• Journal of Communications and Networks
• /
• 제18권5호
• /
• pp.818-825
• /
• 2016

Network management and anomaly detection are challenges in high-speed networks due to the high volume of packets that has to be analysed. Flow-based analysis is a scalable method which reduces the high volume of network traffic by dividing it into flows. As sampling methods are extensively used in flow generators such as NetFlow, the impact of sampling on the performance of flow-based analysis needs to be investigated. Monitoring using sampled traffic is a well-studied research area, however, the impact of sampling on flow-based anomaly detection is a poorly researched area. This paper investigates flow sampling methods and shows that these methods have negative impact on flow-based anomaly detection. Therefore, we propose an efficient probabilistic flow sampling method that can preserve flow traffic distribution. The proposed sampling method takes into account two flow features: Destination IP address and octet. The destination IP addresses are sampled based on the number of received bytes. Our method provides efficient sampled traffic which has the required traffic features for both flow-based anomaly detection and monitoring. The proposed sampling method is evaluated using a number of generated flow-based datasets. The results show improvement in preserved malicious flows.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.88-91
• /
• 2004

The multiphase flow simulator, MPS, is developed based on the fractional flow approach considering tile fully three phase flow with general initial and boundary condition. Most existing fractional flow-based models are limited to two-phase flow and specific boundary conditions. Although there appears a number of three-phase flow models, they were mostly developed using pressure based approaches. As a result, these models require cumbersome variable-switch techniques to deal with phase appearance and disappearance. The use of fractional flow based approach in MPS makes it unnecessary to use variable-switch to handle the change of phase configurations. Also most existing fractional flow based models consider only specific boundary conditions. However, the present model considers general boundary conditions of most possible and plausible cases which consists of ten cases.

• 항공우주시스템공학회지
• /
• 제2권2호
• /
• pp.20-27
• /
• 2008

The characteristics of compressible flow are different from those of incompressible flow from the mathematical and physical point of view. Therefore, the way to solve the flowfield is different between compressible flow and incompressible flow. In general, density-based numerical algorithm is mainly used for compressible flow solver development. On the other hand, incompressible flow solver prefers to use pressure-based numerical algorithm. In this research, a compressible Navier-Stokes flow solver is developed by means of extending from pressure-based incompressible numerical algorithm to handle both compressible and incompressible flows using the same flow solver. The present flow solver is tested at various speed ranges and compared with the solutions of density-based compressible flow solver. Numerical results show a good agreement between two flow solvers.

• 한국전산유체공학회지
• /
• 제20권1호
• /
• pp.77-83
• /
• 2015

Flow characteristics of synthetic jet based flow supplying devices have been computationally investigated for different device shapes. Jet momentum was produced by the volume change of a cavity by two piezoelectric-driven diaphragms. The devices have additional flow path compared with the original synthetic jet actuator, and these flow path changes the flow characteristics of synthetic jet actuator. Four non-dimensional parameters, which were functions of the shapes of the additional flow path, were considered as the most critical parameters in jet performance. Comparative studies were conducted to compare volume flow rate and jet velocity. Computed results were solved by 2-D incompressible Navier-Stokes solver with k-w SST turbulence model. Detailed computations revealed that the additional flow path diminishes suction strength of the synthetic jet actuator. In addition, the cross section area of the flow path has more influence over the jet performances than the length of the flow path. Based on the computational results, the synthetic jet based flow supplying devices could be improved by applying suitable shape of the flow path.

• International Journal of Control, Automation, and Systems
• /
• 제1권1호
• /
• pp.119-126
• /
• 2003

The problem of tracking moving objects in a video stream is discussed in this pa-per. We discussed the popular technique of optical flow for moving object detection. Optical flow finds the velocity vectors at each pixel in the entire video scene. However, optical flow based methods require complex computations and are sensitive to noise. In this paper, we proposed a new method based on the Hough transform and on voting accumulation for improving the accuracy and reducing the computation time. Further, we applied the Boo-lean based edge detector for edge detection. Edge detection and segmentation are used to extract the moving objects in the image sequences and reduce the computation time of the CHT. The Boolean based edge detector provides accurate and very thin edges. The difference of the two edge maps with thin edges gives better localization of moving objects. The simulation results show that the proposed method improves the accuracy of finding the optical flow vectors and more accurately extracts moving objects' information. The process of edge detection and segmentation accurately find the location and areas of the real moving objects, and hence extracting moving information is very easy and accurate. The Combinatorial Hough Transform and voting accumulation based optical flow measures optical flow vectors accurately. The direction of moving objects is also accurately measured.

• Journal of Information Processing Systems
• /
• 제8권4호
• /
• pp.603-620
• /
• 2012

Proxy Mobile IPv6 (PMIPv6) is a network-based mobility support protocol and it does not require Mobile Nodes (MNs) to be involved in the mobility support signaling. In the case when multiple interfaces are active in an MN simultaneously, each data flow can be dynamically allocated to and redirected between different access networks to adapt to the dynamically changing network status and to balance the workload. Such a flow redistribution control is called "flow mobility". In the existing PMIPv6-based flow mobility support, although the MN's logical interface can solve the well-known problems of flow mobility in a heterogeneous network, some missing procedures, such as an MN-derived flow handover, make PMIPv6-based flow mobility incomplete. In this paper, an enhanced flow mobility support is proposed for actualizing the flow mobility support in PMIPv6. The proposed scheme is also based on the MN's logical interface, which hides the physical interfaces from the network layer and above. As new functional modules, the flow interface manager is placed at the MN's logical interface and the flow binding manager in the Local Mobility Anchor (LMA) is paired with the MN's flow interface manager. They manage the flow bindings, and select the proper access technology to send packets. In this paper, we provide the complete flow mobility procedures which begin with the following three different triggering cases: the MN's new connection/disconnection, the LMA's decision, and the MN's request. Simulation using the ns-3 network simulator is performed to verify the proposed procedures and we show the network throughput variation caused by the network offload using the proposed procedures.

• 대한전자공학회논문지TC
• /
• 제45권9호
• /
• pp.39-48
• /
• 2008

오늘날 인터넷에서는 실시간 및 비실시간 등 다양한 멀티미디어 서비스가 존재하고 있으며, 이러한 개개의 서비스 특성을 만족 시키는 데는 한계가 있다. 따라서 서비스의 QoS를 보장하기 위한 한 방법으로 flow-aware 네트워킹 개념을 갖는 네트워크를 제안하고 있다. 인터넷에서 네트워크 이용율 향상과 통계적으로 서비스 보장을 위해 MBAC(Measurement-Based Admission Control) 방식이 연구되었다. 대부분의 MBAC 방식은 집합 flow에 대해 적용하는 총체적 MBAC 알고리즘이며, 입력 flow에 적용하는 per-flow MBAC 알고리즘이 최근 연구되기 시작하고 있다. 본 논문에서는 per-flow MBAC 알고리즘 기반 시스템에서 flow를 특성에 따라 그룹핑하고, 각 그룹핑된 flow에서 먼저 입력되는 flow에 우선순위를 주는 DPS(Dynamic Priority Scheduling)알고리즘 적용한다. 그리고 각 그룹핑된 그룹에 일정대역을 고정 할당한 다음에 그룹 인접대역간 대역폭 차용이 가능한 우선등급 하위대역 차용방식과 각 그룹핑된 flow에 그룹핑된 flow 특성에 따라 대역을 동적으로 할당하는 동적 대역할당 방식을 제안한다. 제안한 두 방식을 시뮬레이션을 통해 서비스 지속성, 링크 이용율, 지연 특성을 평가 분석한다. 그 결과 제시한 방식이 기존의 방식보다 우수하고, 다양한 멀티미디어 환경에서 더 효율적 방식이라는 것을 분명히 한다.

• 한국컴퓨터정보학회논문지
• /
• 제21권1호
• /
• pp.65-72
• /
• 2016

Network virtualization is an emerging technology for solving the rigidity of the physical network infrastructure. The innovative technique virtualizes all resources in the network, including the network links and nodes, and provides a number of virtual networks on a single network infrastructure. In order to realize a virtual network, a thorough and complete monitoring of all resources in the network should be performed firstly. OpenFlow is an open source stack for network virtualization. However, it is impossible to apply OpenFlow to AP-based legacy wireless LAN environment because OpenFlow targets ethernet-based LAN environment. In this paper, we implement an adaptor-styled virtual switch for AP-based wireless LAN through customizing the Open vSwitch which is a virtual switch of OpenFlow. The evaluation test results show that the implemented OpenFlow stack operates successfully. The implemented OpenFlow stack can now be plugged immediately in existing AP-based wireless LAN environment and plays network resource monitoring. In the future, we can develop wireless LAN virtualization applications on the wireless OpenFlow stack.

• 지식경영연구
• /
• 제7권2호
• /
• pp.53-68
• /
• 2006

Knowledge has become an important resource for organization. The manufacturing industry is usually operated on the basis of business processes, and most workers are familiar with their own processes. The process-based approach, therefore, can provide an efficient way to capture and navigate knowledge. In this study, we focus on knowledge which may be missed during knowledge transfer among workers. For this, we propose a method for analyzing knowledge flow, which is passed among business processes. We propose a process-based knowledge management framework for analyzing knowledge flow, which employs a two-phase analysis: process analysis and knowledge flow analysis. A knowledge flow model, represented by Knowledge Flow Diagram, is proposed as a tool for representing knowledge. We formulate several semantics for knowledge flow modeling. We build the three-level schema: conceptual, logical, and physical in order to automate the knowledge model adaptive to knowledge management systems. The proposed approach is verified and illustrated through a case study on the manufacturing process of A Company.

• 대한설비공학회지:설비저널
• /
• 제17권5호
• /
• pp.590-597
• /
• 1988

Characteristics of flow regime transitions in inclined upwards gas-liquid two-phase flow have been investigated based upon a statistical analysis of instantaneous pressure drop curves through an orifice. The probability density functions of the curves indicate distinct patterns depending upon two-phase flow regime, which are very similar to those of horizontal two-phase. The dimensionless intensity of fluctuations of the pressure drops sharply change as the flow transitions such as plug-slug, pseudo slug-slug and annular-slug take place. The effects of inclination angle on the flow regime transitions have been also investigated. The results show that the method to identify the flow pattern based upon the statistical analysis of instantaneous pressure drops is suitable for inclined flow as well as horizontal flow.