• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.4
• /
• pp.11-22
• /
• 2019

The objective of this study was to improve the cross-sectional area and height estimation method using stream width. Stream water levels should be calculated together to simulate inundation of agricultural land. However, cross-sectional survey data of small rural rivers are insufficient. The previous study has developed regression equations between the width and the cross-sectional area and between the width and the height of stream cross-section, but can not be applied to a wide range of stream widths. In this study, cross-sectional survey data of 6 streams (Doowol, Chungmi, Jiseok, Gam, Wonpyeong, and Bokha stream) were collected and divided into upstream, midstream and downstream considering the locations of cross-sections. The regression equations were estimated using the complete data. $R^2$ between the stream width and cross-sectional area was 0.96, and $R^2$ between width and height was 0.81. The regression equations were also estimated using divided data for upstream, midstream and downstream considering the locations of cross-sections. The range of $R^2$ between the stream width and cross-sectional area was 0.86 - 0.91, and the range of $R^2$ between width and height was 0.79 ? 0.92. As a result of estimating the cross-sections of 6 rivers using the regression equations, the regression equations considering the locations of cross-sections showed better performance both in the cross-sectional area and height estimation than the regression equations estimated using the complete data. Hydrologic Engineering Center - River Analysis System (HEC-RAS) was used to simulate the flood stage analysis of the estimated and the measured cross-sections for 50-year, 100-year, and 200-year frequency floods. As a result of flood stage analysis, the regression equations considering the locations of cross-sections also showed better performance than the regression equations estimated using the complete data. Future research would be needed to consider the factors affecting the cross-sectional shape such as river slope and average flow velocity. This study can be useful for inundation simulation of agricultural land adjacent to an unmeasured stream.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.7 no.1
• /
• pp.1-12
• /
• 2004

The summer distribution of $Cha-{alpha}$ and physical processes for simulating outbreak region of red tide were estimated by the Eco-Hydrodynamic model in Chinhae Bay. As a result of simulation of surface residual currents, the southward flow come in contact with the northward flow at the inlet and western part of bay in case of windlessness and below wind velocity 2 m/sec. As wind velocity increases, the velocity and direction of currents were fairly shifted. The predicted concentration of $Cha-{alpha}$ exceeded 20 mg/㎥ in Masan and Haengam Bays, and most regions were over 10 mg/㎥, which meant the possibility of red tide outbreak. From the results of the contributed physical processes to $Cha-{alpha}$, accumulation sites were distributed at the northern part of Kadok channel, around the Chilcheon island, the western part of Kajo island and some area of Chindong Bay. On the other hand, inner parts of the study area such as Masan Bay were estimated as the sites of strong algal activities. Masan and Haengam Bay are considered as the initial outbreak region of red tide by the modeling and observed data, and then red tide expanded to other areas such as physical accumulation region and western inner bay, as depending on environmental variation. The increase of wind velocity led to decrease of $Cha-{alpha}$ and enlargement of accumulation region. The variation of intensity of radiation and sunshine duration caused to rapidly fluctuation of $Cha-{alpha}$: however, it was not largely affected by the variation of pollutant loads from the land only.

• Journal of Wetlands Research
• /
• v.13 no.3
• /
• pp.385-394
• /
• 2011

In this study, optimal parameters of diffusion-analogy GIUH were calculated by separating channel and hillslope from drainage structures in the basin. Parameters of the model were composed of channel and hillslope, each velocity($u_c$, $u_h$) and diffusion coefficient($D_c$, $D_h$). Tanbu subwatershed in Bocheong river basin as a target basin was classified as 4th rivers by Strahler's ordering scheme. The optimization technique was applied to the SCE-UA, the estimated optimal parameters are as follows. $u_c$ : 0.589 m/s, $u_h$ : 0.021 m/s, $D_c$ : $34.469m^2/s$, $D_h$ : $0.1333m^2/s$. As a verification for the estimated parameters, the error of average peak flow was about 11 % and the error of peaktime was 0.3 hr. By examining the variability of parameters, the channel diffusion coefficient didn't have significant effect on hydrological response function. by considering these results, the model is expected to be simplified in the future.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.399-402
• /
• 2006

The purpose of this study is to propose a method for protecting injector face for prolonged combustion time and heat flux measurement technique at the injector face. To obtain basic design data and verify the performance of the proposed method, a regenerative cooling injector face was designed and manufactured for the hot firing test. Due to the safety reason, hot fire test were performed 3, 10, 30, 60 and 120 seconds time step. The discrepancy between analytical results adapting to combustion and nozzle and experimental results is believed due to the over estimation of the convection heat transfer calculation. for the injector face, flow velocity is almost negligible, therefore radiation is more important than convection. Consecutive hot firing test during 10, 30, 60 and 120 seconds combustion time shows good repeatability.

• Journal of Korea Multimedia Society
• /
• v.3 no.4
• /
• pp.380-388
• /
• 2000

In computing the optical flow, Horn and Schunck's method which is a representative algorithm is based on differentiation. Therefore it is difficult to estimate the velocity for a large displacement by this algorithm. In this paper, we propose a method for estimating nonuniform motion from sequential images which is based on integral brightness constancy constraints. The equations which transform a source image to a target image are expressed as a function of the displacement field. If marginal effects can be neglected, the form of the transformation integral transform or orthogonal expansion can be determined from the expansion coefficients of the two images. The apparent displacement field is then computed iteratively by a projection method which utilities the functional derivatives of the linearized moment equations. We demonstrate that the performance of the orthogonal function transform on the data set of large motion.

• International Journal of Fluid Machinery and Systems
• /
• v.2 no.4
• /
• pp.353-362
• /
• 2009

In the process of turbine modernizations, the investigation of the influences of water passage roughness on radial flow machine performance is crucial and validates the efficiency step up between reduced scale model and prototype. This study presents the specific losses per component of a Francis turbine, which are estimated by CFD simulation. Simulations are performed for different water passage surface roughness heights, which represents the equivalent sand grain roughness height. As a result, the boundary layer logarithmic velocity profile still exists for rough walls, but moves closer to the wall. Consequently, the wall friction depends not only on roughness height but also on its shape and distribution. The specific losses are determined by CFD numerical simulations for each component of the prototype, taking into account its own specific sand grain roughness height. The model efficiency step up between reduced scale model and prototype value is finally computed by the assessment of specific losses on prototype and by evaluating specific losses for a reduced scale model with smooth walls. Furthermore, surveys of rough walls of each component were performed during the geometry recovery on the prototype and comparisons are made with experimental data from the EPFL Laboratory for Hydraulic Machines reduced scale model measurements. This study underlines that if rough walls are considered, the CFD approach estimates well the local friction loss coefficient. It is clear that by considering sand grain roughness heights in CFD simulations, its forms a significant part of the global performance estimation. The availability of the efficiency field measurements provides an unique opportunity to assess the CFD method in view of a systematic approach for turbine modernization step up evaluation. Moreover, this paper states that CFD is a very promising tool for future evaluation of turbine performance transposition from the scale model to the prototype.

• Journal of Korean Society on Water Environment
• /
• v.33 no.6
• /
• pp.626-639
• /
• 2017

Based on an ecological monitoring in a Korean stream (Gapyeong), Habitat Suitability Index (HSI) of nine fish species was developed for three physical habitat factors : current velocity, water depth and substrate. The species were chosen based on their abundance and frequency in the fish community of the Gapyeong stream. The Weibull model was used as the probability density function to analyze the distribution and number of each fish species according to the three identified physical factors, which showed good results. This HSI equation has advantages because it statistically expresses habitat preferences of fish species simply and clearly. From that, we can quantitatively deduce the central tendency and variation of environmental factors for fish distribution. The selected fish species showed different preferences for each habitat factor respectively. Although there are some exceptions, the distribution and abundance of individual species of nektonic fish (Zacco koreanus, Zacco platypus, Microphysogobio longidorsalis and Pungtungia herzi) were positively skewed to deep water and fine substrate while riffle-benthic fish (Koreocobitis rotundicaudata and Coreoleuciscus splendidus) were normally distributed at the shallow and coarse substrate zone. It seems that the species showing the positively skewed distribution to the current, Z. koreanus, Z. platypus, M. longidorsalis and P. herzi have adapted themselves to the fast current and have expanded their niche.

• Geophysics and Geophysical Exploration
• /
• v.7 no.1
• /
• pp.62-69
• /
• 2004

The objective of this study is to estimate the distribution of a zone disturbed by excavation (EDZ) around tunnels that have been excavated at about 500 m depth in pre-Tertiary hard sedimentary rock. One of the most important tasks is to evaluate changes in the dynamic stability and permeability of the rock around the tunnels, by investigating the properties of the rock after the excavation. We performed resistivity and acoustic tomography using two boreholes, 5 m in length, drilled horizontally from the wall of a tunnel in pre-Tertiary hard conglomerate. By these methods, we detected a low-resistivity and low-velocity zone 1 m in thickness around the wall of the tunnel. The resulting profiles were verified by permeability and evaporation tests performed at the same boreholes. This anomalous zone matched a high-permeability zone caused by open fractures. Next, we performed resistivity monitoring along annular survey lines in a tunnel excavated in pre-Tertiary hard shale by a tunnel-boring machine (TBM). We detected anomalous zones in 2D resistivity profiles surrounding the tunnel. A low-resistivity zone 1 m in thickness was detected around the tunnel when one year had passed after the excavation. However, two years later, the resistivity around the tunnel had increased in a portion, about 30 cm in thickness, of this zone. To investigate this change, we studied the relationship between groundwater flow from the surroundings and evaporation from the wall around the tunnel. These features were verified by the relationship between the resistivity and porosity of rocks obtained by laboratory tests on core samples. Furthermore, the profiles matched well with highly permeable zones detected by permeability and evaporation tests at a horizontal borehole drilled near the survey line. We conclude that the anomalous zones in these profiles indicate the EDZ around the tunnel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1C
• /
• pp.8-16
• /
• 2012

In order for the support of the ETCS (Electronic Toll Collection System) model, which have been operated successfully till now, with multi-lane service, the wireless communication system of the multi-lane-supported ETCS based on RF-DSRC (Radio Frequency - Dedicated Short Range Communication) was used. In this paper, the SME algorithm attaching data flow and form into RFID communication technology was newly suggested to overcome technical problems on RF-DSRC communication system. In addition, in order to verify the SME algorithm, experiments based on ETCS and 900Mhz RFID were carried out. From the result of realization experiment of RFID dependent on the velocity and precision experiment of information inside of RFID, we can see that RFID is detected below 70Km/h and the precision of estimation is more than 90%.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.53-53
• /
• 2022

본 연구는 낙동강 상류에 위치한 안동댐 하류(4,565.7 km²)를 대상으로 1차원 물리적 서식처모형인 PHABSIM(Physical Habitat Simulation System)과 2차원 물리적 서식처 모형인 River2D를 이용하여 대표어종인 피라미에 대해 환경생태유량과 어류서식처 면적을 산정하였다. 두 모형의 구축을 위해 낙동강 하천기본계획보고서(2009)를 수집하여 하천단면과 수리학적 자료를 두 서식처모형에 적용하였다. 유속과 수위자료의 경우, 낙동강수문조사연보와 검보정된 HEC-RAS를 활용하여 갈수량 Q355(10.95 m³/sec)와 평수량 Q185(41.72 m³/sec)에서의 유속과 수위를 생성하여 적용하였다. 대표어종 선정을 위해 총 4회에 걸쳐 현장조사를 진행하였으며, 수집한 어종들에 대해 상대풍부도와 출현 개체수 분석결과 54.2%의 상대풍부도와 총 110개의 개체수를 나타낸 피라미(Z acco platypus)를 대표어종으로 선정하였다. 서식처 적합도 지수 HSI(Habitat Suitability Index)는 피라미 출현시기의 수심(Depth), 유속(Velocity) 그리고 하상재료(Substrate)를 조사하여 적립하였으며 수심은 0.4~0.6 m, 유속은 0.3~0.5 m/s, 하상재료는 모래(2.0 mm)~잔자갈(16.0 mm)일 때 HSI가 가장 적합한 것으로 분석되었다. PHABSIM을 이용하여 피라미에 대해 최적 환경생태유량 산정결과 20.0 m³/sec로 산정되었고, 모의한 30개 유량에 대해 평균 어류서식처 면적은31,905.3 m²/1,000m로 산정되었다. PHABSIM으로 산정된 환경생태유량과 River2D를 이용하여 하천유량이 Q355와 환경생태유량일 때의 공간분석을 실시하였다. Q355와 비교하여 환경생태유량일 때 유속과 수심 HSI에 대한 공간분포와 어류서식처 면적 또한 더 큰 것으로 분석되었다.