• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.297-300
• /
• 1999

This study was carried out to present the properties of fresh concrete made with ground granulated blast-furnace slag (BFS) powder with variations of blaine and content, and to estimate the utilization of the BFS concrete as admixtural materials for concrete structures of the building. According to the results, the fluidity of concrete which BFS dosage rate was 45% had the considerable difference from that of concrete which BFS dosage rate was not bigger than 35%. Also, the diminution of bleeding was appeared with the increase of blaine and content of BFS. It is concluded that BFS concrete of low blaine can be used effectively in concrete structures of the building.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.339-344
• /
• 2001

This study is to investigate properties of high strength.high flowing concrete using blast-furnace slag in temperature conditions of 5, 10, 15 and $20^{\circ}C$. The result of this study can be summarized as follows. 1) The use of blast-furnace slag leads to decrease of air content and increase of fluidity in the fresh concrete. 2) The early compressive strength of high strength.high flowing concrete containing blast-furnace slag is lower than the case with portland cement only. 3) The compressive strength development of incorporating in the concrete is poor at low temperature below about $15^{\circ}C$.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1404-1409
• /
• 2007

Polymers for laser sintering were needed in order to fabricate the articles with the three-dimensional duplication equipment of SLS (selective laser sintering) process. The thermal properties, particle size, distribution, and shape of polymer powder had a close relation with the processibility of laser sintering. In this study, we prepared new polymer powders with uniform size and higher bulk density by wet process. Wet process consists of several finely-controlled steps such as dissolution, nucleation, propagation and crystallization. Several additives were added to improve the thermal, rheological, and flow properties.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.2
• /
• pp.213-223
• /
• 2009

Conventional additives were added to a newly synthesized base oil to create synthetic lubricants. Commercial polyol ester prepared in this laboratory were obtained as esterification of 1,1,1-trimethylol propane and respectively. This newly synthesized base oil had a variable chemical structure that could achieved the following properties; oxidation or thermal stability, low temperature fluidity, and higher flash points. When compared with commercial mineral lubricants, the synthetic lubricants show superior thermal and oxidation stability, and anti-wear properties.

• Journal of Pharmaceutical Investigation
• /
• v.5 no.3
• /
• pp.43-49
• /
• 1975

The rheological properties of seven mixed sugar solutions of glucose, fructose, maltose, sucrose, and two kinds of honey, the chestnut and the acacia, were discussed. The fluidity of the above samples were studied by using the applied pressure horizontal viscometer with which glycerine was confirmed to be a Newtonian flow at $25^{\circ}C$. Time required to pass the constant volume of the sample fluids through the capillary was measured at various pressure differences, ${\Delta}p$, and the ${\Delta}p$ vs ${\Delta}p{\cdot}t$ in the Poiseuille equation was plotted. Shear rate against shearing stress, on the other hand, was plotted for the sample fluids and it was found that all the sample fluids have shown a Newtonian behavior. It was interesting to note that the shear viscosity increased as the concentration of sugar solutions increased, and as the concentration of sucrose became higher than that of maltose, although the total concentration of sugar solution is constant.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.415-418
• /
• 2005

Nowadays the three major commercially available of organic chemical admixtures are modified lignosulfonates(LS), sulfonated naphthalene-formaldehyde resins (SNF) and sulfonated melamine-formaldehye (SMF). In this study, various sulfonated melamine-formaldehyde (SMF) superplasticizers were synthesized via four synthetic steps. Hydroxymethylation (Step 1), Sulfonation (Step 2), Polymerization (Step 3) and Neutralization and Stabilization (Step 4). In this synthesis of SMF, reaction conditions such as the mole ratio of melamine to formaldehyde and the amount of acid catalyst were changed. After application of SMF superplasticizer to cement paste and mortar, the physical properties including workability, slump loss, compressive strength were compared.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.521-524
• /
• 2006

In this paper, admixture factors affecting the properties of lightweight foamed concrete incorporating cement kiln dust(CKD) and fly ash(FA), respectively are discussed. Increase in CKD contents resulted in loss of fluidity and decrease in settlement of concrete noticeably. Moreover, the higher the unit weight is, the smaller the settlement depth is. The use of CKD resulted in slight decrease in compressive strength and tensile strength compared to that with other admixture. However, all mixtures met the requirement of strength prescribed in Korean Industrial Standards.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.11a
• /
• pp.117-120
• /
• 2008

The Purpose of this is properties of CFT filled with expansion concrete. CFT(concrete filled steel tube) is the structure that circle shape steel column filled with concrete. 3 kinds of expansive additives and variation of replacement rate. we changed expansive additive from 0%, 10%, 20%, 30% of ratio of addition rate are selected for this experiment. Merits of CFT are concrete internal force rising influenced by steel shape restriction, reinforcing the local buckling, excellent resistance to transformation. Generally, High rise building using CFT utilize the high strength and fluidity concrete for packing the tube inside. As the result a steel tube charged expensive concrete has stiffness 1.5times more than a steel tube not charged concrete. Increase of resisting power about compressive stress by binding expansion of expansive concrete affects strength increase and softness.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04a
• /
• pp.171-176
• /
• 1998

Recently, the Belite cement having the high fluidity, high strength, and low heat properties, was developed, and is being promoted the efforts for application on the real structures. Accordingly, for the purpose of practical use of high strength concrete using the Belite cement, was carried out the performance evaluation experiments about the structural members(column, beam, column-beam joint, steel bond strength etc.). Specimens were made in three types of concrete(Belite:350, 600kg/$\textrm{cm}^2$, OPC:350kg/$\textrm{cm}^2$) by taking into account the key parameters. In this paper, were summarized the comparative experimental results on the material properties and structural performance of Belite concrete.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04a
• /
• pp.255-260
• /
• 1998

As a part of the study on the development of augered pile method, this study is intended to investigate the properties of fresh and hardened mortar with the proportion of expansion additives. With the increase of proportion of expansion additives, the fluidity of mortar shows a decrease while air content increases and setting time gets retarded. It show the satisfactory property in strength at 5% of proportion, and shows more expansion with the increase of proportion of expansion additives and sand/cement ratio. In conclusion, both of strength and expansion reveal appropriate at 10% of proportion of expansion additives.