• 문화기술의 융합
• /
• 제10권2호
• /
• pp.531-536
• /
• 2024

최근 농업분야의 스마트 농기계로 분류되고 있는 방제드론은 농촌지역의 고령화 시대를 맞이하여 작업 시간 단축과 방제효과를 높이기 위해 하드웨어 및 소프트웨어를 결합하여 스마트 방제 및 자동방제 시스템 구축을 위해 노력하고 있다. 본 논문에서는 관리관제 및 자동방제 시스템 구축을 위한 기초연구로 방제드론 전용노즐의 특성을 분석하였다. 다양한 드론 모델의 종류, 방제사, 바람, 비행속도, 비행고도, 날씨 조건, UAV 농약 종류 등 다양한 변수를 고려하기 위해서는 노즐의 특성파악과 범용성을 고려하여 약제살포 기준 제시가 가능한 관련 연구가 필요하다. 따라서 다양한 변수 고려가 가능하도록 자체 설계노즐을 기반으로 유동해석(CFD) 시뮬레이션을 실시하고 감수지 실험을 통하여 액적분포의 이론값과 실험값을 비교 분석하였다. 추후 드론운용에 따른 다양한 변수를 고려하여 정확한 비산을 산출하고 관리관제 및 자동방제 시스템에 활용하고자 한다.

• Water Engineering Research
• /
• 제2권2호
• /
• pp.123-138
• /
• 2001

An injection experiment was carried ut to investigate the pressure domain within which hydromechanical coupling influences considerably the hydrologic behavior of a granite rock mass. The resulting database is used for testing a numerical model dedicated to the analysis of such hydromechanical interactions. These measurements were performed in an open hole section, isolated from shallower zones by a packer set at a depth of 275 m and extending down to 840 m. They consisted in a series of flow meter injection tests, at increasing injection rates. Field results showed that conductive fractures from a dynamic and interdependent network, that individual fracture zones could not be adequately modeled as independent systems, that new fluid intakes zones appeared when pore pressure exceeded the minimum principal stress magnitude in that well, and that pore pressures much larger than this minimum stress could be further supported by the circulated fractures. These characteristics give rise to the question of the influence of the morphology of the natural fracture network in a rock mass under anisotropic stress conditions on the effects of hydromechanical couplings.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제19권2호
• /
• pp.191-199
• /
• 1997

Mandibular trauma is developed due to traffic accident, fall down, industrial injury, and others. TMJ disorder is usually also developed after facial traumatic injury. Many authors suggested that disc displacement or tearing, acute synovitis, TMJ ankylosis, traumatic arthritis, or effusion are developed after facial trauma. It is still very controversible what is the best treatment of TMJ injury such as condylar fracture and meniscal injury. In TMJ injury, synovial inflammation is developed and pain mediators such as prostaglandin E2 or leukotriene B4 are released from the synovial membrane. This can be a cause of TMJ disorder. I present a variety of experimental study about the condylar fracture and meniscal injury and enzyme-immunoassay of synovial fluid after mandibular trauma that have been studied since 1992 and establish the treatment criteria of traumatic TMJ injury. I think that the treatment option of condylar fracture depends upon the surgeon's criteria exclusively. There are no significant differences between conservative and surgical treatment. If the aggressive functional physical therapy and long-term followup be performed, the favorable functional recovery of TMJ can be obtained. And I think that the initial surgical management of meniscus of TMJ is unnecessary in condylar fracture. And also arthrocentesis can be available to release the patient's subjective symptoms and improve the healing of injured TMJ.

• 드라이브 ㆍ 컨트롤
• /
• 제17권2호
• /
• pp.38-44
• /
• 2020

Various efforts have been initiated to reduce the energy consumption of the compressor as it is one of the approaches to saving a large portion of the fixed cost of the production site. Various results of reducing the energy consumption of the compressor have been reported, but to reduce the energy consumption of the compressors fundamentally, regular management of the compressor should ensure optimum operation. This requires periodic on-site visits by experts, but is often overlooked as a cost issue, resulting in the use of the compressor in low-efficiency conditions. Thus, it is necessary to develop a low-cost evaluation technology for compressor condition monitoring and efficiency analysis to ensure that the compressor is always driven at the optimum efficiency without imposing undue burden on the compressor user. In this study, a sensor was installed at the inlet, outlet, and power supply of the compressor, and a method for evaluating the energy consumption of the compressor using the minimum sensor was derived. The experimental results are presented to show the validity of the proposed method. It was confirmed that the energy consumption of the compressor can be easily as well as efficiently evaluated by using the method developed in this study.

• 상하수도학회지
• /
• 제18권4호
• /
• pp.437-444
• /
• 2004

To control algal bloom in reservoirs in Korea, artificial circulation systems have been applied. Diffuser block aeration systems have been increasingly used in Korean reservoirs especially for shallow ones. However, there has been no sound theoretical background for the design and operation of the system. Also there has not been sufficient post-installation studies to validate the effectiveness of the system. As a result, it has been repeatedly reported that the success of the system is not certain. Proper consideration on thermal stratification regimes of reservoirs and flow dynamics induced by bubble plumes are essential elements in design processes of the aeration system. This paper discusses the current methods in the design of diffuser type aeration system and suggests a new design method based on fluid mechanical theory. Example calculations were discussed using observed data of the Yeoncho Dam and it seems that the results represent the current situation successfully.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권3호
• /
• pp.385-392
• /
• 2018

This paper presents 2D numerical modeling to calculate ship-ice interactions that occur when an icebreaker advances into ice-covered water. The numerical model calculates repeated icebreaking of an ice plate and removal of small ice floes. The icebreaking of the ice plate is calculated using a ship-ice contact detection technique and fluid-structural interaction of ice plate bending behavior. The ship-ice interactions in small ice floes are calculated using a physically based modeling with 3DOF rigid body equations. The ice plate is broken in crushing, bending, and splitting mode. The ice floes drift by wind or current and by the force induced by the ship-ice interaction. The time history of ice force and ice floe distribution when an icebreaker advances into the ice-covered water are obtained numerically. Numerical results demonstrate that the time history of ice force and distribution of ice floes (ice channel width) depend on the ice floe size, ship motion and ice drifting by wind or current. It is shown that the numerical model of ship maneuvering in realistic ice conditions is necessary to obtain precise information about the ship in ice-covered water. The proposed numerical model can be useful to provide data of a ship operating in ice-covered water.

• 대한기계학회논문집B
• /
• 제30권7호
• /
• pp.707-714
• /
• 2006

A numerical analysis study has performed in terms of fluid dynamics to identify the wall thinning generated in the main feedwater isolation valve body of a nuclear power plant. To review the relations between flow characteristics and the wall thinning induced by flow accelerated corrosion (FAC), numerical analysis using FLUENT code and ultrasonic tests (UT) were performed. The local velocities according to the analysis results were compared with the distribution of the measured wall thickness by ultrasonic tests. The comparison results show that the local velocity in the x-direction had no correlation with the wall thinning but the local velocity in the y-direction and turbulence intensity had a great influence on that. These results provide a good match to those of the previous studies - locations colliding vertically against components undergo severe wall thinning. These results may be utilized to the design modification and the wall thinning management for main feedwater isolation valves for preventing the wall thinning degradation.

• 대한한방부인과학회지
• /
• 제20권4호
• /
• pp.175-190
• /
• 2007

Purpose: Ovarian cysts are fluid-filled sacs or pockets within or on the surface of an ovary. Most cysts present little or no discomfort and are noncancerous and harmless. So non-surgical treatments with herbal medicine or acupuncture and moxa therapy are important and suitable in this pathology. But there are few RCT articles about ovarian cyst in Korean Medicine(KM) clinical and research field. Methods: To review treatment method and other research tendency about ovarian cyst in journals related with KM and Traditional Chinese Medicine(TCM) through web-searching. Searching was done through web site #http://omis.ksucc.ac.kr# and pub-med(http://www.ncbi.nlm.nih.gov/sites/entrez) with key words #ovarian cyst#, #TCM#, #herb#, #CAM#, and #acupuncture#. Results: Seven articles were searched in journals related with KM, then six of them were simple case report and the other one was about diagnosis for ovarian cyst and another gynecologic disease such as uterine myoma and infertility through the iris diagnosis. And two articles were searched in journals related with TCM, then one of them was simple case report but the other is RCT article. Conclusion: KM and TCM therapies have some beneficial effect to resolve cyst, but objective power as a evidence is weak in the viewpoint of EBM. So continuous clinical trials such as RCT and multi center trials are needed.

• 대한치과의사협회지
• /
• 제58권10호
• /
• pp.615-626
• /
• 2020

The outbreak of COVID-19, caused by SARS-CoV-2 infection, has spread worldwide and resulted in a pandemic for health systems. The disease is transmitted via respiration as droplets or aerosol. Due to the nature of dental treatment, aerosols, including body fluid, blood, and saliva, are frequently produced in dental hospitals. The present study investigated the potential risk of nosocomial infection of COVID-19 in dental hospitals to provide recommendations in clinical situations. The Seoul National University Dental Hospital in Korea established a countermeasure to cope with the clinical situation based on The Guidelines of Korean Centers for Disease Control & Prevention (KCDC) for dental practitioners and the available literature. Notably, numerous considerations for patient reservation and schedule management are required for space separation in the hospital, including infection control. Experiences in dental hospitals in Korea would be referable for other dental hospitals facing this infectious respiratory disease.

• 한국실내디자인학회논문집
• /
• 제15권5호
• /
• pp.28-35
• /
• 2006

During the modern age, various fields have fundamentally changed from the preconceived ideas of the past. The concept of time-space relationship changed also. E. J. Marey was almost the first one to visualize the movement of animals and people through scientific methods. Frank B. Gilbreth used more precise photographic equipments to develop more accurate and specific body movement diagrams. The emergence of visualization of body movement is not the only product from the scientific field. The new concept of time-space can be easily noticed in modem art, music and dance. In space design, Futurism attempted to represent the dynamism and speed in a sculptural form. On the other hand, there were examples to further investigate the specific analysis of body movements such as 'Scientific Management'. Body movement diagrams are widely used in various projects in contemporary space design. The difference is that now the design process is more integrated with the analysis. The representation of speed and the container of movements are interwoven in a complex manner in which fluid relationship between body and space is possible. Three types can now be considered: Object, Container and Interactivity. This study attempts to analyze brief history of body movement studies and their application for contemporary space design.