• Korean Journal of Agricultural Science
• /
• v.19 no.1
• /
• pp.16-27
• /
• 1992

To determine a potential of new sludge fertilizer for horticultural crops, comparative studies between commercial fertilizers (Jandibiryo and Wonyebokbi) and sludge fertilizer (Sludgebiryo) were made through examining the growth responses on zoysiagrass (Zoysia japponica Steud.) and several horticultural plants. 1. The pH of new sludge fertilizer remained near 6.5 regardless the particle size. The solubility of elements was highest in phosphorus, followed by nitrogen and potassium in the order. Especially, desorption of potassium was continued up to 48 hrs after solubilization. 2. There was an increase in shoot number per plant, length of stolon and rhizome, and root weight as well as clipping yield of zoysiagrass in the treatment of large size Sludgebiryo compared to small one and Jandibiryo. 3. Regardless the size of fertilizers, Sludgebiryo increased flower numbers in salvia (Salvia officinalis L. 'Hatzazz') compared to Wonyebokbi, although the difference was not great, However, leaf area and fresh weight of plant were more increased in Wonyebokbi application. 4. Flower diameter of marigold (Tagetes erecta L. 'Inca') was slightly increased in Sludgebiryo application, but the average number of lateral shoots and fresh weight per plant were significantly increased in the treatment of Wonyebokbi application. 5. Sludgebiryo effectively increased the length of both main and lateral shoots, number of flowers and weight of shoot in vinca (Vinca rosea L. 'Little Linde'), but root growth of plant was higher in Wonyebokbi application. 6, No differences between Wonyebokbi and Sludgebiryo were found in promoting the growth of leaves of perilla (Perilla frutescens Hara 'Yubsil' ), but chlorophyll content and seed weight were slightly higher in the application of Wonyebokbi compared to Sludgebiryo. In conclusion, the effectiveness of Sludgebiryo for horticultural plants was almost equal to commercial fertilizers such as Jandibiryo or Wonyebokbi. Expecially, Sludgebiryo appeared to effective on the growth of zoysiagrass, and the increase of flower size and numbers in flower crops. Results indicate that new-made Sludgebiryo can be recommended for turfgrass culture, and the flower crops in which quality depends on flower number and flower size.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.4
• /
• pp.234-238
• /
• 2008

This experiment was conducted to investigate the effect of growth retardants such as CCC and diniconazole in grafted cactus for control shipping product of grafted cactus, which had high degree of dependence upon export. The PGRs were 50, 100, 150 $mg{\cdot}L^{-1}$ CCC and diniconazole, respectively. Treatment of diniconazole and CCC not reduced diameter on Gymnocalycium mihanovichii var. friedrichii but number of tubercle reduced significantly according to the increase of diniconazole treatment, control was 7.2 tubercles, but with 100 $mg{\cdot}L^{-1}$ diniconazole was 6.4 tubercles. Treatment of diniconazole and CCC reduced significantly diameter and tubercle number on Chamaecereus silvestrii f. variegata at higher concentration. Diameter and height reduced significantly the treatment of CCC with 3.3 and 13.4 mm of 150 $mg{\cdot}L^{-1}$, respectively. Dry weight of root, rootstock and scion decreased at higher concentrations of CCC and diniconazole in Chamaecereus silvestrii f. variegata. The most effective method of plant growth retardants for controlling of shipping time was the 150 $mg{\cdot}L^{-1}$ CCC treatment.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.2
• /
• pp.141-145
• /
• 2009

This study was carried out to investigate growth response of Chamecereus silvestrii 'Hee-Mang' in accordance to day and night temperature in winter season. The plant height was maximized at $20/15^{\circ}C$ (day/night). Globe height and diameter were the highest in the day temperature of $25^{\circ}C$. Globe diameter was relevant high by increasing day temperature. Hunter 'a' value is significantly lower by decreasing of night temperature whereas 'b' value is higher. Characteristic of de-rooted grafting cactus was continually decreased until 15 days, then started growth again.

• Preventive Nutrition and Food Science
• /
• v.3 no.4
• /
• pp.324-328
• /
• 1998

We screened the methanol extracts from 133 plant species growing in Korea for antimicrobial activity against enterohemorrhagic Escherichia coli 0157 : H7. Those are selected from three plant grouping ; traditional medicinal herbs, edible plants, and flowers. They were tested by disk diffusion assay. From evaluation of the inhibition zone diameter of microbial growth, we found that the flower extract of Rhododendron Schilpenbachii Max had the most significant antimicrobial activity against this bacteria. Extracts from most of the vegetables and plants did not show antimicrobial activity except for the leaves of Ginkgo biloba L. and seeds of Prunus Dallicina L. did not show antimicrobial activity except for the leaves of Ginkgo biloba L. and the seeds of Prunus sallicina L.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.293-296
• /
• 2009

In roll forming process, a sheet metal is continuously progressively formed into a product with required cross-section and longitudinal shape, such as a circular tube with required diameter, wall-thickness and straightness, by passing through a series of forming rolls in arranged in tandem. In recent years, that process is often applied to the bumper rail in the automotive industries. In this study, a optimal front side member manufacturing technology, model deign and proper roll-pass sequences can be suggested by forming number of roll-pass and bending angle. And also effects of the process parameters on the final shape formed by roll forming defects were evaluated.

• Korean Journal Plant Pathology
• /
• v.14 no.1
• /
• pp.83-91
• /
• 1998

Gladioli (Gladiolus hybridus) showing flower colour breaking leaf mosaics, notched leaf, and dwarfing or lack of visible symptoms were collected from gladioli growing areas in Taegu and Kyungpook province, Korea. The three viruses isolated from the naturally infected gladioli were identified as broad bean wilt virus (BBWV), cucumber mosaic virus (CMV), and tobacco rattle virus (TRV) by their host range, immunosorbent electron microscopy (ISEM), enzyme-linked immunosorbent assay (ELISA), direct tissue blotting immunoassay (DTBIA), and intracellural symptoms. By DTBIA and ISEM, TRV was detected in gladiolus showing notched leaf, while CMV was frequently detected in gladioli with dwarfing, color breaking and malformation of flowers. BBWV was also often detected in many symptomless gladiolus plants, but TRV was detected in notched-leaf of gladiolus. Electron microcopic examination of negatively stained preparations showed that BBWV and CMV are spherical particles of 28 nm and 30 nm in diameter, and TRV is rigid rod-shaped particles of 40∼200 nm in length. The rigid rodshaped virus particles reacted positively with TRV antiserum in ISEM and DTBIA, respectively.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.199-202
• /
• 2009

In roll forming process, a sheet metal is continuously progressively formed into a product with required cross-section and longitudinal shape, such as a circular tube with required diameter, wall-thickness and straightness, by passing through a series of forming rolls in arranged in tandem. Tn this process, each pair of forming rolls installed in a forming machine play a particular role in making up the required cross-section and longitudinal shape of the product. In recent years, that process is often applied to the bumper rail in the automotive industries. In this study, a optimal Front Bumper Beam manufacturing technology, model deign and proper roll-pass sequences can be suggested by forming number of roll-pass and bending angle. And also effects of the process parameters on the final shape formed by roll forming defects were evaluated.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.357-360
• /
• 2008

In roll forming process, a sheet metal is continuously progressively formed into a product with required cross-section and longitudinal shape, such as a circular tube with required diameter, wall-thickness and straightness, by passing through a series of forming rolls in arranged in tandem. In this process, each pair of forming rolls installed in a forming machine play a particular role in making up the required cross-section and longitudinal shape of the product. In recent years, that process is often applied to the bumper rail in the automotive industries. In this study, a optimal SILL SIDE manufacturing technology, model deign and proper roll-pass sequences can be suggested by forming number of roll-pass and bending angle. And also effects of the process parameters on the final shape formed by roll forming defects were evaluated.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.33 no.2
• /
• pp.85-91
• /
• 2016

Exosomes are homogenous vesicles of 40-100 nm diameter produced endogenously. Exosomes are generated by inward budding into multi-vesicular bodies (MVB) and then released to extracellular space. Exosomes contain various nucleic acid and protein cargoes from their cells of origin and this endosomal cellular molecules are used for intracellular communication and for both promotion and suppression of immune responses. Recently, they are also considered as delivery vehicle for therapeutic proteins due to their characteristics of stability in body fluids and ability for target uptake. Also, they show less immune reactivity because the isolated exosome harboring therapeutic proteins can be from the same host. White-spotted flower chafer, Protaetia brevitarsis is one of the major insect commercially reared in Korea. There are bacterial and fungal pathogens causing diseases in the beetle, and these diseases incur economic loss to the larva-rearing farms. Due to their endosomal cargoes, exosomes are good candidates in use of disease diagnosis. In this study, we isolated insect exosome from the hemolymph of P. brevitarsis, and verified it by analysis of the exosome-specific surface proteins and RNA.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.236.1-236.1
• /
• 2015

The surface morphology of front transparent conductive oxide (TCO) films is very important to achieve high current density in amorphous silicon (a-Si) thin film solar cells since it can scatter the light in a better way. In this study, we present the low cost hydrothermal deposited uniform zinc oxide (ZnO) nano-flower structure with various aspect ratios for a-Si thin film solar cells. The ZnO nano-flower structures with various aspect ratios were grown on the RF magnetron sputtered AZO films. The diameters and length of the ZnO nano-flowers was controlled by varying the annealing time. The length of ZnO nano-flowers were varied from 400 nm to $2{\mu}m$ while diameter was kept higher than 200 nm to obtain different aspect ratios. The ZnO nano-flowers with higher surface area as compared to conventional ZnO nano structure are preferred for the better light scattering. The conductivity and crystallinity of ZnO nano-flowers can be enhanced by annealing in hydrogen atmosphere at 350 oC. The vertical aligned ZnO nano-flowers showed higher haze ratio as compared to the commercially available FTO films. We also observed that the scattering in the longer wavelength region was favored for the high aspect ratio of ZnO nano-flowers. Therefore, we proposed low cost and vertically aligned ZnO nano-flowers for the high performance of thin film solar cells.