• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09a
• /
• pp.259-260
• /
• 2005

• KCID journal
• /
• v.2 no.1
• /
• pp.45-56
• /
• 1995

본 연구에서는 미국 West Virgini주 동북부에 위치한 Cheat River Basin 일원에 1985. 11월에 발생한 대홍수를 HEC-1 Computer Model로 재현시켰다. 전체 유역을 수문 및 지형 특성에 따라 각 소유역으로 나누어 각소유역에 대해 지표면유출을 계산하였다. 적용된 단위도는 본 유역의 지형 특성을 고려 Snyder's Unit Hydrograph를 이용하였다. Cheat River 전체에 대한 홍수조절 계획이 본 HEC-1

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.680-683
• /
• 1999

A thyristor controlled shunt compensator, which is installed in the middle of the transmission line is adopted for controlling real power flow in a simple power transmission system. By means on the Fourier series representation of the thyristor switching action and the system parameters, the thyristor current equations are derived, which transmit the required real power of the simple power transmission system and inform the thyristor firing angle, the thyristor conduction angle, the power flows and the harmonic characteristics EMTP simulations at the various operating points show the dynamic characteristics of the thyristor controlled shunt compensator and correspond to the results calculated with the Fourier series representation.

• Journal of computational fluids engineering
• /
• v.2 no.2
• /
• pp.18-25
• /
• 1997

A pressure-based Navier-Stokes numerical solver was used to compare solutions of the k-ε/RNG k-ε turbulence models. An efficient grid generation scheme, the transient grid generation with full boundary control, was used to solve the flows in the tip clearance region. Results indicate that the calculations using k-ε model captures various phenomena related to the tip clearance with good accuracy.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.123-125
• /
• 2003

Understanding the physics of electroosmotic flow is important to the optimum design and operation of microfluidic systems. Recent development on the topic in our group is summarized in this presentation. Applications to the variable-volume-Injection, micro flow switch, electrokinetic focusing, and flow cytometer will be presented with our novel design and control.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.6
• /
• pp.927-935
• /
• 1994

Detailed analysis of the commutation circuit of the proposed wide-frequency current source inverter is given. In this inverter a spike-limit circuit and a precommutation circuit are used. The spike-limit circuit is intended to limit spike voltage which is arising during commutation time in a current source inverter, and the precommutation circuit to reuse the energy which flows from main inverter to spike-limit circuit during commutation time to aid commutation. Thus voltage stress of main thyristor is minimized. Since this inverter can be made up of thyristors for phase control, it has some advantage in high voltage and high power application.

• ETRI Journal
• /
• v.27 no.6
• /
• pp.798-801
• /
• 2005

This Letter proposes a scheme that supports a fast handover effectively in hierarchical mobile IPv6 networks (F-HMIPv6) by optimizing the associated data and control flows during the handover. By NS-2 simulation, we show that the proposed scheme can give better handover performance than a simple combination of existing schemes.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.191-192
• /
• 2006

An orthogonal antenna is presented for reader applications of radio frequency identification (RFID) at 433 MHz. The antenna is composed of two $1{\times}2$ sub-arrays orthogonally placed on a ground plane. Two different feeding networks are introduced to control horizontal and vertical radiation current flows for each sub-array, respectively. An inverted-F structure is used as a radiation element with vertical and horizontal currents flowing on the radiator, thereby obtaining two linear polarizations. Antenna gains are 3.71 and 3.43 dBi and isolation between the two input ports is less than 25dB.

• IE interfaces
• /
• v.11 no.2
• /
• pp.1-11
• /
• 1998

In this paper, a case study is introduced on the development on a production planning system for the efficient control of work-in-process material flows. A special attention has been given to the prevention of the shortage of the automobile-components at the auto-assembly lines and the dynamic adaptation of the production plan to the continuously changing environment. The expertise of the production planner is analyzed and transformed into the logic of the software developed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.8
• /
• pp.1042-1050
• /
• 2003

A heating flow discharged from a 4-way ceiling type indoor unit has been investigated to determine the design parameters for the optimal flow control. The flow was measured by a PIV(particle image velocimetry) system and an experimental model of 1/10 scale with a transparent room was devised by satisfying the Archimedes number. This similarity is generally used in cases where the forced convection has similar magnitude of the natural convection. To optimize the heating flow, several vane angles and vane control algorithms of cross and right angle controls were considered. Regarding the vane angle, experimental results show that 30$^{\circ}$is an optimal angle to avoid re-suction flows without significant increase in flow noise. Temperature distribution measured in the environmental chamber ensures the increased thermal comfort when compared to the case, 60$^{\circ}$angle. At the optimal angle, applying open/close control gives rise to more uniform distribution of the heating flow than without control. Especially, the cross-control seems to be satisfactory for thermal comfort.