• Interaction and multiscale mechanics
• /
• 제1권2호
• /
• pp.177-190
• /
• 2008

In this paper, both experimental measurement and theoretical analysis are used to investigate the out-of-plane resonant characteristics of a cantilevered piezoceramic plate in air and three different kinds of fluid. The experimental method, amplitude-fluctuation electronic speckle pattern interferometry (AF-ESPI), is the major technique used in this study to measure the resonant characteristics of the cantilivered piezoceramic plate. Both resonant frequencies and full-field mode shapes are obtained from this experimental technique. Numerical computations based on the finite element analysis are presented for comparison with the experimental results. Good quality of mode shapes for the cantilevered piezoceramic plate in air is obtained from the AF-ESPI technique. However, the quality decreases as the viscosity of fluids increases. From the results provided from experimental measurements and numerical computations, it is indicated that the resonant frequencies of the cantilevered piezoceramic plate in fluid decrease with the increase of the viscosity of fluids. Good agreements between the experimental measured data and the numerical calculated results are found for both resonant frequencies and mode shapes of the cantilevered piezoceramic plate in fluid.

• 한국산업융합학회 논문집
• /
• 제24권5호
• /
• pp.581-587
• /
• 2021

In recent years, contamination of drinking water sources has emerged as a serious social problem, such as a large number of impurities in tap water or groundwater or the supply of suitable water due to rust of pipes. Although the government and public institutions are implementing various measures to protect water sources, they cannot improve water quality in a short period of time because of the enormous cost involved. Therefore, in recent years, preference has been given to a device that converts tap water, which is hard water, into soft water by installing a separate water softener at the faucet from which tap water is discharged. However, the existing filtration device has a problem that filtration performance is gradually lowered when impurities accumulate in the filter, requiring continuous filter replacement. In this study, the optimal design of the filter housing was performed to develop a water softener that can be washed when impurities accumulate on the filter inside the water softener connected to the faucet. For optimal design of the filter housing, fluid and fluid-structural interaction analysis were performed on the design pressure to determine the shape and thickness of the housing, and design review was performed through prototype.

• 한국컴퓨터그래픽스학회논문지
• /
• 제25권4호
• /
• pp.1-8
• /
• 2019

본 논문에서는 젖은 헤어나 털에서 분사되는 액체의 디테일한 움직임을 표현할 수 있는 새로운 프레임워크를 제안한다. 젖은 헤어에서는 모발의 마찰력과 접착력 뿐만 아니라, 액체의 움직임도 마른 헤어에 비해 독특한 움직임을 갖는다. 하지만, 최근에 제안된 기법들도 모발의 접착력과 마찰력만을 고려했으며, 젖은 헤어에서 분사되는 액체의 움직임은 개선시키지 못했다. 이 문제는 헤어와 유체의 상호작용에서 표현되는 디테일한 특징을 잡아내지 못하기 때문에 결과의 품질을 저하시키는 원인이 된다. 본 논문의 주안점은 이 문제를 완화시켜 결과의 품질을 개선시키는 것이며, 결과적으로 FLIP(Fluid-implicit particle) 기반 유체 시뮬레이션과 헤어 입자 간의 상호작용을 효율적으로 표현할 수 있는 결합 프레임워크를 제안한다. 제안하는 방법은 이전 연구들에서 표현하지 못했던 곡선 형태로 분사되는 액체의 디테일한 움직임을 젖은 헤어 프레임워크에서 표현해냈다.

• 한국생산제조학회지
• /
• 제23권2호
• /
• pp.103-108
• /
• 2014

Growing concerns about environmental pollution have led to an increase in the demand for compressed natural gas (CNG) vehicles in recent years. CNG vehicles are equipped with a cylinder valve installed in a high-pressure vessel to control the CNG flow. The cylinder valve must meet high quality safety standards because the pressure vessel stores high-pressure CNG. Therefore, safety evaluation of the cylinder valve is necessary to ensure the safety of CNG vehicles. In this study, fluid-structure interaction analysis for the structural integrity of the cylinder valve were conducted using a commercial finite element analysis code(ANSYS WORKBENCH V14). The CFD analysis was performed using a steady-state technique according to the inlet and outlet pressures in order to predict the pressure distribution. Structural analysis was performed by a static structure technique at the maximum working pressure to evaluate the structural integrity of the cylinder valve. From the results, the safety factor of the valve component is between 1.57 and 21.5.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.21-24
• /
• 2008

The present study numerically investigates the glottal airflow characteristics as well as acoustic features of phonation fully coupled with dynamic behavior of vocal folds. The vocal folds are described by a low-dimensional body-covered model characterized by bio-mechanical parameters such as glottal width, vocal folds stiffness, and subglottal pressure. The flow in the vocal tract is modeled as an incompressible, axisymmetric form of the Navier-Stokes equations (INS), while the acoustic field is predicted by the linearized perturbed compressible equations (LPCE). The computed result shows that a two-mass model of vocal folds is sufficient to reproduce temporal variations in oral airflow and glottis motion produced by female speakers. It is also found that i) the glottal width has a significant effect on the amplitude of glottal flow, and thus on the amplitude of acoustic wave in the vocal tract, ii) the vocal fold tension is the main control parameter for the fundamental frequency of phonation, iii) the subglottal pressure plays an appreciable role on reproduction of the self-sustained oscillation of vocal folds, and iv) the strength of pulsating airflow and vortical structures are primarily affected by glottal width and subglottal pressure, and are closely related to pitch, loudness, and voice quality. Finally, more comprehensive explanation about the difference between one- and two-mass models is presented with discussion of effectiveness of vocal folds oscillation and voice quality.

• 한국콘텐츠학회논문지
• /
• 제8권4호
• /
• pp.17-29
• /
• 2008

컴퓨터 그래픽스에서 물을 애니메이션하거나 다양한 특수효과를 표현하기위해 유체역학의 기술들이 사용되고 있다. 하드웨어성능이 높아지면서 이전에 불가능했던 알고리즘들이 실시간으로 가능해지고 있기는 하지만, 정밀한 표현에는 여전히 많은 시간이 소요되며, 성능과 사실성 사이의 균형을 위한 다양한 기술들이 연구되고 있다. 특히 게임과 같은 문맥을 가지는 곳에서 사용자의 요구에 의해 바다나 호수 같은 넓은 지역의 물표면과 객체의 상호작용을 표현하기 위해서는, 물리적 사실성을 어느 정도 희생하더라도 시각적인 사실성을 유지하는 범위에서 실행 성능을 높이는 것이 우선시 된다. 본 논문에서는 물표면과 객체의 상호작용에 의한 다양한 물표면의 형태변화를 선형 컨벌루션 기법과 경계구를 이용하여 실시간으로 자연스럽게 애니메이션하는 방법을 제안한다.

• 한국농공학회논문집
• /
• 제60권3호
• /
• pp.27-36
• /
• 2018

Effective pesticide applications are needed to assure the quality and economic competitiveness of fruit production and lower the risk of spray drift. Experimental studies have shown that better spray coverage and less driftability require an understanding of the transport of spray droplets within turbulent airflows in the orchard and the interaction between droplet dynamics and tree canopies. This study developed a computational fluid dynamics (CFD) model to predict pesticide flows in the orchard and spray drift discharged from an air-assisted orchard sprayer. The model represented the transport of spray droplets as well as droplets captured by tree canopies, which were modeled as a conical porous model and branched tree model. Validation of the CFD model was accomplished by comparing the CFD results with field measurements. Spray depositions inside tree canopies and at off-target locations were in good agreement with the measurements. The resulting data presented that 38.6%~42.3% of the sprayed droplets were delivered to the tree canopies while 13.6%~20.1% were drifted out of the orchard, part of them reached farther than 200 m from the orchard. The study demonstrates that CFD model can be used to evaluate spray application performance and spray drift potential.

• 한국컴퓨터그래픽스학회논문지
• /
• 제21권5호
• /
• pp.21-27
• /
• 2015

본 논문에서는 방송국 그린 스튜디오에 서 있는 연기자와 CG로 표현되는 스페셜 이펙트(물, 불, 연기 등)와의 상호작용을 제공하는 시스템을 제안한다. 기존의 가상 스튜디오는 주로 CG 배경과 연기자 촬영 영상을 정합하는 방법에 초점을 맞추고 있다. 기존의 연구와 달리 본 논문에서는 실제 연기자와 상호작용하는 비주얼 이펙트를 시뮬레이션하는데 집중함으로써 TV 화면에서 새로운 영역을 표현하고자 한다. 연기자 동작에 비주얼 이펙트를 연동하기 위하여 깊이 카메라를 이용하여 연기자 동작을 추출한다. 이를 3차원 벡터 필드로 변환하고 Navier Stokes 방정식의 외력으로 적용하여 물, 불, 연기의 유체를 시뮬레이션한다. 특히, 물의 상호작용을 사실적으로 표현하기 위하여 물에 연동되는 스플레쉬의 상호작용도 함께 시뮬레이션하여 물이 등장하는 비주얼 이펙트의 사실감을 극대화시켰다. TV의 실시간 녹화를 지원하기 위하여 GPU 프로그래밍을 도입하여 VFX의 실시간 상호작용을 지원하는 기능도 추가하였다. 제안된 방법의 유용성은 물, 불, 연기, 바다 속 물고기 떼 등의 VFX 시뮬레이션과 연기자와의 상호작용 실험을 통하여 확인할 수 있었다.

• 한국유체기계학회 논문집
• /
• 제7권1호
• /
• pp.17-23
• /
• 2004

Aeroacoustic characteristics of sirocco fan used in Over-The-Range (OTR) has been analyzed in this paper. A microwave hood combination over the gas range is short for the OTR. The flow phenomena of the double-sided sirocco fan was analyzed numerically and experimentally by using commercial code and three dimensional PIV for flow visualization. Also, microphone array is used in order to understand acoustic characteristics of OTR. Two dimensional unsteady flow and acoustic simulation is tried to qualitatively estimate the effects of tonal noise and broadband noise on the overall sound pressure level. It is found that tonal sound is generated from the strong interaction between the impeller and cutoff while broadband sound is generated from the strong secondary flows along the scroll surface. To reduce the noise level, the V-shape cut-off was applied to improve the sound quality by reducing tonal noise. So the peak noise at BPF (Blade Passing Frequency) was almost reduced. The shape of flow-guide to suppress the secondary flow over the scroll surface was carefully checked. It is found that this affects flow pattern at the fan exit and reduces the broad band noise. Through this numerical and experimental study, the sound pressure level was lowered by 4dBA compared to that of the previous fan at the operating point.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2007년도 추계 종합학술대회 논문집
• /
• pp.708-712
• /
• 2007

CG에서 물을 애니메이션하거나 다양한 특수효과를 표현하기위해 유체역학의 기술들이 사용되고 있다. H/W 성능이 높아지면서 이전에 불가능했던 알고리즘들이 실시간으로 가능해지고 있기는 하지만, 정밀한 표현에는 여전히 많은 시간이 소요되며, 성능과 사실성 사이의 균형을 위한 다양한 기술들이 연구되고 있다. 특히 게임과 같은 문맥을 가지는 곳에서 사용자의 요구에 의해 바다나 호수같은 넓은 지역의 물표면과 객체의 상호작용을 표현하기위해서는, 물리적 사실성을 어느 정도 희생하더라도 시각적인 사실성을 유지하는 범위에서 실행성능을 높이는 것이 우선시 된다. 본 논문에서는 물표면과 객체의 상호작용에 의한 다양한 물표면의 형태변화를 선형 컨벌루션 기법과 경계구를 이용하여 실시간으로 자연스럽게 애니메이션하는 방법을 제안한다.