• 한국항공우주학회지
• /
• 제36권9호
• /
• pp.825-834
• /
• 2008

고 받음각에서의 방향 안정성 향상을 위한 chine 형상 최적화를 수행하였다. Super ellipse equation을 통하여 다양한 형태의 chine 형상을 생성하고, 3차원 Navier-Stokes 방정식을 이용하여 방향안정성 및 고받음각에서의 공력 특성을 분석하였으며, 가장 높은 방향 안정성을 갖는 형상을 기본형상으로 선정하였다. 파리미터를 이용한 기본형상의 곡면 변형을 통하여 높은 방향 안정성 및 양항비를 동시에 만족하는 최적형상 도출을 위하여, 반응면을 구성하고 가중치를 도입하고 양항비를 구속조건으로 하는 방향안정성 최적화 문제를 수행하였다. 본 연구를 통하여 고받음각에서 chine형상의 공력특성을 파악하여 강한 와류를 발생시키는 chine 형상이 방향안정성에 도움이 된다는 것을 확인할 수 있었으며 최적화를 통해 기본형상보다 방향안정성이 약 29% 향상되는 결과를 얻었다. 또한 파라미터 기반 형상 생성기법과 근사최적화 기법의 연동을 이용한 형상최적설계 과정을 초음속, 고받음각 유동의 chine 형상설계에 적용하여 그 효율성을 확인하였다.

• 한국항공우주학회지
• /
• 제30권1호
• /
• pp.1-8
• /
• 2002

자유류 속도가 40 m/sec 이고 날개의 뿌리시위에 기준한 레이놀즈수가 1.76${\times}$10$^6$인 상태에서 옆미끄럼이 삼각 날개 와류에 미치는 영향을 실험적으로 연구하였다. 받음각 범위는 16$^{\circ}$에서부터 28$^{\circ}$까지 이었으며 옆미끄럼각은 0$^{\circ}$, -10$^{\circ}$, 그리고 -20$^{\circ}$이었다. 옆미끄럼각은 바람쪽과 바람 반대쪽 와류 모두의 강도를 감소시키고, 바람쪽 와류의 붕괴를 촉진시킴이 관찰되었다. 옆미끄럼각 -10$^{\circ}$에서 바람 반대쪽의 와류는 받음각이 증가함에 따라 그 강도가 증가하였다. 이와 같은 옆미끄럼 조건에서 날개 와류의 비대칭적인 발달과 붕괴는 삼각 날개의 롤링모멘트를 어느 특정한 높은 받음각에서 급격히 바뀌게 할 수 있으며, 이는 일종의 롤링 모멘트 불안정성으로 간주할 수 있다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.433-438
• /
• 2002

The flow field around a symmetrical airfoil in a uniform flow under the generation of noise was numerically studied and compared with experimental datum. The numerical simulation was carried out by LES which employs a deductive dynamic model as subgrid-scale model. The result of an attack angle of $6^{\circ}$ indicate that the discrete frequency noise is generated when the separated laminar flow reattaches near the trailing edge of the pressure side and the turbulent boundary layer is formed over the suction side of the airfoil near the trailing edge. The periodic behavior of vortex formation was observed around the trailing edge and it persists further downstream in the wake. The frequency of the vortex formation in the wake was consistent with that of the discrete frequency noise.

• 한국자동차공학회논문집
• /
• 제9권2호
• /
• pp.84-91
• /
• 2001

To investigate the aerodynamic characteristics of the on a road vehicle, experimenrs were performed at an Atmospheric Boundary Layer Wind Tunnel. The scaled model of an automobile with 1 : 3 scaling ratio was used. The Reynolds number based on the free stream velocity and model length was $7.93{\times}10^5$. The influence of crosswind to the stability of automobile was investigated by the pressure distribution measurements and flow visualization studies. with the variation of the angle of attack, the change in pressure coefficient depends highly on the flow separation regimes. The experimental and numerical results are compared and found to be in good agreements.

• 한국유체기계학회 논문집
• /
• 제2권1호
• /
• pp.73-80
• /
• 1999

Leakage vortices formed new blade tip causes an increase of total pressure loss near the casing endwall region and as a result, the efficiency of rotor decreases. The reduction of rotor efficiency is related to the size of the tip clearance. In this study, the three-dimensional flowfields in an axial flow rotor were calculated by varying the tip clearance under various flow rates, and the numerical results were compared with experimental ones. The effects of tip clearance and attack angle on the leakage vortex and overall performance, and the loss distributions were investigated through numerical calculations. In this study, tip leakage flow rate and total pressure loss by tip clearance were evaluated using numerical results and approximate equations were presented to evaluate the reduction of rotor efficiency by tip leakage flow.

• 한국군사과학기술학회지
• /
• 제18권4호
• /
• pp.415-422
• /
• 2015

The flow field structures of dual jet-in-cross-flow were examined experimentally for in-lined perforated damage holes configuration using particle image velocimetry. Ensemble averaged in-plane velocity and vorticity data in the jet were determined to study the mean jet structure. Jets are formed by pressure differences between upper and lower airfoil surface. The flow structure of vicinity of the thru holes consist of a vortical structure that wrap around the jets like a horseshoe and develop further downstream through a pair of stream-wise vortices. The shape, size and location of the horseshoe vortex were found to be dependent on the angle of attack. In spite of the existence of battle damage holes, the effect on the control force was insignificant when the damage size was not large enough.

• 해양환경안전학회지
• /
• 제27권7호
• /
• pp.1059-1066
• /
• 2021

우리나라는 해상활동의 중요성이 크며, 산업화에 따른 이상기후 현상 등을 규명하기 위해 육상에 많은 자동기상 관측설비를 운영 중이지만 해상에서는 그 수가 매우 부족하다. 또한, 해양안전정보 구축 등을 위해 해양조사선을 운영 중이나 접근이 어려운 곳이 많고 높은 운영비용이 요구된다. 따라서 다양한 해양관측 등이 가능한 소형무인화선박의 개발이 필요하다. 한편 소형 무인화 선박에서 세일(Sail)은 항해 성능에 큰 영향을 미치므로 이에 대한 많은 연구가 진행되고 있다. 본 연구에서는 기존 에어포일 형상보다 높은 공기역학적 성능을 갖는 것으로 알려진 트윈커브세일(Twin curvy sail)의 설계변수인 캠버(Camber)효과에 대해 검토하였다. 5 종류의 캠버에 대해 유동해석 결과, 캠버 크기가 9 %일 때 가장 높은 양력계수를 나타내었다. 트윈커브세일의 경우 Port sail과 Starboard sail의 상호작용에 의해 받음각 23°에서 가장 높은 양력계수를 갖고, Port sail의 경우 받음각 20°에서 가장 높은 양력계수를 Starboard sail의 경우 받음각 15°에서 가장 낮은 양력계수를 나타내었다. 또한, 트윈커브세일은 모든 받음각에서 에어포일 형상인 NACA 0018보다 높은 양력계수를 나타내었다.

• 한국군사과학기술학회지
• /
• 제10권4호
• /
• pp.12-19
• /
• 2007

In this study, nonlinear flow-induced vibration(flutter) analyses of a 2-DOF launch vehicle airfoil have been conducted in supersonic and hypersonic flow regimes. Advanced aeroelastic analysis system based on computational fluid dynamics and computational structural dynamics is successfully developed and applied to the present analyses. Nonlinear unsteady aerodynamic analyses considering strong shock wave motions are conducted using inviscid Euler equations. Aeroelastic governing equations for the 2-DOF airfoil system is solved by the coupled integration method with interactive CFD and CSD computation procedures. Typical wedge type airfoil shapes with initial angle-of-attacks are considered to investigate the nonlinear flutter characteristics in supersonic(15). Also, the comparison of detailed aeroelastic responses are practically presented as numerical results.

• 한국군사과학기술학회지
• /
• 제20권1호
• /
• pp.81-89
• /
• 2017

This study investigates store separation characteristics of an unmanned aerial vehicle having generic stealth configuration over unsteady flow of an internal bay. Free-drop wind tunnel tests are conducted to simulate bomb releases from an internal weapons bay while high-speed camera images are taken. The images are analyzed to examine the effects of flow velocity, angle of attack, flap deflection and the ejector force application on the store separation trajectories. For the free-drop wind tunnel tests, Froude Scaling is applied to match the dynamic similarity for the bomb model, and the ejector force is simulated by using small pneumatic cylinders. The results indicate that the test bomb model safely separates from the internal bay at the given test conditions and configurations. It is also observed that the effects of the flow velocity and ejector force application have greater impacts on the separation trajectories than those of angle of attack and flap deflection.

• 대한기계학회논문집B
• /
• 제28권3호
• /
• pp.338-348
• /
• 2004

The present study is conducted to investigate the effect of rib arrangements on an impingement/effusion cooling system with initial crossflow. To simulate the impingement/effusion cooling system, two perforated plates are placed in parallel and staggered arrangements with a gap distance of 2 times of tile hole diameter. Initial crossflow passes between the injection and effusion plates, and the square ribs (3mm) are installed on the effusion plate. Both the injection and effusion hole diameters are 10mmand Reynolds number based on the hole diameter and hole-to-hole pitch are fixed to 10,000 and 6 times of the hole diameter, respectively. To investigate the effects of rib arrangements, various rib arrangements, such as 90$^{\circ}$transverse and 45$^{\circ}$angled rib arrangements, are used. Also, the effects of flow rate ratio of crossflow to impinging jets are investigated. With the initial crossflow, locally low transfer regions are formed because the wall jets are swept away, and level of heat transfer rate get decreased with increasing flow rate of crossflow. When the ribs are installed on the effusion plate, the local distributions of heat/mass transfer coefficients around the effusion holes are changed. The local heat/mass transfer around the stagnation regions and the effusion holes are affected by the rib positions, angle of attack and rib spacing. For low blowing ratio, the ribs have adverse effects on heat/mass transfer, but for higher blowing ratios, higher and more uniform heat transfer coefficient distributions are obtained than the case without ribs because the ribs prevent the wall jets from being swept away by the crossflow and increase local turbulence of the flow near the surface. Average heat transfer coefficients with rib turbulators are approximately 10% higher than that without ribs, and the higher values are obtained with small pitch of ribs. However, the attack angle of the rib has little influence on the average heat/mass transfer.