• Nuclear Engineering and Technology
• /
• 제47권4호
• /
• pp.407-415
• /
• 2015

A developing post-dryout region is characterized by significant heat transfer enhancements compared with the fully developed post-dryout region. The heat transfer enhancements are mainly due to upstream disturbance and entrained droplets in the region immediately downstream of the critical heat flux location. In this paper, an improved heat transfer correlation is developed for the developing post-dryout regions in vertical tubes over a wide range of flow conditions. The correlation represents a correction factor for the fully developed film-boiling look-up table to be applied to the developing post-dryout region. The new correlation significantly improves the heat transfer prediction in the developing post-dryout regions and provides very good agreement with the experimental data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2584-2586
• /
• 2000

A drum level control is one of the most important control systems in thermal power plant. The control objective of drum level of boiler in thermal power plant is to maintain drum level at constant set-point regardless of disturbance such as main steam flow. The implemented drum level controller is the cascade PI controller. The important factor in drum level controller is the parameters of two PI controllers. The tuning of PI controller parameter is tedious and time-consuming job. In this paper, the relay feedback Ziegler - Nichols tuning method extended to auto-tune cascade PI drum level controller. Finally, the simulation result using boiler model in Power Plant shows the validity of auto-tuned cascade PI controller.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1995년도 추계학술대회
• /
• pp.18-21
• /
• 1995

When we inject drugstuffs to a patient for a long time, it is important to control proper injection amount and flow rate. Since inproper injection amount and a flow rate would cause bad a recovery a patient, the relience of sensors which detect injection amount is an important factor for whole injection systems' performance. In this research, we've compared the suitability of three sensors for injection pump monitoring system. The three types of sensors, piezo film sensor, photo transistor made up with three transmitting photodiodes and receving photodiode, and photo array, were selected for comparing. Using suggested data processing technique and photo amy sensors, we could minimize the effect of interference, disturbance, illumanation change, and sensitivity change caused by sensor's position. According to the experiments, the photo amy showed the higher reliance than any other the three types of sensors. The developed systems could be the foundation of beginning home production of infusion pump system and available for the base model of whole monitoring and control systems.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권2호
• /
• pp.97-106
• /
• 1999

This paper proposes the structure and the algorithm of the Fuzzy-Neural Controller(FNNC) which is able to adapt itself to unknown plant and the change of circumstances at the Fuzzy Logic Controller(FLC) with the Neural Network. This Learning Fuzzy Logic Controller is made up of Fuzzy Logic controller in charge of a main role and Neural Network of an adaptation in variable circumstances. This construct optimal fuzzy controller applied to the 2-area load frequency control of power system, and then it would examine fitness about parameter variation of plant or variation of circumstances. And it proposes the optimal Scale factor method wsint three preformance functions( E, , U) of system dynamics of load frequency control with error back-propagation learning algorithm. Applying the controller to the model of load frequency control, it is shown that the FNNC method has better rapidity for load disturbance, reduces load frequency maximum deviation and tie line power flow deviation and minimizes reaching and settling time compared to the Optimal Fuzzy Logic Controller(OFLC) and the Optimal Control for optimzation of performance index in past control techniques.

• Fibers and Polymers
• /
• 제7권4호
• /
• pp.424-431
• /
• 2006

Roll drafting, a mechanical operation attenuating fiber bundles to an appropriate thickness, is an important operation unit for manufacturing staple yams. It influences not only the linear density regularity of the slivers or staple yams that are produced, but also the quality of the textile product and the efficiency of the thereafter processes. In this research, the dynamic states of the fiber bundle in the roll drafting zone were analyzed by simulation, based on the mathematical model that describes the dynamic behavior of the flowing bundle. The state variables are the linear density and velocity of the fiber bundles and we simulated the dynamics states of the bundle flow, e.g., the profiles of the linear density and velocity in the draft zone for various values of the model parameters and boundary conditions, including the initial conditions to obtain their influence on the dynamic state. Results showed that the mean velocity profile of the fiber bundle was strongly influenced by draft ratio and process speed, while the input sliver linear density has hardly affected the process dynamics. Velocity variance of individual fibers that could be supposed to be a disturbing factor in drafting was also influenced by the process speed. But the major disturbance occurred due to the velocity slope discontinuity at the front roll, which was strongly influenced by the process speed. Thickness of input sliver didn't play any important role in the process dynamics.

• Clinical and Experimental Pediatrics
• /
• 제53권6호
• /
• pp.680-687
• /
• 2010

Patients with congenital heart diseases (CHD) are confronted with early- and late-onset complications, such as conduction disorders, arrhythmias, myocardial dysfunction, altered coronary flow, and ischemia, throughout their lifetime despite successful hemodynamic and/or anatomical correction. Rhythm disturbance is a well-known and increasingly frequent cause of morbidity and mortality in patients with CHD. Predisposing factors to rhythm disturbances include underlying cardiac defects, hemodynamic changes as part of the natural history, surgical repair and related scarring, and residual hemodynamic abnormalities. Acquired factors such as aging, hypertension, diabetes, obesity, and others may also contribute to arrhythmogenesis in CHD. The first step in evaluating arrhythmias in CHD is to understand the complex anatomy and to find predisposing factors and hemodynamic abnormalities. A practical stepwise approach can lead to diagnosis and prompt appropriate interventions. Electrophysiological assessment and management should be done with integrated care of the underlying heart defects and hemodynamic abnormalities. Catheter ablation and arrhythmia surgery have been increasingly applied, showing increasing success rates with technological advancement despite complicated arrhythmia circuits in complex anatomy and the difficulty of access. Correction of residual hemodynamic abnormalities may be critical in the treatment of arrhythmia in patients with CHD.

• Journal of Korean Neurosurgical Society
• /
• 제59권5호
• /
• pp.512-517
• /
• 2016

Objective : The pathophysiology of idiopathic Chiari malformation (CM) type 1 is disturbance of free cerebrospinal fluid (CSF) flow and restoration of normal CSF flow is the mainstay of treatment. Additional migration of the medulla oblongata in pediatric patients is referred to as CM type 1.5, but its significance in adult patients is unknown. This study is to compare surgical outcomes of adult idiopathic CM type 1.5 with that of type 1. Methods : Thirty-eight consecutive adult patients (M : F=11 : 27; median, 33.5; range, 18-63) with syringomyelia due to idiopathic CM type 1 were reviewed. Migration of the medulla oblongata was noted in 13 patients. The modified McCormick scale (MMS) was used to evaluate functional status before and one year after surgery. All patients underwent foramen magnum decompression and duroplasty. Factors related to radiological success (${\geq}50%$ decrease in the diameter of the syrinx) were investigated. The follow-up period was $72.7{\pm}55.6$ months. Results : Preoperative functional status were MMS I in 11 patients and MMS II in 14 of CM type 1 and MMS I in 8 and II in 5 of CM type 1.5. Of patients with MMS II, 5/14 patients in group A and 3/5 patients in group B showed improvement and there was no case of deterioration. Radiological success was achieved in 32 (84%) patients and restoration of the cisterna magna (p=0.01; OR, 46.5) was the only significant factor. Conclusion : Migration of the medulla oblongata did not make a difference in the surgical outcome when the cisterna magna was restored.

• 센서학회지
• /
• 제5권3호
• /
• pp.65-73
• /
• 1996

수액을 장시간 환자에게 주입할 때 적절한 주입량, 주입률을 조절하는 것이 중요하다. 부적절한 주입량은 환자의 회복에 좋지 않은 영향을 끼칠 수 있으므로 주입량을 감지하는 센서의 신뢰도는 인퓨전 펌프 시스템에 많은 영향을 미친다. 본 연구에서는 인퓨전 펌프 시스템에 사용될 3가지 센서의 성능을 검토하였다. 피에조 필름, 광트렌지스터 및 광 다이오드 어레이의 3가지 센서가 비교되었으며 제안하는 신호 처리 기법과 광 다이오드 어레이를 사용한 기법을 이용하여 간섭과 진동 조도변화 센서의 위치에 따른 감도 변화등의 영향을 줄일 수 있었다. 실험 결과 광 다이오드 어레이가 다른 센서들에 비하여 높은 신지도를 보여 주었다.

• 한국수자원학회논문집
• /
• 제55권4호
• /
• pp.291-300
• /
• 2022

산지의 인위적인 교란은 양토 비율이 적은 심토를 지표에 노출시켜 침식의 민감도를 증가시킨다. 본 연구는 강우유입 면상흐름에 의해 발생하는 세류간 침식에 있어서 사질토(sand)와 양질사토(loamy sand)의 침식성(erodibility)을 평가하고자 강우모의 실험을 수행하였다. 실험에 사용한 사질토와 양질사토의 평균입경은 각각 0.936 mm와 0.611 mm이고, 유기물함량은 각각 2.0%와 4.2%이었다. 실험 플롯에서 지표흐름의 유출계수는 양질사토가 사질토보다 1.16 배 증가하였다. 면상침식에 의한 양질사토와 사질토의 평균 토사유출량은 각각 3.71kg/m²/hr와 1.13kg/m²/hr 이었다. 강우침식능인자에 대한 토사유출량의 비인 침식성은 양질사토가 사질토보다 평균 3.65 배 컸다. 급경사면의 경사도가 24°에서 28°로 증가함에 따라 두 토양에 대한 유사농도와 침식성은 약 20%정도 증가하였다. 소규모 플롯에 대한 사질토양의 침식성인자 K 는 실측 침식성에 비해 과대 산정되었다. 이 결과는 RUSLE가 사질토양에서 면상침식에 의해 발생하는 토사유출량을 과대평가할 수 있음을 의미한다.

• 생태와환경
• /
• 제41권4호
• /
• pp.441-448
• /
• 2008

The purpose of this study was to analyze chemical water quality, fish trophic guilds, tolerance indicators, and fish community conditions in the Gap Stream and to compare the stream conditions between the unimpacted site and impacted site. This study was conducted in the physically stable season (May 2008) to minimize physical impacts such as flow and hydrological disturbance, and applied the study in the Gap Stream with two sites of unimpacted upstream site (Unim-S), mainly surrounded by forested area and impacted site (Im-S), influenced by the wastewater disposal plants and industrial complex in the urban region. Chemical data analysis showed that the degree of organic matter pollution, based on BOD, and COD, was $2{\sim}3$ fold greater in the Im-S than the Unim-S, and that TP, as eutrophication indicators, was 4.7 fold greater in the Im-S. Also, $NH_3-N$ was in 8.2 fold greater in the Im-S ($6.25\;mg\;L^{-1}$) than the Unim-S ($0.76\;mg\;L^{-1}$), indicating a massive influence of wastewater from the disposal plant. Similar results were found in other chemical parameters. Thus, chemical impacts in the Im-S were evident, compared to the unimpacted site. Evaluations of tolerant indicator species indicated that sensitive species were dominant in the Unim-S (23.9%) and tolerant species were dominant (97.8%) in the Im-S. Condition factor (CF) was averaged 0.95 ($0.68{\sim}1.18$) in the Unim-S and 1.08 ($0.93{\sim}1.22$) in the Im-S. Fish community in the Unim-S and Im-S was categorized as Zacco-community and Hemibarbus-community, respectively, and the community diversity index (H') was significantly (p<0.05) higher in the Unim-S (0.810) than the Im-S (0.466). Overall, our results suggest that the comparison approach of various chemical and ecological indicators provide important information in identifying multiple stressors in the stream ecosystems.