• 동력기계공학회지
• /
• 제16권4호
• /
• pp.51-59
• /
• 2012

The computational flow analysis using LES technique was carried out to investigate the flow characteristics of a sirocco fan under the maximum flowrate condition. The commercial SC/Tetra software was used for this unsteady and three-dimensional numerical analysis. In consequence, because a flow is unstable within the range of about 50% of a housing depth from a bellmouth around the cutoff region, the passing flow through the blade cascade occurred on the X-Y plane is a slow or a reverse with approaching to the housing inlet. Also, the secondary flow shows on the radial plane of a housing, and its vortex center exists within about 33% of a housing depth from a bellmouth except the cutoff region. Moreover, the flow occurring on the exit plane of a sirocco fan shows a complex secondary flow.

• 한국항만학회지
• /
• 제14권1호
• /
• pp.97-105
• /
• 2000

This paper presents an automatic mesh generation considering water depth, which is based on the depth interpolation. The key feature of this method is that the position of a mesh on any depth in the shallow water area can be generated. The Examples are carried out, and the results are shown to be good. This method is shown to be a useful and powerful tool for the flow calculation for the seabed topography.

• 한국수자원학회논문집
• /
• 제31권3호
• /
• pp.291-301
• /
• 1998

본 연구에서는 치수 및 이수에 있어서 항상 어려움을 겪고 있는 개수로 만곡구간에서 하상재료의 변화에 따른 흐름 및 하상변동 특성을 분석하기 위하여 중심각 180'인 만곡수로를 제작하고, 모래(D50 = 0.26 MM, S = 1.54)와 안트라싸이트(D50 = 0.26 mm, S = 1.54)를 하상재료로 선택하여 실험을 실시하였다. 실험결과, 최대세굴심은 만곡각 30'-60' 외측제방부근에서 평균수심의 약 2배까지 실측되었으며, 최대세굴심의 발생위치는 안트라싸이트인 경우에 모래에서보다 5'-15' 정도 상류부에서 관측되었다. 종단면 최대유속선은 하상재료와 관계없이 내측에서 외측으로 편의되고 있으며, 하상이 거칠수록 하류로 이동하였다. 하상이 매끄러울수록 흐름의 최대 편의각은 만곡수로 상류부에서 발생하고 있으며, 그 크기도 증가하였다. 안트라싸이트의 경우가 모래의 경우보다 2차흐름이 크게 발생하는 것으로 실측되었으며, 두개의 핵이 존재하는 현상이 관측되었다.

• 대한조선학회논문집
• /
• 제60권2호
• /
• pp.120-134
• /
• 2023

In this study, hydrodynamic characteristics of dam break flow were investigated by a series of experiments. The experiments were performed in a 2-D rectangular flume with obtaining instantaneous images of dam break flow to capture the free surface elevation, and pressure distributions on vertical wall and bottom of the flume. The initial water depth of the dam break flow was changed into 3 different heights, and the gate opening speed was changed during the experiments to study the effect of the gate speed in the dam break flow. Generation of dam break phenomena could be classified into three stages, i.e., very initial, relatively stable, and wall impact stages. The wall impact stage could be separated into 4 generation phases of wall impinge, run-up, overturning, and touchdown phases based on the deformation of the free surface. The free surface elevation were investigated with various initial water depth and compared with the analytic solutions by Ritter (1892). The pressures acting on the vertical wall and bottom were provided for the whole period of dam break flow varying the initial water depth and gate open speed. The measurement results of the dam break flow was compared with the hydrodynamic characteristics of green water phenomena, and it showed that the dam break flow could overestimate the green water loading based on the estimation suggested by Buchner (2002).

• 한국환경복원기술학회지
• /
• 제6권6호
• /
• pp.49-55
• /
• 2003

Total phosphorous removal rate was examined of a subsurface-flow treatment wetland system which was constructed on floodplain in the down reach of the Kwangju Stream in Korea from May to June 2001. Its dimensions were 29 meter in length, 9 meter in width and 0.65 meter in depth. A bottom layer of 45 cm in depth was filled with crushed granite with about 15~30 mm in diameter and a middle layer of 10 cm in depth had pea pebbles with about 10 mm in diameter. An upper layer of 5 cm in depth contained course sand. Reeds(Phragmites australis) were transplanted on the surface of the system. They were dug out of natural wetlands and stems were cut at about 40 cm height from their bottom ends. Water of the Kwangju Stream flowed from a submerged dam into it via a pipe by gravity flow and treated effluent was funneled back into the Stream. The number of reed stems increased from 80 stems/$m^2$ in July 2001 to 136 stems/$m^2$ in September 2001. The hight of stems was 44.2 cm in July 2001 and 75.3 cm in September 2001. The establishment of reeds at early operating stage of the system was good. Volume and water quality of inflow and outflow were investigated from July 2001 through December 2001. The average inflow was 40 $m^3$/day and hydraulic detention time was about 1.5 days. The concentration of total phosphorous n influent and effluent was 0.83 and 0.33 mg/L, respectively. The removal rate of total phosphorous averaged about 60%. The removal efficiency was slightly higher, compared with that of subsurface-flow wetlands operating in North America, whose retention rate of total phosphorous was reported to be about 56%. The good abatement rate could be attributed to sedimentation of particle phosphorous in pores of the media and adsorption of phosphorous to the biofilm developed on the surface of them. Increase of standing density of reeds within a few years will develop root zones which may lead to increment in the phosphorous retention rate.

• 대한토목학회논문집
• /
• 제33권4호
• /
• pp.1447-1454
• /
• 2013

본 연구에서 선형분산관계식의 순환관계를 이용하여 Kelvin (1887)의 이론을 확장함으로써 심해뿐만 아니라 중간수심까지 적용 가능한 항주파의 파형을 예측하는 이론식을 개발하였다. 본 이론식은 일정수심 뿐만 아니라 완경사의 변수심에도 적용 가능하다. 본 연구의 해석해를 검증하기 위하여 FLOW-3D모형을 이용하여 수치실험을 수행하였다. 수치해와 이론해를 비교해본 결과, 본 연구의 이론해는 일정수심 뿐만 아니라 변수심에서도 항주파의 전파 양상을 잘 재현하였다. 평면 경사면 위로 배가 해안선과 나란하게 전파하는 경우 항주파의 전파 양상이 비대칭이 되었다. 즉, 수심이 얕은 곳은 굴절로 인하여 파향선이 해안선과 나란한 경향이 있고, 수심이 깊은 곳은 역굴절로 인하여 파향선이 해안선에 수직인 경향이 있었다.

• Wind and Structures
• /
• 제9권1호
• /
• pp.1-22
• /
• 2006

The response characteristics and suppression of flow-induced vibrations of rectangular prisms with various width-to-depth ratios were experimentally investigated. The prisms were rigid and elastically mounted at both ends to enable constrained torsional vibrations only. The present study focused on torsional vibrations, one of the three types of flow-induced vibrations generated in a rectangular prism. First, the response characteristics of torsional vibrations generated in rectangular prisms were investigated by free-vibration tests. It was found that the response characteristics of torsional vibrations generated in rectangular prisms could be classified into six patterns depending on the width-to-depth ratio. Next, the response characteristics of torsional vibrations observed in the free-vibration tests were reproduced by forced-vibration tests, and the mechanisms by which the three types of flow-induced vibrations, low-speed torsional flutter, vortex excitation and high-speed torsional flutter, are generated in the rectangular prisms were elucidated on the basis of characteristics of fluid forces and visualized flow patterns. Experiments were also carried out to establish an effective method for suppressing flow-induced vibrations generated in the rectangular prisms, and it was found that low-speed torsional flutter and high-speed torsional flutter could be suppressed by placing a small normal plate upstream of the prism, which results in suppression of the alternating rolling-up of the shear layers separating from the leading edges of the prism. It was also found that vortex excitation could be suppressed by placing a splitter plate downstream of the prism, which results in suppression of the generation of wake vortices.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.99-105
• /
• 2001

The purpose of this study is to investigate the effects of pending depth treatment on water balance in paddy fields. The pending depth treatments were very shallow, shallow and deep. The experimental plots were three $80m{\times}25m$ rectangular plots. Daily values of rainfall amount, pending depth, irrigation water, drainage water, evapotranspiration, infiltration, and piezometeric head were measured in the field. The pending depth was continuously observered by water level logger during the growing season. The ET was measured in 1m diameter PVC lysimeters. Irrigation water volume was measured by 75m pipe flow meter and the drainage water volume was measured by 25mm and 75mm pipe flow meters and a recording Parshall fulume. PVC pipe piezometers with 12mm diameter were used. The results of the water balance showed that irrigation water of 881.1mm, 735.4mm, and 532.6mm in very shallow, shallow, and deep pending, respectively. The effective rainfall was 182.6mm(44.6%), 254.7mm(62.2%), and 188.6mm(46.0%) in very shallow, shallow, and deep pending, respectively. The results show that the shallow pending depth looks the best of the three treatments.

• 한국수자원학회논문집
• /
• 제35권6호
• /
• pp.729-736
• /
• 2002

개수로의 설계에 있어서 등류수심의 산정은 가장 기본적인 요건이며, 인공수로를 구축할 경우 일반적으로 최량 수리단면은 가장 경제적인 단면이 된다. 따라서 최량 수리단면의 등류수심 산정은 거의 모든 수로 설계의 핵심적인 요소라 할 수 있다. 개수로 마찰력을 산정하기 위하여 일반성이 확보된 지수형 마찰계수 산정식을 도입하였다. 삼각형, 사각형 및 제형 등 거의 모든 형태의 수로에 대한 등류수심의 산정을 위하여 형식이 통일되고 양해적으로 해석이 가능한 산정식을 도출하였다. 또한 이들 등류수심 산정식은 관로설계에서 도출된 관경 산정식과 형식이 일치함을 확인하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 추계 학술대회논문집
• /
• pp.139-143
• /
• 2003

In this study the numerical analyses on cavity flow in supersonic flow field are conducted. According to the length-to-depth ratio of cavity, the shear layer is changed, consequently influencing on vortex structure inside the cavity. Especially in case the fluid flow outside cavity impinges inside the cavity, the oscillation of the cavity flow is identified. Another result is that though the cavity flow shows the unsteadiness, characteristics of cavity flow can be represented by pressure coefficients converged.