• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.1
• /
• pp.53-60
• /
• 2011

In this study, an organic Rankine-cycle system using HFC-134a, which is a power cycle corresponding to a low-temperature heat source, such as that for geothermal power generation, was investigated from the view point of power optimization. In contrast to conventional approaches, the heat transfer and pressure drop characteristics of the working fluid within the heat exchangers were taken into account by using a discretized heat exchanger model. The inlet flow rates and temperatures of both the heat source and the heat sink were fixed. The total heat transfer area was fixed, whereas the heat-exchanger areas of the evaporator and the condenser were allocated to maximize the power output. The power was optimized on the basis of three design parameters. The optimal combination of parameters that can maximize power output was determined on the basis of the results of the study. The results also indicate that the evaporation process has to be optimized to increase the power output.

• Journal of Embryo Transfer
• /
• v.25 no.1
• /
• pp.9-14
• /
• 2010

This study was conducted to find out the effects of artificial shrinkage (AS) on post-thaw development of bovine embryos. The blastocoelic cavity of blastocyst was punctured to remove its fluid contents and then incubated in the holding medium (HM) for 10 min. The punctured and non-punctured (control) blastocysts were equilibrated in vitrification solution 1 (VS1; TCM-199+20% FBS+10% EG) for 5 min and vitrification solution 2 (VS2; TCM199+20% FBS+35% EG+5% PVP+0.5 M Sucrose) for 1 min and vitrified by direct dropping into the liquid nitrogen. Vitrified blastocysts (punctured and control) were thawed and cultured in vitro (12 hr) for studying survival and hatching rates. The levels of shrinkage were measured by the volume of the blastocyst during equilibration in VS1 (at 1, 3 and 5 min of equilibration) and VS2 (at 30 and 60 sec of equilibration) that was considering the volume of non-punctured blastocyst in HM as 100%. The levels of shrinkage were higher in punctured group (62.4, 64.6, 64.3% at 1, 3 and 5 min in VS1; 50.6 and 52.7% at 30 and 60 sec in VS2) than control group (84.8, 86.6, 86.4% at 1, 3 and 5 min in VS1; 72.1 and 68.8% at 30 and 60 sec in VS2), but within each group the levels of shrinkage were similar. The survival (90.9%) and hatching (50.0%) rates of vitrified blastocysts at 12 hr post-thaw were higher in punctured group than that in control group (76.9% and 0.0% respectively). We confirmed that vitrification solutions (VS1 and VS2) have no toxic effect on the survival of blastocysts because the survival rates of blastocysts exposed to VS1 and VS2 for 24 hr were similar between punctured and control groups (94.3 vs. 96.0%; p>0.05). In conclusion, the preliminary data show that AS of blastocyst may improve survival and hatching rate after thawing.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2402-2411
• /
• 2018

Fluoronitriles-$CO_2$ gas mixtures are promising alternatives to $SF_6$ in environmentally-friendly gas-insulated transmission lines (GILs). Insulating gas heat transfer characteristics are of major significance for the current-carrying capacity design and operational state monitoring of GILs. In this paper, a three-dimensional calculation model was established for a GIL using the thermal-fluid coupled finite element method. The calculated results showed close agreement with experimentally measured data. The temperature distribution of a GIL filled with the Fluoronitriles-$CO_2$ mixture was obtained and compared with those of GILs filled with $CO_2$ and $SF_6$. Furthermore, the effects of the mixture ratio of the component gases and the gas pressure on the temperature rise and current-carrying capacity of the GIL were analyzed. Results indicated that the heat transfer performance of the Fluoronitriles-$CO_2$ gas mixture was better than that of $CO_2$ but worse than that of $SF_6$. When compared with $SF_6$, use of the Fluoronitriles-$CO_2$ gas mixture caused a reduction in the GIL's current-carrying capacity. In addition, increasing the Fluoronitriles gas component ratio or increasing the pressure of the insulating gas mixture could improve the heat dissipation and current-carrying capacity of the GIL. These research results can be used to design environmentally-friendly GILs containing Fluoronitriles-$CO_2$ gas mixtures.

• Journal of Energy Engineering
• /
• v.2 no.3
• /
• pp.258-267
• /
• 1993

A mathematical model has been developed to describe heat transfer phenomena in a PCM (phase change material) module for development of an energy recovery system. The PCM module, melting point of which is around 1673 K, consists of silicon(96.8%), aluminium(2.7%) and marginal amounts of impurities such as Ca, Fe and Ti. The module is covered by a capsule that consists of SiC(58%) and graphite(42%). Physical properties that are required for model predictions were cited from the references. The apparent capacity method and the postiterative method wert used in the mathematical model to describe the phase changing mechanism. Temperature and velocity of fluid are the major variables in the model calculation. For the gas temperature of 1773 K that simulates real operating conditions, the prediction shows that PCM is rapidly melted to axial direction. However, for the gas temperature of 3000 K that is higher than the real conditions, PCM is melted rapidly to the radial direction. The gas velocity has no influence on the melting phenomena of the PCM except when the gas velocity is relatively low. At the low gas velocity asymmetry of the temperature profiles in PCM is obtained.

• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.147-152
• /
• 2015

In order to develop the cooling load estimation method in the greenhouse, the cooling load calculation formula based on the heat balance method was constructed and verified by the actual cooling load measured in the fog cooling greenhouse. To examine the ventilation heat transfer in the cooling load calculation formula, we measured ventilation rates in the experimental greenhouse which a cooling system was not operated. The ventilation heat transfer by a heat balance method showed a relatively good agreement. Evaporation efficiencies of the two-fluid fogging system were a range of 0.3 to 0.94, average 0.67, and it showed that they increased as the ventilation rate increased. We measured thermal environments in a fog cooling greenhouse, and calculated cooling load by heat balance equation. Also we calculated evaporative cooling energy by measuring the sprayed amount in the fogging system. And by comparing those two results, we could verify that the calculated and the measured cooling load showed a relatively similar trend. When the cooling load was low, the measured value was slightly larger than calculated, when the cooling load was high, it has been found to be smaller than calculated. In designing the greenhouse cooling system, the capacity of cooling equipment is determined by the maximum cooling load. We have to consider the safety factor when installed capacity is estimated, so a cooling load calculation method presented in this study could be applied to the greenhouse environmental design.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.2
• /
• pp.98-105
• /
• 1999

In the present study, buoyant force and its stabilizing effects in an electrostatic field were examined systematically in order to reduce the effect of natural convection with thermal stratification in a horizontal fluid-saturated porous layer. The correlation of ionic mass transport induced by double-diffusive convection in a horizontal porous layer has been derived theoretically. And the theoretical model was examined by electrochemical experiments. The theoretical correlation for mass transport which is satisfying Forchheimer's flow equation and based on the micro-turbulence model is derived as a function of soltual Darcy-Rayleigh number, thermal Darcy-Rayleigh number and Lewis number. In the experiment, the mass transport of copper ions in $CuSO_4-H_2SO_4$ solution is measured by electrochemical technique. By assembling theoretical correlation and experimental results, the mass transport correlation induced by double-diffusive convection is proposed as $$Sh=\frac{0.03054(Rs_D-LeRa_D)^{1/2}}{1-3.8788(Rs_D-LeRa_D)^{-1/10}}$$ The present correlation looks flirty reasonable with comparing experimental results, and very promising for the applications of its prototype into various systems involving heat transfer as well as mass transfer, in order to control the effects of natural convection effectively.

• Journal of Embryo Transfer
• /
• v.10 no.2
• /
• pp.131-138
• /
• 1995

Essential and non-essential amino acids supplemented to culture medium stimulate mammalian embryo development in vitro. Amino acids such as glycine, taurine and alanine are concentrated in the lumen of oviduct and uterus and it can he thought that these amino acids may have physiological role on fertilization and embryo development. Our aim of this experiment was to investigate the effects of essential and non-essential amino acids, taurine or glycine supplemented to fertilization medium on the cleavage and subsequent in vitro development of bovine oocytes matured and fertilized in vitro. Immature oocytes were obtained from slaughtered Holstein cows and heifers and matured in TCM199 containing 10% fetal calf serum, 2.5 $\mu$g /mL of FSH and LH and 1 $\mu$g / mL of estradiol with granulosa cells in vitro. After maturation, oocytes were coincubated with sperm in fertilization medium supplemented with Minimum Essential Medium (MEM) essential and non-essential amino acids, taurine (3.75 mM) or glycine (10 mM) for 30 hours in vitro. Inseminated oocytes were cultured in synthetic oviduct fluid medium (SOEM) containing MEM essential, non-essential amino acids and 1 mM glutarnine up to 8 days after fertilization.Supplementation of fertilization medium with MEM essential and non-essential amino acids lowered significantly (p<0.05 and p<0.001) the cleavage rate after 30 hours of IVF (53.3%) and at Day 3 (62.7%: Day 0: the day of I VF) compared to control (64.3% and 77.3%, respectively). Subsequent developmental rates to morulae (Mo) and expanding blastocysts (ExBL) also significantly decreased (p<0.001 and p<0.05 for Mo and ExBL) when oocytes were coincubated with sperm in the medium containing MEM amino acids. Taurine added to fertilization medium have not increased the cleavage rate over the control, whereas glycine showed significantly lower (p<0.01) cleavage rate at Day 3 than that of taurine, but there was no significant difference in the developmental rates to Mo and ExBL of bovine embryos irrespective of the supplementation of taurine or glycine to fertilization medium. In conclusion, supplementation of fertilization medium with essential and non-essential amino acids, taurine or glycine has no beneficial effect on in vitro cleavage and development of bovine oocytes matured and fertilization in vitro.

• Journal of Embryo Transfer
• /
• v.19 no.3
• /
• pp.275-282
• /
• 2004

This study was carried out to examine the effects of development media and those change on in vitro development (IVD) of porcine oocytes matured and fertilized in vitro. Putative embryos, which were matured in vitro in modified NCSU-23 (mNCSU-23) supplemented with 10％ porcine follicular fluid (pFF) and were fertilized in mTBM, were developed in vitro as the experimental scheme. The results are as follows. When porcine putative embryos were cultured in vitro in NCSU-23 or CZB/Pig-MEM, the percentage of oocytes cleaved was not different between two systems, but the percentage of blastocysts in NCSU-23 was significantly higher than in CZB/Pig-MEM (P<0.05). And when porcine putative embryos were cultured in vitro in NCSU-23 during 7 days with or without changing media at day 5, which was supplement with or without 10％ fetal bovine serum(FBS), the percentage of oocytes cleaved, blastocysts at day 6, and the cell number of ICM, TE and total of blastocysts at day 7 were not different among three treatments. As a result of this study, it is supposed that NCSU-23 be more favorable, to develop porcine embryos derived from IVM/IVF, than CZB/Pig-MEM, but that demonstration on the effects of changing medium with fresh one stand in need of the more experiments.

• Journal of Embryo Transfer
• /
• v.22 no.1
• /
• pp.21-26
• /
• 2007

본 연구는 mSOF(modified synthetic oviduct fluid medium) 배양액을 이용하여 $100{\mu}1$와 $10{\mu}1$ 배양 소적에서 일본 흑우의 수정란 생산 효율을 개선하기 위하여 수행하였다. 난구세포가 부착된 미성숙 난자는 각각 단독 배양조건($S;\;10{\mu}1$ 소적) 및 그룹 배양 조건 ($G;\;100{\mu}1$ 소적)에서 실시하였고 배양액은 TCM-199의 기본 배지에 10% FCS, 0.02IU/ml FSH와 $1{\mu}g/ml$ $estradiol-17{\beta}$를 첨가하여 사용하였다. 배반포 단계로 발육한 수정란은 1.5M ethylene glycol로 직접 이식법에 의한 동결 방법으로 동결을 실시하였고, 세포수는 융해 후 생존 수정란에 대해 조사하였다. 체외 배양 시간이 $16{\sim}17$시간 배양 조건에서 난자의 성숙율은 그룹 배양 조건$(27.1{\pm}16.8%)$보다는 단독 배양조건$(57.1{\pm}15.0%)$에서 성숙율이 높았다(p<0.05). 그러나 체외 배양 시간이 $18{\sim}19$ 시간과 $20{\sim}21$시간 배양시는 유사한 성숙율을 보였다. 난자의 체외 배양율은 체외 배양 시간의 증가에 의해 성숙도가 $86.3{\pm}9.9%$로 증가하였다. 접합체(zygote)의 분할율은 단독이나 그룹 배양 조건에서도 유사한 결과를 얻었다. 배반포 발달율은 배양 $7{\sim}8$일째에 조사한 결과 단독 배양 방법보다는 그룹 배양 방법에서 발달율이 높았으나, 분할된 접합체를 기준으로 한 경우 배반포 발달율$(S;\; 21.4{\pm}10.6%,\;G;\;39.0{\pm}13.1%)$에서는 유의적인 차이가 없었다. 단독 배양과 그룹 배양에서 $6.5{\pm}8$일 사이에 배반포로 발달된 수정란의 세포수 조사에서는 유사한 결과를 얻었다. 동결 융해 후 24시간 배양 후 배반포 생존율(5; 24.2%, G; 30.2%), 부화율(S: 20.9%, G: 12.7%) 및 생존 수정란수(S; 45.2%, G: 42.8%)에서도 배양 조건에 따른 유의적인 차는 없었다. 결론적으로 mSOF배양액을 이용하는 경우 미성숙 난자의 체외 성숙 유도 배양 시 단독이나 그룹 배양 시 배반포 발달율에서 그룹간에 유의적인 차가 인정되었다(p<0.01).

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.7
• /
• pp.969-976
• /
• 2009

Use of oocytes from prepubertal animals for in vitro embryo production holds potential application for reducing generation intervals and increasing genetic progress through embryo transfer. The objective of these studies was to compare the effect of three sperm pretreatments (prior to in vitro fertilization) and seven embryo culture protocols on fertilization rate and (or) subsequent development of in vitro fertilized embryos derived from oocytes harvested from ovaries of 1-6 month old prepubertal Boer goats in China. Cleavage rates were highest for embryos fertilized with heparin-treated versus calcium ionophore- or caffeine-treated sperm. Similar rates of blastocyst development were observed using heparin- and ionophore-treated sperm, which were higher than obtained with caffeine-treated sperm. No differences in cleavage or blastocyst rates were observed following embryo culture in basal medias (synthetic oviductal fluid (SOF), Charles Rosenkrans 1 (CR1) or tissue culture medium-199 (TCM-199)) containing 10% fetal bovine serum (FBS). Cumulus or oviductal cell co-culture did not enhance cleavage or blastocyst rates relative to culture in SOF+10% FBS. Replacement of FBS in SOF medium with 0.3% BSA increased cleavage rates, but did not increase rates of blastocyst development. Sequential culture in SOF+0.3% BSA followed by SOF+10% FBS increased blastocyst yield versus continuous culture in SOF+10% FBS and tended to increase blastocyst yield versus continuous culture in SOF+0.3% BSA. These results demonstrate a pronounced effects of sperm pretreatments and in vitro embryo culture systems on rates of blastocyst development and provide a potential protocol (sperm pretreatment with heparin and sequential embryo culture in SOF+0.3% BSA followed by SOF+10% FBS) for generation of the significant numbers of in vitro produced blastocysts from oocytes of prepubertal Boer goats necessary for application of embryo transfer in rural regions of China for distribution of Boer goat genetics.