• 해양환경안전학회지
• /
• 제27권2호
• /
• pp.369-376
• /
• 2021

전 세계적으로 환경오염 문제로 국제해사기구인 IMO(International Maritime Organization)에서는 이산화탄소 배출량과 관련된 지수인 EEDI(Energy Efficiency Design Index)를 만들어 새로 건조되는 선박들에 대한 규제를 적용하고 있다. 본 연구에서는 158k 원유운반선의 선형과 프로펠러 후류를 분석하여 새로운 형태의 에너지 저감 장치인 ring stator를 제안하였다. 최근의 선박들은 반류가 적은 즉 선미부 유속이 빠른 경향으로 발전되고 있어 덕트가 포함된 ESD(Energy Saving Device)는 저속비대선이라도 컨테이너선처럼 적용하기가 어렵다. 본 연구에서 제안한 ring stator는 이러한 점을 고려하여 새로이 개발된 장치로써 자항 성능 향상 뿐 아니라 저항 성능의 최소화를 목표로 설계를 진행하였다. Star-CCM+의 상용 프로그램을 활용하여 CFD 해석을 통해 설계한 ring stator의 성능을 확인하였고 최종 제시한 설계안에 대해 약 3.4 %의 추진 효율 개선 효과가 있음을 확인하였다. 설계된 ring stator에 대한 실험과의 비교 등을 통해 성능 검증 및 보다 정도 높은 최적화에 대한 연구를 추후 수행할 계획이다.

• 한국해안·해양공학회논문집
• /
• 제32권6호
• /
• pp.420-433
• /
• 2020

기존 케이슨방파제의 안정성을 높이기 위해 케이슨 전면 또는 후면에 추가로 신규 케이슨을 설치하여 보강하는 경우 박리에 의한 에너지 손실효과와 케이슨과 케이슨 사이의 공극률 변화에 따른 개별 원형케이슨에 작용하는 파력 및 파처오름 특성 평가는 중요하다. 본 연구에서는 고유함수전개법에 투과성판에서의 속도는 판 전후의 압력차에 선형적으로 비례한다는 Darcy의 법칙을 이용하여 원형케이슨들간의 공극률 계수 변화에 따른 2열 배치된 원형방파제에 작용하는 파랑 특성을 분석하였다. 수치해석의 신뢰성을 확보하기 위해 Sankarbabu et al.(2008)의 수치 해석결과와 비교를 수행하였으며, 다양한 변수에 따른 개별 이중 원형케이슨에 작용하는 파력 및 파처오름 특성을 나타내었다.

• Archives of Plastic Surgery
• /
• 제49권2호
• /
• pp.174-183
• /
• 2022

Management of traumatic skull base fractures and associated complications pose a unique reconstructive challenge. The goals of skull base reconstruction include structural support for the brain and orbit, separation of the central nervous system from the aerodigestive tract, volume to decrease dead space, and restoration of the three-dimensional appearance of the face and cranium with bone and soft tissues. An open bicoronal approach is the most commonly used technique for craniofacial disassembly of the bifrontal region, with evacuation of intracranial hemorrhage and dural repair performed prior to reconstruction. Depending on the defect size and underlying patient and operative factors, reconstruction may involve bony reconstruction using autografts, allografts, or prosthetics in addition to soft tissue reconstruction using vascularized local or distant tissues. The vast majority of traumatic anterior cranial fossa (ACF) injuries resulting in smaller defects of the cranial base itself can be successfully reconstructed using local pedicled pericranial or galeal flaps. Compared with historical nonvascularized ACF reconstructive options, vascularized reconstruction using pericranial and/or galeal flaps has decreased the rate of cerebrospinal fluid (CSF) leak from 25 to 6.5%. We review the existing literature on this uncommon entity and present our case series of n = 6 patients undergoing traumatic reconstruction of the ACF at an urban Level 1 trauma center from 2016 to 2018. There were no postoperative CSF leaks, mucoceles, episodes of meningitis, or deaths during the study follow-up period. In conclusion, use of pericranial, galeal, and free flaps, as indicated, can provide reliable and durable reconstruction of a wide variety of injuries.

• 한국축산식품학회지
• /
• 제43권2호
• /
• pp.232-244
• /
• 2023

We investigated the effects of different phosphate replacements on the quality of ground pork products cured with sodium nitrite or radish powder to determine their potential for achieving clean-label pork products. The experimental design was a 2×5 factorial design. For this purpose, the ground meat mixture was assigned into two groups, depending on nitrite source. Each group was mixed with 0.01% sodium nitrite or 0.4% radish powder together with 0.04% starter culture, and then processed depending on phosphate replacement [with or without 0.5% sodium tripolyphosphate; STPP (+), STPP (-), 0.5% oyster shell calcium (OSC), 0.5% citrus fiber (CF), or 0.5% dried plum powder (DPP)]. All samples were cooked, cooled, and stored until analysis within two days. The nitrite source had no effect on all dependent variables of ground pork products. However, in phosphate replacement treatments, the STPP (+) and OSC treatments had a higher cooking yield than the STPP (-), CF, or DPP treatments. OSC treatment was more effective for lowering total fluid separation compared to STPP (-), CF, or DPP treatments, but had a higher percentage than STPP (+). The STPP (+) treatment did not differ from the OSC or CF treatments for CIE L^* and CIE a^*. Moreover, no differences were observed in nitrosyl hemochrome content, lipid oxidation, hardness, gumminess, and chewiness between the OSC and STPP (+) treatments. In conclusion, among the phosphate replacements, OSC addition was the most suitable to provide clean-label pork products cured with radish powder as a synthetic nitrite replacer.

• 한국항공우주학회지
• /
• 제46권1호
• /
• pp.1-9
• /
• 2018

람다 날개 형태의 무인전투기는 동체-날개 융합익의 형태를 띄고 있어 일반적인 항공기에 비해 상대적으로 항력이 작고 레이더 반사 면적이 작아 우수한 스텔스 성능을 갖는다. 그러나 앞전 후퇴각에 의해 생성되는 앞전 와류의 영향으로 특정 받음각에서 피칭모멘트가 급격히 증가하는 현상이 나타난다. 본 연구에서는 무미익 람다 날개 형상을 기반으로 한 UCAV 1303 모델을 사용하여 풍동시험과 전산해석을 수행하였다. 실험 풍속은 50 m/s, 받음각 범위는 $-4^{\circ}{\sim}28^{\circ}$ 으로 하였으며 전산해석 또한 실험 조건과 동일하게 연구를 수행하였다. 본 연구를 통해 UCAV의 날개 비틀림이 피칭모멘트의 안정성에 미치는 영향을 확인하였다. 그 결과 날개에 음의 비틀림 각을 적용하였을 때 날개 바깥쪽에서의 유동 박리가 지연되면서 Pitch-break가 발생하는 받음각이 증가하였고, 양의 비틀림 각을 적용하였을 때 Pitch-break가 발생하는 받음각이 감소하였지만 양항비가 증가하는 것을 확인하였다.

• 한국산학기술학회논문지
• /
• 제17권3호
• /
• pp.622-628
• /
• 2016

자동차에 부착하여 사용하는 자전거 캐리어 지지용 흡착 패드는 운행 중 임의의 진동과 원심력과 같은 과도한 동적 하중을 받을 수 있어, 구조 안전성의 검토가 중요하다. 이를 위해서는 유체-구조 연계 유한요소해석을 이용하여 패드의 하부 압력이 패드에 가해지는 하중이나 모멘트의 변화에 따라 실시간으로 변화하는 것을 고려하여야 하나, 실제 상황의 모델링이 어렵고 계산을 위한 소프트웨어 비용이 높은 단점이 있기도 하지만, 정확한 결과를 얻기도 어렵다. 따라서 이 논문에서는 실험과 전산적인 방법을 조합하여 활용하는 새로운 방법을 제시한다. 이는 변화하는 하중에 따라 패드 하부의 압력과 접촉 면적을 실시간으로 측정하고 여기서 얻어진 데이터를 비선형 탄성 유한요소해석에 입력하여 활용하는 방법이다. 개발 단계의 제품 형상으로 실험 및 계산을 수행한 결과, 마운트 패드는 축 방향 하중에 대해서는 비교적 안전하나, 회전 하중이 과도하게 작용할 경우 패드가 바닥으로부터 분리되거나 패드 표면에 국부적인 손상이 일어날 수 있어 안전 여유가 많지 않음을 보여주었다. 작용하는 하중의 크기 및 형태에 따라 변화하는 접촉 거동을 예측하는 결과는 실험 결과와 잘 일치하였다. 본 연구에서 제안하는 해석 방법은 유사한 흡착 패드 시스템을 설계할 때 유용하게 활용될 수 있을 것으로 보인다.

• KIEAE Journal
• /
• 제17권1호
• /
• pp.69-75
• /
• 2017

Purpose: Heat transfer analysis of recently developed 'slim type double-skin system window' were presented. This window system is designed for curtain wall type façade that main energy loss factor of recent elegant buildings. And the double skin system is the dual window system integrated with inner shading component, enclosed gap space made by two windows when both windows were closed and shading component effectively reflect and terminate solar radiation from outdoor. Usually double-skin system requires much more space than normal window systems but this development has limited by 270mm, facilitated for curtain wall façade buildings. In this study, we estimated thermophysical phenomena of our double-skin curtain wall system window with solar load conditions at the summer season. Method: A fully 3-Dimentional analysis adopted for flow and convective and radiative heat transfer. The commercial CFD package were used to model the surface to surface radiation for opaque solid region of windows' frame, transparent glass, fluid region at inside of double-skin and indoor/outdoor environments. Result: Steep angle of solar incident occur at solar summer conditions. And this steep solar ray cause direct heat absorption from outside of frame surface rather than transmitted through the glass. Moreover, reflection effect of shading unit inside at the double-skin window system was nearly disappeared because of solar incident angle. With this circumstances, double-skin window system effectively cuts the heat transfer from outdoor to indoor due to separation of air space between outdoor and indoor with inner space of double-skin window system.

• Tuberculosis and Respiratory Diseases
• /
• 제79권3호
• /
• pp.165-178
• /
• 2016

Background: Although recent metagenomic approaches have characterized the distinguished microbial compositions in airways of asthmatics, these results did not reach a consensus due to the small sample size, non-standardization of specimens and medication status. We conducted a metagenomics approach by using terminal restriction fragment length polymorphism (T-RFLP) analysis of the induced whole sputum representing both the cellular and fluid phases in a relative large number of steroid $na{\ddot{i}}ve$ asthmatics. Methods: Induced whole sputum samples obtained from 36 healthy subjects and 89 steroid-$na{\ddot{i}}ve$ asthma patients were analyzed through T-RFLP analysis. Results: In contrast to previous reports about microbiota in the asthmatic airways, the diversity of microbial composition was not significantly different between the controls and asthma patients (p=0.937). In an analysis of similarities, the global R-value showed a statistically significant difference but a very low separation (0.148, p=0.002). The dissimilarity in the bacterial communities between groups was 28.74%, and operational taxonomic units (OTUs) contributing to this difference were as follows: OTU 789 (Lachnospiraceae), 517 (Comamonadaceae, Acetobacteraceae, and Chloroplast), 633 (Prevotella), 645 (Actinobacteria and Propionibacterium acnes), 607 (Lactobacillus buchneri, Lactobacillus otakiensis, Lactobacillus sunkii, and Rhodobacteraceae), and 661 (Acinetobacter, Pseudomonas, and Leptotrichiaceae), and they were significantly more prevalent in the sputum of asthma patients than in the sputum of the controls. Conclusion: Before starting anti-asthmatic treatment, the microbiota in the whole sputum of patients with asthma showed a marginal difference from the microbiota in the whole sputum of the controls.

• 한국축산식품학회지
• /
• 제37권3호
• /
• pp.360-367
• /
• 2017

This study was conducted to investigate the effect of duck skin on cooking loss, emulsion stability, pH, color, protein solubility, texture profile analysis (TPA), apparent viscosity, and sensory characteristics of press type duck ham with different ratio of duck breast meat and duck skin. Five duck ham formulations were produced with the following compositions: T1 (duck breast 70% + duck skin 30%), T2 (duck breast 60% + duck skin 40%), T3 (duck breast 50% + duck skin 50%), T4 (duck breast 40% + duck skin 60%), and T5 (duck breast 30% + duck skin 70%). The cooking loss and fat separation were lower in T1, and the total expressible fluid separations were lower in T1 and T2 than others. The pH ranged from 6.48 to 6.59, with the highest values in T4 and T5. T5 had the highest CIE $L^*$-value, and T1 and T2 had the highest CIE $a^*$-values; however, CIE $b^*$-values did not differ significantly between the duck ham samples. The protein solubility and TPA (hardness, springiness, cohesiveness, gumminess, and chewiness) were the highest in T1. T1 and T2 had higher scores for color, tenderness, and overall acceptability. T1, T2, and T3 showed significantly higher values, but there were no significant differences for flavor and juiciness. Regarding apparent viscosity properties, T1 and T2 had higher viscosity values than the other formulations. In conclusion, the T1 (duck breast 70% + duck skin 30%) and T2 (duck breast 60% + duck skin 40%) duck hams show the highest quality characteristics.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1998년도 제6회 하계 Workshop (98 한국막학회, 국립환경연구원 국제 Workshop, 수자원 보전과 막분리 공정)
• /
• pp.135-153
• /
• 1998

Nanofiltration (NF) is a recently introduced term in membrane separation. In 1988, Eriksson was one of the first authors using the word 'nanofiltration' explicitly. Some years before, FilmTech started to use this term for their NF50 membrane which was supposed to be a very loose reverse osmosis membrane or a very tight ultrafiltration membrane. Since then, this term has been introduced to indicate a specific boundary of membrane technology in between ultrafiltration and reverse osmosis. The application fields of the NF membranes are very broad as follows: Demeneralizing water, Cleaning up contaminated groundwater, Ultrapure water production, Treatment of effleunts containing heavy metals, Offshore oil platforms, Yeast production, Pulp and paper mills, Textile production, Electroless copper plating, Cheese whey production, Cyclodextrin production, Lactose production. The earliest NF membrane was made by Cadotte et al, using piperazine and trimesoyl chloride as monomers for the formation of polyamide active layer of the composite type membrane. They coated very thin interfacially potymerized polyamide on the surface of the microporous polysulfone supports. The NF membrane exhibited low rejections for monovalent anions (chloride) and high rejections for bivalent anions (sulphate). This membrane was called NS300. Some of the earliest NF membranes, like the NF40 membrane of FilmTech, the NTR7250 of Nitto-Denko and the UTC20 and UTC60 of Toray, are formed by a comparable synthesis route as the NS300 membrane. Commercially available NF membranes nowadays are as follows: ASP35 (Advanced Membrane Technology), MPF21; MPF32 (Kiryat Weizmann), UTC20; UTC60; UTC70; UTC90 (Toray), CTA-LP; TFCS (Fluid Systems), NF45; NF70 (FilmTec), BQ01; MX07; HG01; HG19; SX01; SX10 (Osmonics), 8040-LSY-PVDI (Hydranautics), NF CA30; NF PES 10 (Hoechst), WFN0505 (Stork Friesland). The typical ones among the commercially available NF membranes are polyamide composite membrane consisting of interfacially polymerized polyamide active layer and microporous support. While showing high water fluxes and high rejections of multivalent ions and small organic molecules, these membranes have relatively low chemical stability. These membranes have low chlorine tolerance and are unstable in acid or base solution. This chemical instability is appearing to be a big obstacle for their applications. To improve the chemical stability, we have tried, in this study, to prepare chemically stable NF membranes from PVA. The ionomers and interfacially polymerized polyamide were used for the modification of'the PVA membranes. For the detail study of the active layer, homogeneous NF membranes made only from active layer materials were prepared and for the high performance, composite type NF membranes were prepared by coating the active layer materials on microporous polysulfone supports.