• 대한소아치과학회지
• /
• 제25권1호
• /
• pp.62-75
• /
• 1998

The main purpose of this study was to compare the anticariogenecity of glass ionomer restorative material polymerized by argon laser versus visible light, The results from the present study can be summarized as follows; 1. Under the polarized light microscope, the specimens of laser-cured group showed the shallower lesion body than that of visible-light cured group, both in the stage of lesion initiation and progression. 2. Glass ionomer material cured by visible light showed shallower body of lesion than that of composite resin cured by argon laser at the stage of lesion progression(p<0.05). It was suggested fluoride released from the glass ionomer might have the additive anticariogenic effect. 3. Statistical difference between groups on depth of lesion body was evident after lesion progression (p<0.05). It was suggested that anticariogenic effect by argon laser was more effective at the stage of lesion progression than the lesion initiation. 4. The increment of lesion body during progression was highest in group IV (p<0.05). 5. Based upon the above-mentioned results of this study, it can be concluded that the advantage of anticariogenic effect and short curing time of argon laser in glass ionomer polymerization should be considered in children and adolescents whose caries activity is relatively higher.

• 멤브레인
• /
• 제17권3호
• /
• pp.233-243
• /
• 2007

본 연구에서는 충전용 이차전지의 분리막으로 쓰이는 다공성 막을 기존의 분리막 재료보다 뛰어난 물성을 나타내는 PVdF(poly(vinylidene fluoride))를 사용하여 상전이 방법으로 제조하였다. 용매인 DMF(N,N-dimethylformamide)에 PVdF를 단일상으로 녹인 후 깨끗한 유리판에 캐스팅하여 막을 얻었다. 얻어진 분리막에서 가장 높은 공극률은 78.6%로 얻어졌다. UTM(universal testing machine)을 이용하여 측정된 분리막의 인장강도는 PVdF 20 wt%에서 5.16 MPa의 값을 나타내었다. 시차주사현미경(scanning electron microscopy, SEM)을 이용하여 분리막의 단면 관찰을 통해 다공성을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제11권12호
• /
• pp.1122-1127
• /
• 1998

Group II-AF_2$films such as $CaF_2$, $SrF_2$, and $BaF_2$ have been commonly used many practical applications such as silicon on insulatro(SOI), three-dimensional integrated circuits, buffer layers, and gate dielectrics in filed effect transistor. This paper presents electrical and structural properties of fluoride films as a gate dielectric layer. Conventional gate dielectric materials of TFTs like oxide group exhibited problems on high interface trap charge density($D_it$), and interface state incorporation with O-H bond created by mobile hydrogen and oxygen atoms. To overcome such problems in conventional gate insulators, we have investigated $CaF_2$ films on Si substrates. Fluoride films were deposited using a high vacuum evaporation method on the Si and glass substrate. $CaF_2$ films were preferentially grown in (200) plane direction at room temperature. We were able to achieve a minimum lattice mismatch of 0.74% between Si and $CaF_2$ films. Average roughness of $CaF_2$ films was decreased from 54.1 ${\AA}$ to 8.40 ${\AA}$ as temperature increased form RT and $300^{\circ}C$. Well fabricated MIM device showed breakdown electric field of 1.27 MV/cm and low leakage current of $10^{-10}$ A/$cm^2$. Interface trap charge density between $CaF_2$ film and Si substrate was as low as $1.8{\times}10^{11}cm^{-2}eV^{-1}$.

• 대한소아치과학회지
• /
• 제47권4호
• /
• pp.406-415
• /
• 2020

Silver diamine fluoride(SDF)는 우식의 정지를 위해 사용될 수 있는 효과적이고 경제적인 약제로, 협조가 힘든 환자나 의과적인 문제로 치료를 받기 힘든 경우 등에서 사용될 수 있다. 이 연구는 타액 생물막을 이용하여 SDF 의 항미생물효과를 평가하고자 시행되었다. 타액을 이용하여 획득피막 유사 구조를 형성한 후, 타액과 Streptococcus mutans를 첨가하여 우식원성의 타액 생물막을 형성하였다. 타액 생물막에 SDF 를 처리한 결과, 전체 미생물과 S. mutans의 수가 유의하게 감소하였다(p < 0.000). CLSM에서도 생물막 내 죽은 세포가 증가하였다. 유치 법랑질과 상아질 시편에 SDF를 처리한 후 우식원성의 생물막을 배양한 결과, SDF 를 처리할 경우 생물막 형성이 저해되는 것을 확인할 수 있었다(p = 0.029). 연구 결과 SDF의 뛰어난 항미생물효과를 확인할 수 있었으며, 이로 인한 임상에서의 항우식효과를 기대할 수 있다.

• Restorative Dentistry and Endodontics
• /
• 제27권1호
• /
• pp.12-15
• /
• 2002

The first purpose of present study was to compare the anticariogenic effect of compomer, resin modified glass ionomer cement and composite (RMGIC). The second purpose was to evaluate the recently introduced methods, which use confocal scanning micro-scope, in detecting initial caries around restoration. 2$\times$4$\times$1.5mm cavities were prepared from the recently extracted 50 human teeth on the buccal or lingual surface. The prepared teeth were randomly devided into 5 groups and restored with each filling material. Group 1: Dyract AP, Group 2: compoglass F, Group 3: F2000, Group 4: Z100. Group 5:Fuji II LC. The teeth were stored for 30 days in the distilled water, then stored in the buffer solution for artificial caries development: pH 4.3, lactic acid 100 mM, calcium 16 mM, phosphate 8mM, sodium azide 3mM. Then, the samples were sectioned longitudinally and examined with confical scanning microscope. The results showed that the use of compomer and resin modified glass ionomer cement showed caries inhibition zone whereas the composite did not. There was no difference in the width of caries inhibition zone between compomers and RMGIC. The confocal scanning microscope was useful in detecting initial caries around restoration.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.168-168
• /
• 2012

본 연구에서는 Molybdenum oxide (MoOx)-doped 4,4',4"-tris[2-naphthyl(amino)] triphenylamine(2-TNATA)의 P-doping에 의한 hole ohmic contact과 fullerene (C60)/lithium (LiF)의 electron ohmic contact에 의한 All Ohmic contact를 이용한 유기 발광 다이오드 (OLEDs)의 광저항 특성의 향상을 설명한다. 이 소자의 성능은 MoOx-doped 2-TNATA의 두께와 도핑농도에 큰 영향을 받는다. glass/ITO/MoOx-doped 2-TNATA (100 nm)/Al 구조의 소자에서 MoOx-doped 2-TNATA 도핑 농도가 25%에서 75%로 증가할수록 hole only device의 hole ohmic 특성이 향상됐다. 그 이유는 p-type doping effect 때문이다. 또한 photoemission spectra 분석결과, p-type doping effect는 hole-injecting barrier 높이는 낮추고, hole conductivity는 향상되었다. 이것은 2-TNATA에 도핑된 MoOx의 전하전송 콤플렉스의 형성으로 hole carrier의 수가 증가하여 발생되었다. MoOx-doped 2-TNATA의 hole ohmic contact과 fullerene (C60)/lithium fluoride (LiF)의 electron ohmic contact 으로 구성된 glass/ITO/MoOx-doped 2-TNATA (75%, 60 nm)/NPB (10 nm)/Alq3 (35 nm)/C60 (5 nm)/LiF (1 nm)/Al (150 nm)의 소자구조는 6,4V에서 127,600 cd/m2 최대 휘도와 약 1,000 cd/m2에서 4.7 lm/W의 높은 전력 효율을 보여준다.

• Tribology and Lubricants
• /
• 제40권3호
• /
• pp.84-90
• /
• 2024

This study investigates the effect of the surface microstructure on the tribological characteristics of glass substrates. Chemical etching using hydrofluoric acid and ammonium hydrogen fluoride was employed to create controlled asperity structures on glass surfaces. By varying the etching time from 10 to 50 min, different surface morphologies were obtained and characterized using optical microscopy, surface roughness measurements, and water contact angle analysis. Friction tests were performed using a stainless steel ball as the counter surface to evaluate the tribological behavior of the etched specimens. The results showed that the specimen etched for 20 min exhibited the lowest and most stable friction coefficient, which was attributed to the formation of a uniform and dense asperity structure that effectively reduced the stress concentration and wear at the contact interface. In contrast, specimens etched for shorter (10 min) or longer (30-50 min) durations displayed higher friction coefficients and accelerated wear owing to nonuniform asperity structures that led to local stress concentration. Optical microscopy of the wear tracks further confirmed the superior wear resistance of the 20-minute etched specimen. These findings highlight the importance of optimizing the etching process parameters to achieve the desired surface morphology for enhanced tribological performance, suggesting the potential of chemical etching as a surface modification technique for various materials in tribological applications.

• 한국해양환경ㆍ에너지학회지
• /
• 제12권1호
• /
• pp.55-59
• /
• 2009

중소형 폐 선박으로부터 생성되는 FRP를 재활용하기 위한 방법으로 층상으로 배열된 로빙층과 매트층을 분리하는 것은 에너지 면에서나 환경적인 면에서 많은 장점을 가지고 있다. 비록 로빙층과 매트층은 그 비율은 다르나 모두 수지와 유리를 포함한다는 유사성과 로빙층은 매트층에 비해 얇은 두께로 존재한다는 이유로 인해 로빙층을 매트층과 분리할 때 기계가 자동적으로 충간의 차이를 인식하기는 어렵다. 본 연구에서는 유리의 구성비가 다른 두 층의 화학적 성질의 차를 이용하여 광학적으로 층간 인식이 가능한 방법을 모색하였다. FRP에 대해 (1) FRP의 층 사이에 존재하는 수지를 녹이는 진한 황산, 또는 (2) 유리를 녹이는 염기성 용액(KOH의 메탄올과 아이소프로판올 용액), (3) 유리의 $SiO_2$와 반응하는 플루오르산(HF)용액, (4) HF 용액으로 처리한 후 수용성 염료를 도포한 경우, 각각 두 층간의 차별화가 일어났다. 이 결과를 이용하여 폐 FRP의 분리 공정이 단순화될 수 있을 것이다.

• Journal of Korean Dental Science
• /
• 제16권1호
• /
• pp.74-79
• /
• 2023

Purpose: Cention N (Ivoclar Vivadent) was a recently introduced alkasite-based restorative material that was expected to replace amalgam and glass ionomer cement. This material was an esthetic restoration with adequate mechanical strength and release of fluoride and calcium. The purpose of this study was to measure the water sorption and water solubility of Cention N and evaluate its long-term durability compared to other esthetic restorations (Resin-Modified Glass Ionomer cement [RMGIC], Giomer, Composite Resin). Materials and Methods: Twenty specimens each of Cention N (CN), Resin Modified-Glass Ionomer Cement (FJ), Giomer (BF), and Composite Resin (FZ) were made. After each specimen was completely dried in a desiccator for 24 hours using a vacuum pressure pump, the specimen was weighed (m1). After that, the specimen was immersed in distilled water at 37℃ for 7 days, stored in a drying oven, and weighed (m2). After drying completely for 24 hours in a desiccator, the specimen was weighed (m3) to calculate the water absorption and water solubility using Formulas 1 and 2. The measured values were statistically processed and analyzed using SPSS, and the significance level was set at 0.05. Result: When measuring water sorption, FJ (122.61 ㎍/mm³) showed significantly higher water sorption than CN (35.42 ㎍/mm³) (P<0.05). There was no significant difference between FZ (18.03 ㎍/mm³) and BF (14.76 ㎍/mm³) (P=0.930). When measuring water solubility, CN (6.65 ㎍/mm³) showed significantly higher water solubility than FJ (1.47 ㎍/mm³) (P<0.05). Conclusion: Cention N had lower water sorption than RMGIC, but higher water solubility, indicating that it is more vulnerable to moisture and has lessened long-term durability.

• 대한심미치과학회지
• /
• 제8권1호
• /
• pp.76-82
• /
• 1999

Zinc phosphate cement has long been the material of choice for permanent luting of cast restorations, and through many years of use has been considered effective to retain castings. However, cast restorations cemented with this material have been susceptible to secondary caries. Glass ionomer luting agents become available in the late 1970s. These material s, through release of fluoride, show considerable promise as a means of reducing secondary caries. Other favorable traits include significantly less disintegration in vivo than zinc phosphate cements, a film thickness comparable to that of zinc phosphate cement, and adhesion to tooth structure. Compomer materials were created in 1993 as a filling material for deciduous teeth, cervical lesions, and class III cavities. In the meantime, compomer have been developed as chemical hardening cements for cast gold restorations. The aim of this paper is to review the articles on luting cements to help the choice of dental cements.