• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2009년도 춘계학술대회
• /
• pp.131-134
• /
• 2009

본 연구는 가공방법이 다른 투습발수직물의 마찰 속도별 직물마찰음의 소리특성과 주관적 평가간의 관계를 분석하는 것을 목적으로 한다. 스포츠웨어용 투습발수직물 중 가공방법이 다른 4 종(PU 건식코팅, PU습식코팅, 시레가공, 라미네이팅)의 나일론 100% 시료를 대상으로 실험하였다. 마찰속도의 상세 설정이 가능한 직물소리 시뮬레이터 v. 4.0으로 제어가 되는 직물마찰음 발생장치를 사용하여 직물마찰음을 발생시켜 녹음하였다. 직물의 마찰 속도는 동작(walking, jogging, running)시 팔과 몸통 사이의 마찰속도를 분석하여 이 속도에 따라 직물마찰음을 발생시켰고, Sound quality system으로 7 가지(SPL, ${\triangle}L$, ${\triangle}f$, Loudness(Z), Sharpness(Z), Roughness(Z). Fluctuation Strength(Z)) 소리특성을 분석하였다. 주관적 평가는 9 개의 형용사 쌍에 대해 의미미분척도로 평가되었다. 소리특성 분석 결과, 속도별 소리특성은 가공방법에 따른 차이 없이 walking 시가 가장 덜 시끄러운 소리가 발생하였고, 가공방법에 따라서는 마찰속도에 따라 약간 차이가 있지만 라미네이팅가공을 한 시료가 가장 날카로운 소리를 발생시켰다. 주관적 평가 결과, '거슬리는'과 '불쾌한'의 감성에 대해서는 walking, jogging, running의 순서로, 시레가공, 라미네이팅, PU건식코팅, PU 습식코팅의 순서로 증가하였다.

• 수산해양기술연구
• /
• 제34권2호
• /
• pp.105-116
• /
• 1998

This paper, examines the relationship between water temperatures and fishing conditions of common squid by the squid angling fishery from June to September in 1993-1995. The condition of the common squid fishing largely depended on the fluctuation of water temperature in the coastal area of Gampo. Monthly mean water temperatures during June m September in 1993 and 1994 were relatively higher than those in 1995 in Gampo area. But the values between July and August in 1995 were about 5$^{\circ}C$ lower than those in 1993 and 1995. Coefficients of variation (CV) of water temperature showed the lowest value during July ~ September in 1993, however, the highest value was observed in July and August in 1994. Catch per unit effort (CPUE ; kg/angling) showed a peak with 73.7kg in 1993 when the CV was low. On the other hand, the lowest CPUE of 39.6kg was observed in 1994 when the CV was high. It was concluded that the high stability of water temperatures and the weak strength of cold water have caused the good fishing conditions of common squid.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.426-432
• /
• 2004

Large-Eddy Simulation (LES) is applied for the simulation of compressible flat plate boundary with Reynolds number up to 5 X 10$^{5}$ . Numerical examples include shock/boundary layer interaction and boundary layer transition, aiming future application to the analysis of transonic fan/compressor cascades. The present LES code uses hybrid com-pact/WENO scheme for the spatial discretization and compact diagonalized implicit scheme for the time integration. The present code successfully predicted the bypass transition of subsonic boundary layer. As for supersonic turbulent boundary layer, mean and fluctuation velocity of the attached boundary, as well as the evolution of the friction coefficient and the displacement thickness both upstream and downstream of the separation region are all in good agreement with experiment. The separation point also agreed with the experiment. In the simulation of the shock/laminar boundary layer interaction, the dependence of the transition upon the shock strength is reproduced qualitatively, but the extent of the separation region is overpredicted. These numerical examples show that LES can predict the behavior of boundary layer including transition and shock interaction, which are hardly managed by the conventional Reynolds-averaged Navier-Stokes approach, although there needs to be more effort before achieving quantitative agreement.

• 한국해양공학회지
• /
• 제19권5호
• /
• pp.34-42
• /
• 2005

The cable connection zone of the cable-stayed bridge transfers deal-load, live-load, and second-load to the cables on the structural joint zone of the cables and the main girders are the most critical parts in which big cable tensile forces are generated by those loads. Therefore, it is necessary to thoroughly check the main girder, structurally to secure the required stability. Because of the heavy tensile force of cables linked in the connection zone of the cable-stayed bridge, locally concentrated stress, as well as the dispersion of stress, occurs in the structurally contacted point of cable and main girder thus, we need to make a thorough investigation through a detailed structural analysis. Directly delivering the tensile force to the connection zone of the cable, the consequently big effect in the tensile force fluctuation caused by the live-load will make it necessary to review the fatigue strength. As the connection zone of the cable is designed to resist the tensile force of the cable, which is applied to a connecting section as a concentrated force, thick plates are used. These plates are frequently made of welded structure, thus, the investigation of the welding workability is inevitable.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.814-819
• /
• 2004

When we evaluate sound, there are various methods for noise such as A-weighted SPL(sound pressure level), NC(noise criteria), NR(noise rating) and SIL(speech interference level) etc. however, it is not sufficient for the sounds supplied to public places used in soundscape design. Consequently it is needed to develop the tool for evaluating the good acoustical environment and futhermore quantifying the effect of improvement by supplying sound sources. In this study, it was tried to analyse the sound sources applied for soundscape design using sound quality parameters. The sound sources used were natural sound artificial sound. For the sound quality parameters, Loudness(L), Sharpness(S), Fluctuation strength(FL), Tonality(T), Roughness(R), Unbiased Annoyance(UA) were used and sound quality values were compared both natural and artificial sounds, depending on the convolution of sound sources with background noise, the duration, the frequency contents and the SPL. As a result, the values of L and UA have shown to be changed comparing to the other parameters, and it is necessary to analyse the correlation with subjects' responses.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.439-442
• /
• 2005

Generally, noise from a home appliance has been measured by overall sound pressure level or sound power level, dB. Customers evaluation, however, of this noise should be depend on the only overall level but also the sensory feeling, annoyance, unpleasure and so on. Moreover, in this sensory evaluation, irregular, time-varying and uneven sounds which are difficult to describe itself by overall level are more affectable. Unfortunately however the formal evaluation method for this kinds of noise is not determined yet. In this research, the evaluation method for harmonic noise, which is a major noise from home appliance and one of the unmeasurable sounds by overall level, is proposed to evaluate its acceptability based on the consumer's sense of hearing. The proposed approach could be applied to the other sound, which acoustical characteristics are similar to the tonal noise.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.826-829
• /
• 2005

The State of the art of low noise fan design requires the consideration of optimal sound quality. The influential design parameters of the noise level by the centrifugal fan were selected that based on a preliminary test. The centrifugal fans were designed according from the experiment plan method by specify the selected design parameters. The experiments with the machined mock-up's of centrifugal impellers revealed the major design parameters having impacts upon the indices of sound quality (e.g. loudness, sharpness, roughness and fluctuation strength) at the same performance condition. With a response surface method. the major design parameters selected were analyzed to estimate their contributions upon the sound quality of the centrifugal fan and the optimal values were drawn for the consideration of the sound quality by using each level and its regression equation. In addition, the validity of the regression equations were numerically verified by means of the coefficient of determination. Furthermore, the mechanism of how the centrifugal fans influence the determinants of sound quality was suggested.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권10호
• /
• pp.3534-3553
• /
• 2021

The low cost of Bluetooth technology has led to its wide usage in indoor positioning. However, some inherent shortcomings of Bluetooth technology have limited its further development in indoor positioning, such as the unstable positioning state caused by the fluctuation of Received Signal Strength Indicator (RSSI) and the low transmission frequency accompanied by a poor real-time performance in positioning and tracking moving targets. To address these problems, an indoor fusion positioning algorithm of Bluetooth technology and pedestrian dead reckoning (PDR) based on a particle filter with dynamic adjustment of weights calculation strategy (BPDW) will be proposed. First, an orderly statistical filter (OSF) sorts the RSSI values of a period and then eliminates outliers to obtain relatively stable RSSI values. Next, the Group-based Trilateration algorithm (GTP) enhances positioning accuracy. Finally, the particle filter algorithm with dynamic adjustment of weight calculation strategy fuses the results of Bluetooth positing and PDR to improve the performance of positioning moving targets. To evaluate the performance of BPDW, we compared BPDW with other representative indoor positioning algorithms, including fingerprint positioning, trilateral positioning (TP), multilateral positioning (MP), Kalman filter, and strong tracking filter. The results showed that BPDW has the best positioning performance on static and moving targets in simulation and actual scenes.

• 한국지반신소재학회논문집
• /
• 제20권1호
• /
• pp.45-55
• /
• 2021

본 연구에서는 수치해석모형을 통하여 수위변동시 필댐의 거동 특성을 분석하고 저수지의 안전관리 방안을 고찰하였다. 수치해석 프로그램(GTS NX 및 LIQCA)을 이용하여 필댐의 상·하류측 Shell 및 Core에서 수위승강에 따른 소성전단변형률, 수평변위, 응력경로, 간극수압 등을 분석하였다. 제체의 거동을 분석한 결과, 제체 내의 수위가 빠른 속도로 상승하면 간극수압 및 변위 또한 급격하게 증가하는데, 수위의 상승은 제체 내의 간극수압 증가와 제체의 포화도 증가를 유발하며, 제체의 유효응력을 감소시키는 것으로 나타났다. 이러한 수위승강 시 필댐의 거동 특성은 제체의 강도 및 강성이 저하되는 원인이 되고, 침투로 인해 발생하는 제체의 변형에 의해 소성전단변형률이 축적되어 변위 증가를 유발하는 것으로 판단된다. 본 연구를 통해 저수지의 정밀안전진단 상태평가 기준 개선안을 제안하였으며, 향후 저수지 안전진단지침 개정안 마련 시 기초자료로 활용될 수 있을 것으로 판단된다.

• 한국건설순환자원학회논문집
• /
• 제5권1호
• /
• pp.59-67
• /
• 2017

본 연구에서는 5~13mm 순환골재를 치환한 콘크리트의 현장 적용성을 평가하기 위하여 목업 시험체를 제작하여 콘크리트를 타설한 후 이들이 콘크리트의 제반특성에 미치는 영향을 실험적으로 고찰하고자 하였다. 기둥 및 벽체를 모사한 $1200{\times}800{\times}800mm$ 목업 시험체를 호칭강도 및 5~13mm 순환골재 치환율별로 7개 제작하였고, 24, 27 및 40MPa 급 호칭강도의 콘크리트에 5~13mm 순환골재 30%와 70%(24MPa만 해당)를 치환한 배합과 무치환배합을 선정하여 제조하였다. 실험항목으로 굳지않은 상태에서 슬럼프, 슬럼프플로, 블리딩을 측정하였고, 경화상태에서는 압축강도, 반발도, 코어강도 및 건조수축 길이변화율을 측정하였다. 연구결과 5~13mm 순환골재가 30% 치환된 경우 슬럼프, 슬럼프플로, 블리딩량은 플레인에 비해 향상되는 것으로 나타났고, 압축강도의 경우도 최밀 충전 효과에 기인하여 플레인보다 상승되는 것으로 나타났다. 목업 시험체의 높이별 반발도의 경우도 5~13mm 순환골재가 30%치환된 경우 상하간의 반발도차이가 감소되는 것을 알 수 있었다.