• Magazine of the Korean Society of Agricultural Engineers
• /
• v.24 no.1
• /
• pp.23-30
• /
• 1982

The aim of this report is to analyze the Occurring rate of damage at each region of head works and to clear its damaged mechanism, centering around the destroyed situations of head works along both Musim and Bochong Rivers suffered from the storm flood occurred on July 22, 1980. The results obtained from the investigation of 25 head works taken for samples are summarized as follows. 1. The occurring rate of damage at each region of head works showed the largest number of 100 percentage in the revetment and protected riverbed work respectively, in the order of the next largest number, 68 percentage in weir body, 56 percentage in apron and 36 percentage in bank. 2. The destructive damage of revetment influenced largely on sweeping bank away, and destructive sufferings of weir body and protected bed work affected on the destructi on of apron, otherwise the destructive sufferings of apron reversely also acted on the- destruction of weirbody and protected bed work. In other hand, partial damage of weir body at the side of revetment is largely influenced by destructive sweeping away of bank. 3. It was showed that the destructive phenomena of weir body occurred largely at the part of concentrated flow and also had a deep relation with scoring by concentrated flow around upstream foundation of weir. 4. The suffered region of revetment is the down stream part just near weir body and the degree of damage is more severe at the curved part of bank that center of flow is concentrated.

• Journal of Power System Engineering
• /
• v.4 no.3
• /
• pp.40-47
• /
• 2000

The turbulent flow with wake, reattachment and recirculation flow is very important from the viewpoint of engineering. But that is still difficult because of especially the unsteady problems which are related with the vehicle dynamics and the aerodynamics noise. This paper evaluate LES that can analyze about all fluid flow region including the laminar, transition and turbulent. So we compare the results of LES with those of PIV measurement and Reynolds averaging models. In conclusion, LES predicts flow behavior better than Reynolds averaging models.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.19 no.4
• /
• pp.459-479
• /
• 2015

Two-dimensional steady laminar natural convection around a heat conducting and generating solid body inside a square enclosure with different thermal boundaries is performed. The mathematical model is governed by the coupled equation of mass, momentum and energy. These equations are discretized by finite volume method with power-law scheme and solved numerically by SIMPLE algorithm with under-relaxation technique. Effect of Rayleigh number, temperature difference ratio of solid-fluid, aspect ratio of solid-enclosure and the thermal conductivity ratio of solid-fluid are investigated numerically for Pr = 0.7. The flow and heat transfer aspects are demonstrated in the form of streamlines and isotherms respectively.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.1
• /
• pp.15-23
• /
• 1998

Characteristics of turbulence beneath the free surface around a blunt bow are numerically-investigated. Three dimensional wavier-Stokes and continuity equations are solved for the simulations.. The Large Eddy Simulation(LES) with the external disturbance is performed to simulate the turbulent free surface flow called sub-breaking wave. The result shows that the free surface fluctuates beyond a certain critical condition and the characteristics of the fluctuation are similar to the turbulent boundary layer flow around a solid body.

• 한국전산유체공학회:학술대회논문집
• /
• 1997.10a
• /
• pp.81-85
• /
• 1997

The Computer code KAIST-ADD LUFUNS has been developed to solve 3D compressible turbluent flow. This method employs Harten-Yee's modified upwind scheme in the explicit part and Steger-Warming Splitting in the implicit part. Flow past RAE wing-body aircraft has been computed for three different flow conditions. The result have shown good comparision with the experimental data. Baldwin-Lomax turbluence model is used for this computer code.

• Wind and Structures
• /
• v.39 no.1
• /
• pp.31-45
• /
• 2024

This paper examines the flow characteristics around an inclined prism with a U-shaped cross-section ("U-profile") and investigates the connection between the flow and flow-induced vibrations. The study employs a combined approach that involves wind tunnel experiments and computational fluid dynamics (CFD) using an unsteady Reynolds-averaged Navier-Stokes (RANS) turbulence model. Distinct vortex formation patterns are observed in the flow field surrounding the stationary inclined profile. When the cavity of the profile faces away from the incoming flow, large vortices develop behind the profile. Conversely, when the cavity is oriented towards the oncoming flow, these vortices form within the cavity. Notably, due to the slow movement of these large vortices through the cavity, the frequency at which vortices are shed in the negative inclination case is lower compared to the positive inclination, where they form in the wake. Wind tunnel experiments reveal an intermittent transition between the two vortex formation patterns at zero inclination. Large vortices sporadically emerge both in the cavity and behind the profile. The simulation results demonstrate that when these large vortices occur at a frequency close to the structure's natural frequency, they induce prominent pitch vibrations. This phenomenon is also sought after and presented in coupled vibration experiments. Additionally, the simulations indicate that when the natural frequency of the structure is considerably lower than the vortex shedding frequency, this type of vibration can be observed.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.2
• /
• pp.36-46
• /
• 2011

A two-dimensional floating body with a moon pool under forced heave motion, including a piston mode, is numerically simulated. A dynamic CFD simulation is carried out to thoroughly investigate the flow field around a two-dimensional moon pool over various heaving frequencies. The numerical results are compared with experimental results and a linear potential program by Faltinsen et al. (2007). The effects of vortex shedding and viscosity are investigated by changing the corner shapes of the floating body and solving the Euler equation, respectively. The flow fields, including the velocity, vorticity, and pressure fields, are discussed to understand and determine the mechanisms of wave elevation, damping, and sway force.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.5
• /
• pp.8-13
• /
• 2004

In order to better understand the characteristics of the flow field around the submerged hydrofoil of finite span with high speed and shallow submergence. a numerical code which can solve the flow around a fast lifting body under the free surface was developed and used to obtain various interesting features of the flow. The code was based on the panel method of Hess( 1972), and the free surface condition was linearized to conform with the assumption of the high Froude number. It is shown that the effect of the change of submerged depth. angle of attack and aspect ratio upon the sectional lift coefficient is rather significant for the case of the chosen example wing, which has the rectangular planform. Since Lee(2002)'s theoretical results were for the wing of elliptical planform, the direct comparison of the two results was not possible. It seems that more computational results are in need to compare the theoretical and the numerical prediction in detail.

• Journal of Advanced Research in Ocean Engineering
• /
• v.3 no.4
• /
• pp.193-203
• /
• 2017

This study investigated the steady-flow effects present in the numerical computation of the resistance added to a ship in waves. For a ship advancing in the forward direction, a time-domain 3D Rankine panel method is applied to solve the ship motion problem, and the added resistance due to waves is calculated using a near-field method, with the direct integration of the second-order pressure on the hull surface. In the linear potential theory, the steady flow is approximated by the basis potential of a uniform flow or double-body flow in order to linearize the boundary conditions. By applying these two different linearization schemes, the coupling effects between steady and unsteady solutions were examined. Furthermore, in order to analyze the steady-flow effects on the hull geometry, the computation results for two realistic hull forms, a KVLCC2 tanker and DTC containership, were compared. In particular, the mj term, which represents the coupling effects under the body boundary condition, was evaluated considering the geometry of a non-wall-sided ship. Lastly, the characteristics of the linearization schemes were examined in relation to the disturbed waves around a ship and the components of added resistance.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.10a
• /
• pp.202-206
• /
• 2001

A three dimensional incompressible Navier-Stokes code based on the third derivative upwind is employed to simulate the flow around the underwater vehicle advancing on the calm water. Computations are carried out in the range of Froude numbers 0.4 to 0.7. The wave resistance, lift, moment and the pressure distribution on the body are calculated. Computations are performed in a rectangular grid system based on the Marker & Cell method. For validation, computation results are compared with existing experimental results.