• 제목/요약/키워드: Flow unsteadiness

검색결과 66건 처리시간 0.026초

삽입관이 있는 확장형 소음기에서의 기류음 감소 (Reduction of Flow-Induced Noise in an Expansion Muffler with Lids)

  • 강웅;김형진;성형진
    • 대한기계학회논문집B
    • /
    • 제33권2호
    • /
    • pp.79-84
    • /
    • 2009
  • Turbocharger has been widely used in many passenger cars in application with diesel engines because of high power and fuel efficiency. However, flow-induced noise (whoosh or hissing noise) which is generated within a compressor during its operation at marginal surge line can deteriorate noise characteristics. Hissing noise excitation is associated with the generation of turbulence within the turbocharger compressor and radiated through the transmission path in a turbocharger system. In this study, a expansion muffler with lids is devised and installed in the transmission path to reduce the hissing noise. Acoustic and fluid dynamic characteristics for the muffler are investigated which are related to the unsteadiness of turbulence and pressure in the turbocharger system. A transfer matrix method is used to analyze the transmission loss of the muffler. A simple expansion muffler with lids is proposed for the reduction of high frequency component noise. Turbulence simulation is carried out by a standard k - ${\varepsilon}$ model. An optimal design condition of the muffler is obtained by extensive acoustic and fluid dynamic analysis on the engine dynamometer with anechoic chamber. A significant reduction of the hissing noise is achieved at the optimal design of the muffler as compared with the conventional muffler.

초음속 이젝터 펌프 유동에 관한 수치해석 (A CFD Study of the Supersonic Ejector-Pump Flows)

  • 이영기;김희동;서태원
    • 한국추진공학회지
    • /
    • 제3권4호
    • /
    • pp.58-66
    • /
    • 1999
  • 초음속 이젝터 유동특성은 압축성, 비정상성, 충격파 둥으로 인하여 충분히 알려져 있지 않다. 종래의 이론적/실험적 연구결과들은 대부분 1차원 가정 하에서 얻어진 것들이며, 현재까지 수치계산법을 이용하여 이젝터 내부 유동장을 해석한 실례가 많지 않다. 뿐만 아니라 기존의 수치계산 결과들은 2차유동의 질량유량이 매우 작거나 없는 단순한 유동장에 대한 것들이었다. 본 연구에서는 초음속 이젝터-펌프 유동장을 수치적으로 해석하기 위하여 축대칭 수치계산 모델을 이용하였다. 수치계산은 축대칭 압축성 Navier-Stokes 방정식에 유한체적법을 적용하였으며, 표준형 $\kappa$ -$\varepsilon$ 난류모델을 이용하였고, 2차유동의 질량유량을 변화시켜 1차유동과 2차유동의 질량비의 변화에 따른 이젝터 내부 유동장의 변화를 조사하였다. 그 결과, 2차목을 가지지 않는 일정 단면적의 혼합부를 가지는 이젝터의 경우, 이젝터 내부의 유동장 특성은 2차유동의 질량유량의 변화와 거의 무관하게 나타났다. 그러나 2차목을 가지는 경우는 2차유동의 질량유량의 증가에 따른 노즐출구 주위에서 배압으로 인하여 이젝터 내부 유동장이 크게 변화하였다.

  • PDF

2차 순유동과 역유동을 이용한 추력벡터 제어법에 관한 연구 (A Study of the Thrust Vectoring Control Using Secondary Co- and Counter-Streams)

  • 임채민;김희동
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2004년도 제23회 추계학술대회 논문집
    • /
    • pp.109-112
    • /
    • 2004
  • 최근에 유체적 순유동과 역유동 개념을 이용한 추력 벡터법은 추진 비행체의 조종성을 향상시키는 것뿐만 아니라 꼬리날개로 발생하는 공기역학적 항력을 감소시키기 때문에 많은 관심을 받고 있다. 그러나 유체적 추력벡터 제어법은 유동장이 충격파와 경계층의 상호작용, 박리, 강한 비정상성 등과 같은 매우 복잡한 물리현상을 포함하고 있기 때문에 비행체의 설계에 적용하기가 매우 어렵다. 유체적 순유동과 역유동 개념을 이용한 효율적인 추력벡터 제어법을 얻기 위한 지금까지의 연구들이 미비한 실정이며 실제적용을 위해 체계적인 연구가 필요하다. 본 연구에서는 유체적 순유동과 역유동 개념을 이용한 추력벡터 제어법의 제어 효과를 연구하기 위해 수치적 연구가 수행되었다. 주어진 압력비에 대해, 추력편향각은 주제트의 5퍼센트 미만의 임의 흡입유량에서 최대 값을 가진다. 보다 긴 collar를 적용하는 경우, 같은 편향각은 보다 작은 흡입유량으로 가능하였다.

  • PDF

Recent Application of CFD in ship Hydrodynamics

  • Kawamura, Takafumi
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년도 학술대회
    • /
    • pp.321-326
    • /
    • 2008
  • The engineering use of CFD is recently extending to the prediction of maneuvering characteristics, response to waves, propeller performance, and so on. The focus of the research is shifting to simulation of more complex processes. Typical examples of such processes are bow or stern slamming, green water problem, propeller cavitation, hull-propeller interaction, or drag reduction by bubble injection. Those processes are characterized by keywords such as high nonlinearity, unsteadiness, multiphase flow. In this paper, two new attempts which have been recently made by the author's research grop are presented. One is the prediction of propeller cavitation and its effect to the ship hull. The others is the application to the drag reduction by use of air bubbles.

  • PDF

Recent Application of CFD in Ship Hydrodynamics

  • Kawamura, Takafumi
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년 추계학술대회논문집
    • /
    • pp.321-326
    • /
    • 2008
  • The engineering use of CFD is recently extending to the prediction of maneuvering characteristics, response to waves, propeller performance, and so on. The focus of the research is shifting to simulation of more complex processes. Typical examples of such processes are bow or stern slamming, green water problem, propeller cavitation, hull-propeller interaction, or drag reduction by bubble injection. Those processes are characterized by keywords such as high nonlinearity, unsteadiness, multiphase flow. In this paper, two new attempts which have been recently made by the author's research group are presented. One is the prediction of propeller cavitation and its effect to the ship hull. The other is the application to the drag reduction by use of air bubbles.

  • PDF

격자 볼츠만법을 이용한 단순 확장형 소음기 음향특성 해석 (Acoustical Performance Analysis of Simple Expansion Silencer using Lattice Boltzmann Method)

  • 이송준;이광세;정철웅
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2014년도 추계학술대회 논문집
    • /
    • pp.966-972
    • /
    • 2014
  • The Lattice Boltzmann Method (LBM) has attracted attention as an alternative numerical algorithm for solving fluid mechanics, and its intrinsic unsteadiness and weak numerical damping make it more suitable for aeroacoustic problems. In this paper, applicability of the LBM for solving flow noise problems is tested by applying it to predict transmission loss of a simple expansion silencer. The time history of the static pressure is recorded at the inlet and outlet pipes. The transmission loss (TL) of the muffler is computed by using three point method and two source method, respectively. The TL calculated using the LBM is compared with that computed using finite element method (FEM) and measured data. It is found through these comparisons that the LBM is capable of predicting TL of the simple expansion silencer accurately, which it is difficult to predict using the conventional CFD methods based on the RANS solvers.

  • PDF

유리용융로의 시간종속 자연대류 (Time-dependent natural convection in a glass melting furnace)

  • 임광옥;이관수
    • 대한기계학회논문집B
    • /
    • 제21권7호
    • /
    • pp.919-927
    • /
    • 1997
  • The main purpose of this study is to determine bifurcation as the primary instability of a glass melting furnace. Steady-state and unsteady characteristics of natural convection in the partially open cavity as appeared in a glass melting furnace is investigated by using numerical analysis. Three types of convection, such as steady laminar, unsteady periodic or unsteady quasi-periodic convection may occur according to the temperature difference between upper two isothermal surfaces along the depth of cavity in a glass melting furnace. In the temperature difference of 150-900 K between batch and free surface, the larger the temperature difference, the weaker the convection strength and unsteadiness. Since the glass viscosity is increasing exponentially in the lower temperature, the batch freezes the thermofluidic field especially below the surface of it. If the depth of cavity is 0.5 m, the bifurcation to time-dependent natural convection may occur in the range of 60-650 K. If that is 1.0 m, it may occur in the whole range of temperature difference.

고 받음각 2차원 NACA0012 에어포일 주위의 비정상 공기역학적 특성 (Unsteady Aerodynamic characteristics at High Angle of Attack around Two Dimensional NACA0012 Airfoil)

  • 유재경;김재수
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2011년 춘계학술대회논문집
    • /
    • pp.414-419
    • /
    • 2011
  • Missile am fighter aircraft have been challenged by low restoring nose-down pitching moment at high angle of attach. The consequence of weak nose-down pitching moment can be resulting in a deep stall condition. Especially, the pressure oscillation has a huge effect on noise generation, structure damage, aerodynamic performance and safety, because the flow has strong unsteadiness at high angle of attack. In this paper, the unsteady aerodynamics coefficients were analyzed at high angle of attack up to 60 degrees around two dimensional NACA0012 airfoil. The two dimensional unsteady compressible Navier-Stokes equation with a LES turbulent model was calculated by OHOC (Optimized High-Order Compact) scheme. The flow conditions are Mach number of 0.3 and Reynolds number of $10^5$. The lift, drag, pressure distribution, etc. are analyzed according to the angle of attack. The results at a low angle of attack are compared with other results before a stall condition. From a certain high angle of attack, the strong vortex formed by the leading edge are flowing downstream as like Karman vortex around a circular cylinder. Unsteady velocity field, periodic vortex shedding, the unsteady pressure distribution on the airfoil surface, and the acoustic fields are analyzed. The effects of these unsteady characteristics in the aerodynamic coefficients are analyzed.

  • PDF

구조 변형이 있는 평면 위의 비정상 유동해석을 위한 준-정상 기법 (A Quasi-Steady Method for Unsteady Flows over Surfaces with Structural Deformation)

  • 김민수;이남훈;이학태;이승수;김헌주
    • 한국항공우주학회지
    • /
    • 제45권1호
    • /
    • pp.1-9
    • /
    • 2017
  • 본 논문은 초음속 공탄성(aeroelastics) 해석 시간 절약을 위한 준-정상 축약 모델을 제안하고 이를 검증하였다. 유동이 초음속이고 유동의 특성시간이 구조변형의 특성시간에 비해 작을 경우, 유동의 비정상성이 작아 비정상 유동해 대신 정상 유동해를 이용하여 공탄성 해석을 할 수 있다. 크리깅 기법을 적용하여 유동의 축약모델을 구축하였다. 매 시간 축약모델로부터 예측된 표면해가 구조해석의 경계조건으로 사용되었다. 크리킹 기법을 적용한 축약모델을 비정상해석 결과와 비교하여 검증하였다.

POD(Proper Orthogonal Decomposition) 방법을 이용한 불안정한 프로펠러 후류 해석 (Analysis of the Unstable Propeller Wake Using POD Method)

  • 백부근;김경열;김기섭;이정엽;이상준
    • 대한조선학회논문집
    • /
    • 제47권1호
    • /
    • pp.20-29
    • /
    • 2010
  • The complicated flow characteristics of upper propeller wake influenced by hull wake are investigated in detail in the present study. A two-frame PIV (particle image velocimetry) technique was employed to visualize the upper propeller wake region. As the upper hull wake affects strongly propeller inflow, upper propeller wake shows much unstable vortical behavior, especially in the tip vortices. Velocity field measurements were conducted in a cavitation tunnel with a simulated hull wake. Generally, the hull wake generated by the hull of a marine ship may cause different loading distributions on the propeller blade in both upper and lower propeller planes. The unstable upper propeller wake caused by the ship's hull is expressed in terms of turbulent kinetic energy (TKE) and is identified by using the proper orthogonal decomposition (POD) method to characterize the coherent flow structure in it. Instabilities appeared in the eigen functions higher than the second one, giving unsteadiness to the downstream flow characteristics. The first eigen mode would be useful to find out the tip vortex positions immersed in the unstable downstream region.