• Journal of Chest Surgery
• /
• v.35 no.4
• /
• pp.290-295
• /
• 2002

Backgroud: Pneumonectomy carries the possibility of numerous dangerous complications as well as the vast effect the operation itself has on the cardiopulmonary function. Most of operations are done with the insertion of the chest tubes upon completion, but because of the high incidence of pyothorax as its complications, we have tried to analyze and compare the cases without inserting the chest tubes. Material and Method: During a 5 year period from January, 1996 to December 2000, 100 cases, which were operated at the Hanyang University Hospital, were selected using the patient's charts. The age, gender, indication of operation, associated diseases, and operation site(left or right) were classified accordingly and the postoperative complications and mortality were statistically analyzed using the $\chi$ 2-test. After resecting the lung, the intrathoracic pressure was set at -15 ~ -20cm $H_2O$ using the nelaton catheter, and the thoracotomy site was then closed. The gradual collection of the fluid and blood in the thorax of the operated side, as well as the mediastinum location, were observed carefully for 4~5 days postoperatively with the aid of the simple chest x-rays. Result: Of the 100 cases, 16 cases of pulmonary tuberculosis(16%), 81 cases of lung tumor(81%), 2 cases of bronchiectasis(2%), and 1 case of aspergilloma associated bronchiectasis were noted. There were 8 mortality cases(8%), and of the 34 cases(34%), 44 complications were noted. The age, sex, and operation site(left or right) were not statistically significant with the complications. 7 of the 16 cases of pulmonary tuberculosis(44%) and 27 of the 81 cases of lung tumor(33%) had complications, but they were found not to be statistically significant. The increase of the complication rate in the pulmonary tuberculosis patients was 3.86. The evidence of postoperative bleeding was observed in 6 cases with the 3 cases being the pulmonary tuberculosis patients and the 3 cases were others. This shows that the increase in postoperative bleeding in the pulmonary tuberculosis is statistically significant(p=0.019). Of the 100 cases, there were 8 mortality cases(8%), with 5 cases from the 81 cases of the lung tumor group(6.1%), 3 cases from the 16 cases of pulmonary tuberculoses group(18.7%).

• Clinical and Experimental Pediatrics
• /
• v.49 no.5
• /
• pp.533-538
• /
• 2006

Purpose : The headache, one of the symptoms of meningitis, is related to abrupt elevation of intracranial pressure(ICP) or stimulation of intracranial nociceptive structure. However, in cases of mild elevation of ICP or normal findings of cerebrospinal fluid(CSF) analysis, patients sometimes complain of headaches. Therefore, other pathways may contribute to the occurrence of headaches in aseptic meningitis or meningismus. We intend to investigate the role of substance P(SP) and calcitonin gene-related peptide(CGRP) in aseptic meningitis or meningismus. Methods : We measured leukocyte count, the concentration of protein and glucose in CSF and ICP of patients with meningeal irritation sign. We also measured SP and CGRP levels by using immunoassay. We analyzed the relationship between the presence of headache and the value of SP and CGRP. Results : The concentrations of CGRP($18.8{\pm}10.5ng/mL$) in CSF and ICP($14.8{\pm}4.5cmH_2O$) in aseptic meningitis group were significantly higher than in those($14.1{\pm}7.4ng/mL$ and $12.0{\pm}5.1cmH_2O$, respectively) of the meningismus group(P<0.05). There was no significant difference in the SP levels between the two groups. In the aseptic meningitis group, the concentrations of SP and CGRP were significantly higher in the normal ICP group than in the elevated ICP group(P<0.05). Conclusion : Headaches in children with aseptic meningitis or meningismus is considered to be related to the elevation of the CSF levels of SP and CGRP.

• Tunnel and Underground Space
• /
• v.28 no.5
• /
• pp.400-425
• /
• 2018

This study presents the research results and current status of the DECOVALEX-2019 project Task B. Task B named 'Fault slip modelling' is aiming at developing a numerical method to simulate the coupled hydro-mechanical behavior of fault, including slip or reactivation, induced by water injection. The first research step of Task B is a benchmark simulation which is designed for the modelling teams to familiarize themselves with the problem and to set up their own codes to reproduce the hydro-mechanical coupling between the fault hydraulic transmissivity and the mechanically-induced displacement. We reproduced the coupled hydro-mechanical process of fault slip using TOUGH-FLAC simulator. The fluid flow along a fault was modelled with solid elements and governed by Darcy's law with the cubic law in TOUGH2, whereas the mechanical behavior of a single fault was represented by creating interface elements between two separating rock blocks in FLAC3D. A methodology to formulate the hydro-mechanical coupling relations of two different hydraulic aperture models and link the solid element of TOUGH2 and the interface element of FLAC3D was suggested. In addition, we developed a coupling module to update the changes in geometric features (mesh) and hydrological properties of fault caused by water injection at every calculation step for TOUGH-FLAC simulator. Then, the transient responses of the fault, including elastic deformation, reactivation, progressive evolutions of pathway, pressure distribution and water injection rate, to stepwise pressurization were examined during the simulations. The results of the simulations suggest that the developed model can provide a reasonable prediction of the hydro-mechanical behavior related to fault reactivation. The numerical model will be enhanced by continuing collaboration and interaction with other research teams of DECOLVAEX-2019 Task B and validated using the field data from fault activation experiments in a further study.

• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.67-72
• /
• 2006

Injection of $CO_2$ into underground saline formations, due to their large storage capacity, is probably the most promising approach for the reduction of $CO_2$ emissions into the atmosphere. $CO_2$ storage must be carefully planned and monitored to ensure that the $CO_2$ is safely retained in the formation for periods of at least thousands of years. Seismic methods, particularly for offshore reservoirs, are the primary tool for monitoring the injection process and distribution of $CO_2$ in the reservoir over time provided that reservoir properties are favourable. Seismic methods are equally essential for the characterisation of a potential trap, determining the reservoir properties, and estimating its capacity. Hence, an assessment of the change in seismic response to $CO_2$ storage needs to be carried out at a very early stage. This must be revisited at later stages, to assess potential changes in seismic response arising from changes in fluid properties or mineral composition that may arise from chemical interactions between the host rock and the $CO_2$. Thus, carefully structured modelling of the seismic response changes caused by injection of $CO_2$ into a reservoir over time helps in the design of a long-term monitoring program. For that purpose we have developed a Graphical User Interface (GUI) driven rock physics simulator, designed to model both short and long-term 4D seismic responses to injected $CO_2$. The application incorporates $CO_2$ phase changes, local pressure and temperature changes. chemical reactions and mineral precipitation. By incorporating anisotropic Gassmann equations into the simulator, the seismic response of faults and fractures reactivated by $CO_2$ can also be predicted. We show field examples (potential $CO_2$ sequestration sites offshore and onshore) where we have tested our rock physics simulator. 4D seismic responses are modelled to help design the monitoring program.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.3
• /
• pp.191-200
• /
• 2017

Proper packaging design can meet both the environmental and economic aspects of packaging materials by reducing the use of packaging materials, waste generation, material costs, and logistics costs. Finite element analysis(FEM) is used as a useful tool in various fields such as structural analysis, heat transfer, fluid motion, and electromagnetic field, but its application in the field of packaging is still insufficient. Therefore, the application of FEM to the field of packaging can save the cost and time in the future research because it is possible to design the package by computer simulation, and it is possible to reduce the packaging waste and logistics cost through proper packaging design. Therefore, this study investigated the FEM papers published in Korea for the purpose of helping research design using FEM program in the field of packaging in the future. In this paper, we analyzed the 29 papers that were directly related to the analysis of FEM papers published in domestic journals from 1991 to 2017. As a result, we analyzed the research topic, FEM program, and analysis method using each paper, and presented the direction that can be applied in future packaging field. When the FEM is applied to the packaging field, it is possible to change the structure and reduce the thickness through the stress and vibration analysis applied to the packaging material, thereby reducing the cost by improving the mechanical strength and reducing the amount of the packaging material. Therefore, in the field of packaging research in the future, if the FEM is performed together, economical and reasonable packaging design will be possible.

• Journal of Sericultural and Entomological Science
• /
• v.18 no.2
• /
• pp.89-93
• /
• 1976

The physiological saline solution for animals is known as Ringer's solution which is used for keeping the function of cold blooded vertebrate animals. Primaily the saline solution is used for the purpose of perfusion experiment in frogs. Later the saline solution is applied in several kinds of animals including human being with satisfactory results. However, this saline solution was introduced to silkworm and it was found that the result was not as successful as in the case of other animals and human being. Normally, in the case of silkworm, the physiological saline solution is prepared in order to maintain the normal function of separated organs and tissues. To this end, the saline solution is adjusted to contain the certain amount and strength of ions, osmosis pressure and hydrogen concentration. The most of cases, the physiological saline solution should be prepared so that the constituent of the solution be the same with the blood selium and body fluid. The hydrogen concentration in the ion element of the saline solution is adjustable by adding Na$\^$＋/, K$\^$＋/, Ca$\^$＋＋/, Mg$\^$＋＋/ which are followed by adding of buffer solution such as NaHCO$_3$and NaH$_2$PO$_4$. Determination of optimum concentration of cation in the physiological saline solution, and the optimum mixing rate of more than two kinds of cations are based on the movement of dorsal vessel in the silkworm larvae. The optimum concentration of cations in the solution is prepared by adding NaCl solution which is under zero point. However, this solution was further added with the different concentration of KCl and CaCl$_2$. By dropping the prepared solution on the 5th larvae, the effects of solution was measured. The measurement was done by observation of movement' of dorsal vessel and its time length, and the number of pulses. According to the experiment, it was found that when only NaCl solution was applied, the number of pulses is increased for a moment, and the pulse stopped after one hour or so. When KCl solution was added the time of pulse was prolonged and in the contrast, the number of pulses was slow down. If KCl and CaCl$_2$solutions are added the time of pulse was further prolonged. Even though the adding of KCl and CaCl$_2$are found to be effectible, the correlation between the concentration of solution and the movement of dorsal vessel was not observed. However, it was same in the case of adding Ca$\^$＋＋/ or K$\^$＋/. It was found that when Mg$\^$＋＋/ was added to dorsal vessel the number of the pulses was not decreased although the prolonged time pulse was observed.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.21 no.2
• /
• pp.131-136
• /
• 1985

The calculation of the resulting fluid motion is an important problem of ship hydrodynamics. For a partially immersed body the condition of constant pressure at the free surface can be linearized. The resulting linear boundary-value problem for the velocity potential is the Neumann-Kelvin problem. The two-dimensional Neumann-Kelvin problem is studied for the half-immersed circular cylinder by Ursell. Maruo introduced a slender body approach to simplify the Neumann-Kelvin problem in such a way that the integral equation which determines the singularity distribution over the hull surface can be solved by a marching procedure of step by step integration starting at bow. In the present pater for the two-dimensional Neumann-Kelvin problem, it has been suggested that any solution of the problem must have singularities in the corners between the body surface and free surface. There can be infinitely many solutions depending on the singularities in the coroners.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.6
• /
• pp.1225-1233
• /
• 1997

Background : Cervical tuberculous lymphadenitis(CTL) is one of the most common extra-pulmonary tuberculosis. Recently overall incidence of pulmonary tuberculosis has decreased, but the incidence of tuberculous lymphadenitis has not decreased. Its duration of treatment is still controversial and the pathogenesis, prognosis and relationship with other site tuberculous are poorly published. So we did a retrograde study of 120 cases of confirmed CTL about its clinical manifestations. Method : All patients were applied fine needle aspiration(FNA) of palpable enlarged cervical lymph nodes and 114 patients were examined for AFB smear and 34 patients for TB culture with aspirated fluid. 57 patients were examined Mantoux test(5TU with PPD-S). With above methods, a total of 120 patients was diagnosed as having CTL. Results : 1) CTL is most prevalent in young women between the age of 20~30 years and the incidence of CTL in female is 2.5 times higher than that of male. It is located most commonly in the posterior cervical area. The most common presenting symptom is painless palpable enlarged cervical lymph nodes. 2) With FNA of enlarged cervical lymph nodes, the percentage of histopathological positivity is 82.3%. The percentage of AFB smear positivity is 38.6%, and that of TB culture positivity is 17.6%(p<0.001). 3) Pulmonary tuberculosis is noted in 79 cases(65.8%). And 42 cases(53.5%) of them had minimal pulmonary tuberculosis. In 14 cases(11.7%), other extrapulmonary tuberculosis coexsisted and pleural tuberculosis was most Common in the order. 4) CTL was treated with anti-tuberculous medication(first line drug) and median treatment duration was 18.5months. During treatment, the size of involved lymph nodes decreased gradually in 62 cases(75.8%), newly developed lymph nodes were found in 25 cases(30.4%), fluctuation formation in 22 cases(26.8%) and fistula formation in 14 cases(17.0%). Conclusion : CTL is prevalent in women between the age of 20~40 years and it involves posterior cervical area most commonly. CTL is treated with long-term anti-tuberculous chemotherapy. We think it is one manifestation of systemic disease and frequently coexisting with pulmonary tuberculosis. Despite anti-tuberculous chemotherapy, the size of involved lymph nodes was increased, new lymph nodes were developed or fluctuation and fistula formed in involved lymph nodes. After sufficient medication, when the patient felt pressure discomfort from enlarged lymph node or fistula was formed, we recommended total excision of involved lymph nodes.

• Journal of the Korean Vacuum Society
• /
• v.18 no.1
• /
• pp.66-72
• /
• 2009

The detection methods are required to monitor and diagnose the abnormality on the insulation condition inside a gas-insulated switchgear (GIS). Due to a good sensitivity to the products decomposed by partial discharges (PDs) in $SF_6$ gas, the development of a SWNT gas sensor is actively in progress. However, a few numerical studies on the diffusion mechanism of the $SF_6$ decomposition products by PD have been reported. In this study, we modeled $SF_6$ decomposition process in a chamber by calculating temperature, pressure and concentration of the decomposition products by using a commercial CFD program in conjunction with experimental data. It was assumed that the mass production rate and the generation temperature of the decomposition products were $5.04{\times}10^{-10}$ [g/s] and over 773 K respectively. To calculate the concentration equation, the Schmidt number was specified to get the diffusion coefficient functioned by viscosity and density of $SF_6$ gas instead rather than setting it directly. The results showed that the drive potential is governed mainly by the gradient of the decomposition concentration. A lower concentration of the decomposition products was observed as the sensors were placed more away from the discharge region. Also, the concentration increased by increasing the discharge time. By installing multiple sensors the location of PD is expected to be identified by monitoring the response time of the sensors, and the information should be very useful for the diagnosis and maintenance of GIS.

• Economic and Environmental Geology
• /
• v.54 no.1
• /
• pp.105-115
• /
• 2021

The geological CO2 sequestration in underground geological formation such as deep saline aquifers and depleted hydrocarbon reservoirs is one of the most promising options for reducing the atmospheric CO2 emissions. The process in geological CO2 sequestration involves injection of supercritical CO2 (scCO2) into porous media saturated with pore water and initiates CO2 flooding with immiscible displacement. The CO2 migration and distribution, and, consequently, the displacement efficiency is governed by the interaction of fluids. Especially, the viscous force and capillary force are controlled by geological formation conditions and injection conditions. This study aimed to estimate the effects of surfactant on interfacial tension between the immiscible fluids, scCO2 and porewater, under high pressure and high temperature conditions by using a pair of proxy fluids under standard conditions through pendant drop method. It also aimed to observe migration and distribution patterns of the immiscible fluids and estimate the effects of surfactant concentrations on the displacement efficiency of scCO2. Micromodel experiments were conducted by applying n-hexane and deionized water as proxy fluids for scCO2 and porewater. In order to quantitatively analyze the immiscible displacement phenomena by n-hexane injection in pore network, the images of migration and distribution pattern of the two fluids are acquired through a imaging system. The experimental results revealed that the addition of surfactants sharply reduces the interfacial tension between hexane and deionized water at low concentrations and approaches a constant value as the concentration increases. Also it was found that, by directly affecting the flow path of the flooding fluid at the pore scale in the porous medium, the surfactant showed the identical effect on the displacement efficiency of n-hexane at equilibrium state. The experimental observation results could provide important fundamental information on immiscible displacement of fluids in porous media and suggest the potential to improve the displacement efficiency of scCO2 by using surfactants.