradiation with accelerated electrons was studied. The concentrations of extractants in the irradiated mixtures have been determined and the radiation-chemical yields have been calculated. Irradiation significantly decreases the phase separation rate at the stages of extraction and back extraction for all the studied systems. The viscosity of the DYP-7 solution in FS-13 increase above the values suitable for its use in extraction processes.

• Korean Chemical Engineering Research
• /
• 제54권3호
• /
• pp.305-309
• /
• 2016

최근에 저가의 고분자 전해질 연료전지(Proton Exchange Membrane Fuel Cells, PEMFC)용 비불소계 전해질 막 연구개발이 활발히 진행되고 있다. 본 연구에서는 sulfonated Poly (ether ether ketone) (sPEEK) MEA 내구성을 시험하기 위해 열화 가속화 기법을 이용하여 막과 전극이 동시에 열화되는 MEA 열화 실험을 진행하였다. 열화 전과 후에 I-V 분극곡선, 수소투과도, 전극 활성 면적, 막 저항과 부하 전달 저항을 측정하여 열화 전과 후를 비교하였다. sPEEK 막의 수소 투과도는 낮았지만, 저가습 OCV 조건에서 발생하는 라디칼에 Nafion과 같은 불소계막보다 sPEEK 막이 약했다. MEA 열화 실험 결과 144시간 후와 271시간 후 성능이 각각 15%와 65% 감소하였다. 144이후 급격한 성능감소의 주요인은 막에 발생한 핀홀의 Pt/C 입자에 의한 shorting 현상이라고 본다.