• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.329-334
• /
• 2009

An oxy-fuel boiler has been developed to capture $CO_2$ from the exhaust gas. FGR (flue gas recirculation) is adopted to be compliant with the retrofit scenario. Numerical simulations have been performed to study the detailed physics inside the combustion chamber of the boiler. The temperature field obtained from the simulation agrees with the flame image from the experiment. The FGR combustion yields similar heat transfer characteristics with the conventional air combustion while the flame is formed further downstream in case of the FGR combustion.

• 한국연소학회지
• /
• 제8권1호
• /
• pp.17-24
• /
• 2003

The conventional regenerative system has a high thermal efficiency as well as energy saving using the high preheated combustion air. in spite of these advantages, it can not avoid high nitric oxide emissions. Recently, flameless combustion has received much attention to solve these problems. In this research, numerical analysis is performed for flow-combustion phenomena in the self regenerative burner. In this analysis we used Fluent 6.0 code. the that is developed for commercial use, Methane gas is used as a fuel and two-step reaction model for methane and Zeldovich mechanism for NO generation are used. the velocity of the preheated combustion air is used as a parameter and we analyze the characteristics of flow-field, temperature distributions and NO emissions. Due to the increased recirculation rate, the maximum temperature of flame is significantly increased and NOx emissions is reduced.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.97-104
• /
• 2002

The conventional regenerative system has a high thermal efficiency as well as energy saving using the high preheated combustion air. in spite of these advantages, it can not avoid high nitric oxide emissions. Recently, flameless combustion has received much attention to solve these problems. In this research, numerical analysis is performed for flow-combustion phenomena in the self regenerative burner. In this analysis we used Fluent 6.0 code. the that is developed for commercial use, Methane gas is used as a fuel and two-step reaction model for methane and Zeldovich mechanism for NO generation are used. the velocity of the preheated combustion air is used as a parameter and we analyze the characteristics of flow-field, temperature distributions and NO emissions. Due to the increased recirculation rate, the maximum temperature of flame is significantly increased and NOx emissions is reduced

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1812-1814
• /
• 1998

Recently plasmas have been used to reduce the undesirable gases $SO_2$, NO, and $NO_2$. Especially bidirectional pulsed voltages were used to increase the efficiency of flue-gas reactors. The particle-Mesh model using NGP (Nearest-grid-point) and FEM (Finite Element Method) calculate the detailed space-time variations of the electric fields for the streamer and it makes the characteristics of reactor more clearly. In this simulation NO is considered a dominant gas.

• 대한설비공학회지:설비저널
• /
• 제7권4호
• /
• pp.227-238
• /
• 1978

Draft of the conbustion gab burning in a briquette gives a great part of driving force to the flue gas in an Korean conventional ondol heating system. The Paper present s how the draft intensity varies for each whole Combustion duration. In this experiment the temperatures of thirty spots In three gas courses of a briquette were measured and the drafts were calculated form those experimental data. The result is that the shorter the combustion duration of a briquette is, the stronger the draft becomes, the intensity of drafts ranging between 0.15mm Aq to 0.26mm Aq.

• 한국연소학회지
• /
• 제15권1호
• /
• pp.43-49
• /
• 2010

Co-combustion of syngas in an existing boiler can be one of the options for replacing conventional fossil fuel with alternative fuels such as waste and biomass. This study is aimed to investigate effects of syngas cocombustion on combustion characteristics and boiler efficiency. An experimental study was performed for a pilot-scale furnace with 4 oil burners. Tests were conducted with mixture-gas as a co-combustion fuel and heavy oil as a main fuel. The mixture-gas was composed of 15% CO, 7% $H_2$, 3% $CH_4$ and 75% $N_2$ for simulating syngas from air-blown gasification. And LHV of the mixture-gas was 890 kcal/$Nm^3$. Temperature distribution in the furnace and flue gas composition were measured for various heat replacement ratio by the mixture gas. Heat loss through the wall was also carried out through heat & mass balance calculation, in order to obtain informations related to boiler efficiency. Experimental results show that similar temperature distribution and flue gas composition can be obtained for the range of 0~20% heat replacement by syngas. NOx concentration is slightly decreased for higher heat replacement by the syngas because fuel NOx is decreased in the case. Meanwhile, heat loss is a bit decreased for higher heat replacement by the syngas, which implies that boiler efficiency can be a bit decreased when syngas co-combustion is applied to a boiler.

• 한국입자에어로졸학회지
• /
• 제18권4호
• /
• pp.97-107
• /
• 2022

The geometry of popular wave plate type mist eliminator for the wet flue gas desulfurization process was improved, fabricated, and experimentally evaluated. A Mist eliminator is a type of inertial particle collector which collection efficiency is proportional to the velocity of the gas phase. However, as the amount of re-entrainment is also proportional to the gas phase velocity, there is a limitation for the gas phase flow rate. Re-entrainment is one of the most important issues in a mist eliminator and is likely to occur as the input of the liquid phase and flow rate of the gas phase increase. In order to resolve this problem, the projection angle of the improved mist eliminator is set to 30° from the conventional one while maintaining the cross-section. With low flow rate conditions, the modified mist eliminator showed a similar pressure drop and overall collection efficiency. However, with conditions in which re-entrainment is obviously occurring, the modified mist eliminator showed better performance in draining droplets than the conventional one. As a result, the modified mist eliminator showed higher overall collection efficiency.

• 에너지공학
• /
• 제6권2호
• /
• pp.203-211
• /
• 1997

본 연구에서는 지구 온난화 연소폐가스를 모델로 한 $CO_2$-$N_2$혼합 기체의 화학흡수법에 의한 기체 분리 실험을 행하였다. 반회분식 기포부상 반응 장치를 이용하여 최적흡수액의 조건을 탐색하였고, 충진 흡수탑을 이용하여 흡수 속도를 측정, 실험 결과를 이론적 예측값과 비교.분석하여 흡수현상에 대한 적절한 해석을 하고자 하였다. 본 실험에 사용한 흡수제는 Monoethanolamine(MEA)이었고, 대상 기체는 화력발전소의 연소배가스의 주요성분이 $N_2$79%, $CO_2$15%, $O_2$4%인바, $N_2$: $CO_2$가 몰비 85:15의 비율인 모델가스를 혼합기체로 사용하였다. 실험조건하에서 $CO_2$loading과 $CO_2$제거율을 측정하였고, 흡수속도를 구하기 위하여 Enhancement factor를 도입하고 Film 모델과 Higbie 모델을 적용하였다. 흡수액의 최적농도는 4-5 M인 것으로 나타났으며. Higbie model에 의한 흡수속도 예측은 실측치와 잘 일치하여 연소폐가스 중의 고농도 $CO_2$가스의 흡수에 적용이 가능한 것으로 나타났다.

• 한국산학기술학회논문지
• /
• 제10권11호
• /
• pp.3246-3252
• /
• 2009

최근 들어 지속적인 폐기물 발생량의 증가와 화석 연료 고갈 문제를 해결하기 위해 폐기물을 이용한 열에너지 회수에 대한 관심이 증가 하고 있다. 에너지 회수를 위한 폐기물 처리공정으로 소각이 가장 많이 이용되고 있으나 소각 시 발생되는 대기오염물질을 처리하기 위한 공정 설계 및 설치비용이 많이 소요된다. 본 연구에서는 화학공정을 모사하는 software인 Aspen plus를 이용하여 실제 산업폐기물 소각로와 배가스처리 공정을 모사해 보았다. 소각공정은 폐기물 연소를 위한 1차 연소와 2차 연소, urea를 이용하여 $NO_x$를 환원시키는 SNCR공정과 연소시 발생하는 에너지 회수를 위한 스팀 생산 공정으로 구성되어 있다. 연소시 발생하는 산성가스(HCl, $SO_2$)를 제거하기 위하여 슬러리 상태의 $Ca(OH)_2$를 주입하였으며 산성가스 중화시 생성되는 부산물과 ash는 bag filter에서 제거하는 것으로 모사 하였다. 모사결과는 실제 산업폐기물 소각로의 배가스 처리 효율과 비교적 잘 일치하였으며 또한 장래 배가스 처리 시스템의 효율을 예측하는데도 이용될 수 있을 것으로 판단된다.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 1992년도 제15회 대기보전학술연구발표회 요지집
• /
• pp.101-106
• /
• 1992