• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1993년도 추계학술대회발표논문집; 서강대학교, 서울; 25 Sep. 1993
• /
• pp.185-190
• /
• 1993

In this paper, we investigate the effect of production uncertainty - especially demand fluctuation and activity time variation, to production control policies. First, we examine three famous production control policies, namely, MRP, JIT, OPT, from shop floor control perspective and analyze the difference among them. Based on these, simulation studies are performed to draw out the effects of demand fluctuation which are classified into demand lumpiness and demand irregularity, and, the effects of activity time variation which are classified into standard time variation and non-standard time variation. Experimental investigation shows that, in terms of demand fluctuations, MRP is affected by demand lumpiness, but JIT by demand irregularity. And we also see that both MRP and JIT are influenced by standard time variation with respect to activity time variations.

• 한국해양공학회지
• /
• 제16권3호
• /
• pp.46-53
• /
• 2002

In the study, the interaction characteristics among incident waves, run-up and internal waterlevel at core layer of breakwaters were investigated. The effect of core materials on the internal waterlevel characteristics are also discussed using the results with both regular and irregular wave tests. The main results obtained are as follows; The higher internal waterleve was observed under the permeable breakwater with core layer of the lower permeability than with the higher one. And, the internal waterlevl decreased as far as the distance from the toe. In the irregular wave test, the grouping characteristics of incident waves make large fluctuation of the waterlevel. Especially, breakwaters internal waterlevel appeared to affect the hydraulic characteristics on slope.

• 한국연소학회지
• /
• 제10권2호
• /
• pp.35-41
• /
• 2005

Behaviors of lean premixed flame of propane/air and methane/air flame anchored by a pilot flame in a tube were investigated experimentally varying the mean velocity from 10 to 140 cm/s and the equivalence ratio from 0.45 to 0.8. Behaviors of both flames are divided into five regions of stable, flash-back, tail-out, flickering and vibrating. General characteristics of each region and Le number effect are investigated. Two main instabilities, flickering and vibration, are both unstable but the instability mechanism, the frequency and the amplitude of pressure fluctuation are different. In the edge of the vibrating region, pressure fluctuation repeats generation and extinction. Repeated growth and decrease of the amplitude of pressure fluctuation are explained by Rayleigh#s index.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권2호
• /
• pp.80-85
• /
• 2004

This paper reports the performance of a CB (Circuit Breaker) and converter for the battery operated Wind-PV (Photovoltaic) system. For this purpose, a fluctuating reduction controller for an electric generation hybrid (wind+PV) system is suggested. The method operates a wind turbine, PV, CB, converter and battery. Integration of wind and PV sources, which are generally complementary, usually reduce the capacity of the battery. Also, CB controls the overvoltage of the generation system. The objective is to control the operation of the converter and the CB and reduce power fluctuation. This paper includes discussion on system performance, power quality, fluctuation and effect of the randomness of the wind.

• 통상정보연구
• /
• 제8권4호
• /
• pp.159-175
• /
• 2006

This paper that explain exchange rate determination using Korea's economy data moment investigate whether each theory cause effect that is some on exchange rate showdown analyzing actual proof relation between foreign exchange fluctuation and financing part variance examine wish to. Because korea economic enters in the 1990s and the 2000s and the change is notable, foreign exchange fluctuation by such change is real condition that is changing. In this paper, I wish to enforce actual proof analysis if change such as him is grasped by form that is some about foreign exchange fluctuation. First, the second chapter investigates exchange rate decision theory that is used on actual proof interpretation, and executes actual proof Test in reply in subsequent the third chapter. And finally, the fourth chapter wishes to drive conclusion of this paper.

• 설비공학논문집
• /
• 제14권5호
• /
• pp.408-414
• /
• 2002

The instability of two-phase loop thermosyphons (TLTs) was investigated experimentally. Three orifice type inserts were used to study the effect of change in the pressure drop in the flow channel of the TLT on the flow instability and temperature fluctuation. It is observed that a decrease in the size of the orifice insert from 3.7mm (no insert) to 0.71mm drastically reduced the fluctuation of the temperature, especially at the evaporator section of the TLT With the orifice type insert of 0.71 mm for the TLT, the overall temperature fluctuation was almost completely eliminated, especially at higher power input to the TLT.

• 한국전기전자재료학회논문지
• /
• 제21권3호
• /
• pp.272-278
• /
• 2008

This paper investigated the a-si:H gate driver with the stepwise gate signal. In 1-chip type mobile LCD application the stepwise gate signal for low power consumption can be used by adding simple switching circuit. The power consumption of the a-Si:H gate driver can be decreased by employing the stepwise gate signal in the conventional circuit. In conventional one, the effect of stepwise gate signal can decrease slew rate and increase the fluctuation of gate-off state voltage, In order to increase the slew rate and decrease the gate off state fluctuation, we proposed a new a-Si:H TFT gate driver circuit. The simulation data of the new circuit show that the slew rate and the gate-off state fluctuation are improved, so the circuit can work reliably.

• 대한기계학회논문집B
• /
• 제31권2호
• /
• pp.202-207
• /
• 2007

In order to understand the phenomena of combustion instability, an experimental study was conducted at the moderate pressure and ambient temperature conditions. The flame behavior and the pressure fluctuations were measured in a dump combustor. Various types of combustion modes occurred in accordance with the equivalence ratio and the fuel supplying conditions. The fluctuation of pressure, heat release and equivalence ratio were measured by piezoelectric pressure sensor, high speed Intensified Charge Coupled Device (HICCD) camera and gas chromatography respectively. Two representative modes were self-excited pressure oscillations at the resonance of combustion chamber (200Hz) and instabilities related to the modulated fuel flow rate through the fuel holes (10Hz). It is found that, especially in an unchoked fuel flow condition, the modulation of the fuel flow rate affects the characteristics of flame behavior and pressure fluctuations in a lean premixed flame.

• 태양에너지
• /
• 제19권4호
• /
• pp.63-69
• /
• 1999

The conventional grid connected PV(Photovoltaic) system has a unstable output pattern due to its dependence on the weather condition, although solar-cell array averagely has a regular output characteristics to have a peak output nearly at noon. Therefore assuming the high density grid connection in the future, this unstable output pattern can be one of the main reasons to generate power disturbance such as voltage variation, frequency variation and harmonic voltage generation in low voltage distribution line. However general grid connected solar-cell system do not have functions to cope with these disturbances. Therefore this study proposed a advanced type grid connected PV system with functions to suppress output power fluctuation due to solar-cell array output variation and showed the levelling effect of fluctuation due to instantaneous array output variation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 추계학술대회 논문집
• /
• pp.206-207
• /
• 2016

The intermittent characteristics of wind power (WP) may have negative effect on grid stability, especially in weak grid. WP fluctuation rate can be reduced by using energy storage system (ESS) through charging and discharging. The operation of ESS will decide its losses and lifetime of batteries. From this point, this paper proposes WP smoothing control by using short-term average of WP. In this case, the ESS will only operate at high WP fluctuation rate. Then, the output power of ESS will be estimated by short-term average value. The effectiveness of proposed method will be verified by comparing with conventional method. The simulation results will be carried out by using Matlab program.