• 드라이브 ㆍ 컨트롤
• /
• 제17권2호
• /
• pp.55-62
• /
• 2020

There are two types of IMV for MCV, the spool type and the poppet type. The spool type is used in the existing excavator MCV and easily meets large-capacity flow conditions, but has a flow force problem which affects the spool control. The poppet type stably blocks the flow and has excellent rapid response. However, the larger the capacity, the larger the diameter of the poppet needed, requiring a strong spring to withstand the oil pressure. In this study, a bi-directional three-stage IMV for MCV that can be used in medium and large hydraulic excavators was proposed. This is a poppet type, enabling bi-directional flow control and resolves the problem of proportional solenoid suction force limitation. To investigate the validity of the proposed valve, the system was mathematically modeled and the static and dynamic characteristics were investigated through the simulation using commercial software. It has been concluded that the reverse flow is possible in a regeneration circuit and that the proposed IMV can be used to perform various excavation modes.

• 한국환경과학회지
• /
• 제21권4호
• /
• pp.471-478
• /
• 2012

In this study, the flow characteristic analysis at the curved-channel of the actual channel section is compared and reviewed using the 2D RMA-2 model and the 3D FLOW-3D model. the curve section with curve rate 1.044 in the research section is analyzed applying the frequency of he project flood of 100 years. According to the result, the issue for the application of the FLOW-3D Model's three-dimensional numeric analysis result to the actual river is found to be reviewed with caution. Also, application of the 3D model to the wide basin's flood characteristic is determined to be somewhat risky. But, the applicability to the hydraulic property analysis of a partial channel section and the impact analysis and forecast of hydraulic structure is presumed to be high. In addition, if the parameters to reflect the vegetation of basin and the actual channel, more accurate topological measurement data and the topological data with high closeness to the current status are provided, the result with higher reliability is considered to be drawn.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.82-85
• /
• 2008

액체로켓엔진에서 고주파 연소불안정의 제어를 위해 연소 안정화 장치인 음향공을 적용하여, 제한된 공간에서 유동장의 특성과 설계인자에 따른 감쇠효과를 연구하였다. 연소 불안정을 모사하기 위하여 제한된 공간에 압력 진동 장치를 이용하여 공진을 발생시켜, 음향공의 장착에 따른 감쇠 효과를 측정하였다. 유동장의 특성중 하나인 유속을 변화시키기 위하여 유량을 변화시켰으며, 설계인자로는 음향공 오리피스의 직경과 길이를 변화시켜 연구를 수행하였다. 유동장 하에서의 음향공 장착에 따른 감쇠효과를 확인 하였으며, 오리피스 길이와 직경이 작을 경우 유속 증가에 따라서 음향공의 튜닝이 오른쪽(고주파수)으로 이동하는 현상을 확인하였다.

• 산업경영시스템학회지
• /
• 제20권44호
• /
• pp.81-92
• /
• 1997

The purpose of this paper is to develop a method of paramatric analysis that can be applied to an optimal solution of a maximum flow problem. We first define the transformed network corresponding to a given network. In such a network, we conduct paramatric analysis by determining changes in the optimal solution precipitated by changes in the capacity as the arc capacity varies from 0 to infinite. By this method we can easily calculate not only the characteristic region where the given optimal solution remains unchanged, but also the characteristic region where the value of the maximal flow gradually increases or decreases. The proposed method is demonstrated by numerical example.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.990-994
• /
• 2004

This paper presents a method to predict the transient characteristic of the air lubricated slider head in a hard disk drive by using optimization technique. The time dependent modified Reynolds equation based on the molecular slip flow approximation equations was used to describe the fluid flow within the air bearing and the implicit finite difference scheme is applied to calculate the pressure distribution under the slider head. The exhaustive search combined with the Broyden-Fletcher-Goldfarb-Shanno method were employed to obtain optimum design variables which are taper angle, rail width and taper length in order to keep the forces and moments acting on the slider head in dynamic equilibrium. The results show that the optimal head slider of the magnetic head has good stability characteristic that can reach the steady state within 0.5 microsecond.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.265-268
• /
• 2003

In the extrusion process, the working material is forced to flow through a die with the desired profile. In general, the width of an extruded section is limited to about an inch less than the diameter of the round billet. But through the lip die, material is spreaded to produce a wider extruded section than the diameter of round billet. In this study, the extrusion process of an aluminum plate using the lip die is investigated. The width of the extruded plate is 450mm that is formed from the round billet with a diameter of 250mm. The flow characteristic through the lip die is considered to produce the wide-extruded plate with a small billet using rigid plastic FE analysis. Based on the result of FE analysis, new designs of lip die are proposed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.311-318
• /
• 2001

A three-dimensional numerical analysis of the flow and heat transfer characteristic of wood-flour-filled polypropylene melt in an extrusion die was carried out Used for this analysis were Finite Concept Method based on FVM, unstructured grid and non-Newtonian fluid viscosity model. Temperature and flow fields are closely coupled through temperature dependent viscosity and viscous dissipation. With large Peclet, Nahme, Brinkman numbers, viscous heating caused high temperature belt near die housing, Changing taper plate thickness and examining some predefined parameters at die exit investigated the effect of taper plate on velocity and temperature uniformities. In the presence of taper plate, uniformity at die exit could be improved and there existed an optimum thickness to maximize it.

• 대한산업공학회지
• /
• 제23권4호
• /
• pp.825-833
• /
• 1997

The purpose of this paper is to develop a method of postoptimality analysis that can be applied to an optimal solution of a maximum flow problem. We first use the transformed network corresponding to a given network. In such a network we conduct postoptimality analysis by determining changes in the optimal solution precipitated by changes in the capacity as the arc capacity varies from 0 to infinite. By this method we can easily calculate not only the characteristic region where the given optimal solution remains unchanged, but also the characteristic region where the value of the maximal flow gradually increases or decreases. The proposed method is demonstrated by numerical example.

• 신재생에너지
• /
• 제2권2호
• /
• pp.81-85
• /
• 2006

The output performance characteristics for surveyed sites were analyzed, using developed model. It consists of two main parts, the deciding flow duration characteristic of river and performance prediction model to estimate the output characteristics of small hydropower plants. As a result, It was found that the flowrate concerning with 25% of time ratio on flow duration curve can be selected to design flowrate of small hydropower plants, and the output characteristics of small hydropower plants having overflow dam are different from large scale hydropower plants.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.921-926
• /
• 2001

The link for the Superconducting Flux Flow Transistor (SFFT) which is based on the flux flow has been fabricated by the ICP etching methods. The channel width and the thickness of the SFFT were a 3 ${\mu}$m and about 300 nm, respectively. The superconducting characteristic of the link was measured by the x-ray diffraction and the E.D.S.. The SFFT etched by ICP showed an I-V characteristic like the three terminal transistor.