• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.4
• /
• pp.537-543
• /
• 2014

Three different granule powders of Citrus Hallabong were prepared with different ratios of fresh juice and citric acid (J10C3=10.0:3.08, J08C4=8.75:4.33, J07C5=7.5:5.58) at fixed quantities of juice powder (70%), pressed cake powder (10%), and additives (6.92%), and their physicochemical properties were measured and compared with targeted commercial product (CP). The moisture content of Hallabong granules (HG) was 5.08~5.44% (w/w), which was two times higher than that of CP. Titratable acidities increased with higher citric acid content and were 1.7~2.3 times lower in HG compared to that of CP. Soluble solids of HG increased with higher citrus juice content ($90{\sim}98^{\circ}Brix$) and were slightly lower than that of CP. Vitamin C contents of HG increased with higher citrus juice content and were 5.8~7.6 times lower than that of CP. In terms of color difference, L and b values of HG were higher while a value was lower than those of CP. Bulk and compaction densities of HG were 0.541~0.660 g/mL and 0.561~0.689 g/mL, respectively and were similar to those of CP. Water solubility and swelling capacity were 66.6~72.0% and 3.84~6.40 g/g, respectively, and were similar to those of CP. Hygroscopicity of HG after an hour of elapsed time was 1.6~1.8 times higher than that of CP. Sensory evaluation test showed that color, sweetness, and overall acceptance of HG were not significantly different from those of CP, whereas flavor and bitterness of HG were lower than those of CP. In conclusion, convenient food granules could be made with Citrus Hallabong juice and pressed cake, which is similar to the commercial product.

• Tuberculosis and Respiratory Diseases
• /
• v.53 no.5
• /
• pp.485-496
• /
• 2002

Background : Nonsteroidal anti-inflammatory drugs (NSAIDs) are useful in the chemoprevention of colon cancers. Continuous NSAID use results in a 40% to 50% reduction in the relative risk of colorectal cancer. The precise mechanism by which NSAIDs prevent and/or cause the regression of colorectal tumors is not known. Some investigators have reported that certain NSAIDs induce apoptosis and alter the expression of the cell cycle regulatory genes in some carcinoma cells when administered at a relatively high concentration. However, the possibility of NSAIDs application as chemopreventive agents in lung cancers remains to be elucidated. To address this question, the human lung cancer cell line NCI-H1299 was used to investigate whether or not NSAIDs might induce the apoptotic death of NCI-H1299 cells. Methods : A viability test was carried out using a MTT assay. Apoptosis was measured by flow cytometric analysis and unclear staining(DAPI). The talytic activity of the caspase family was measured by the fluirigenic cleavage of biosubstrates. To define the mechanical basis of apoptosis, western blot was performed to analyze the expression of the death substrates(PARP and ICAD). Results : NaSaL significantly decreased the viability of the NCI-H1299 cells, which was revealed as apoptosis characterized by an increase in the $subG_0/G_1$ population and unclear fragmentation. The catalytic activity of caspase-3 protease began to increase after 24 Hr and reached a peak 30 Hr after treatment with 10 mM NaSaL. In contrast, caspase-6, 8, and 9 proteases did not have a significantly altered enzymatic activity. Consistent with activation of caspase-3 protease, NaSaL induced the cleavage of the protease biosubstrate. Conclusion : NaSaL induces the apoptotic death of NCI-H1299 human lung cancer cells via the activation of caspase-3 protease.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.3
• /
• pp.87-95
• /
• 2003

Although extensive studies were conduced on hydrogen fermentation of organic wastewaters, little is known about biohydrogen production from organic solid wastes. The leaching-bed reactor treating food waste by heat-shocked anaerobic sludge was, therefore, operated at D of 2.1, 3.6, 4.5 and $5.5d^{-1}$ to find optimal D for hydrogen production. Successful operation of a reactor can be accomplished when it is operated at proper dilution rate (D). Operation at high D leads to the washout of biomass in the reactor while operation at low D leads to product inhibition due to the accumulation of excess VFA. These appear to limit the production of hydrogen to reach a higher level. All the reactors showed that, on day 1-3, hydrogen production was dominant and VFA concentration was higher than ethanol. Butyrate and acetate were major components of VFAs over the whole operation, though lactate was very high on day 1-2. Compared with other D values, D of $4.5d^{-1}$, resulted in higher butyrate/acetae (B/A) ratios during the fermentation. The trend of B/A ratios was similar to the hydrogen production, suggesting that butyrate formation favored hydrogen production. Ethanol increased significantly from day 4 when hydrogen Production stopped. It indicated that heat-shocked sludge was able to induce a metabolic flow from hydrogen-and acid-producing pathway to solvent-producing pathway. Operation at D of $4.5d^{-1}$ led to higher fermentation efficiency (58%) than those (51.5, 55.3 and 53.7%) at 2.1, 3.6 and $5.5d^{-1}$. The COD removed was convened to hydrogen (10.1%), VFA (30.9%), and ethanol (17.0%).

• Cartoon and Animation Studies
• /
• s.38
• /
• pp.177-194
• /
• 2015

This study that had been conducted two months by a research team of Pusan National University at the request of Korea Manwha Contents Agency in Dec. 2013 is about the statistical analysis on 'Korean Webtoon DB and its Flow Report' which resulted from the complete survey of Korean webtoons which had been published with payment in official media from early 2000 to 2013. Webtoon which means the cartoons published on web has become a typical type of Korean cartoons and has developed into a main industry since 2000s when traditional published cartoons had declined and social environments had changed. Today, it represents cultural contents in Korea. This study collected the webtoons officially published in media with payment, among Korean webtoons having been published from the early 2000s to Jan. Based on the collected data, it analyzed the general characteristics of webtoons, including cartoonists, the number of cartoons, distribution chart of each media, genre, and publication cycle. According to the data analysis and statistics, a great deal of Korean webtoons are still published in main portal websites, but their platform is being diversified and a webtoon's publication cycle tends to be shortened. In terms of genre, traditional popular genres, such as drama, comic, fantasy, and action, are still popular, and the genres of history, sports, and food are on the rise along with a social trend. Regarding webtoon application, such events as relay webtoon and brand webtoon, and a new type of webtoon featuring PPL commercialism appear. Such phenomena can realize the common profits of cartoonists, media, and ordering bodies, and are various trials to test the possibility of webtoons. In addition, what needs to pay attention on in the expansion of webtoons is increasing webtoons for adults. The study subjects are the webtoons published with payment, excluding free webtoons. However, this study failed to collect the webtoons published on the online websites already closed, and the lost information on cartoonists and their lost webtoons, and it is necessary to conduct a complete survey on all webtoons including free ones. Despite the limitations, this study is meaningful in the points that it categorized and analyzed Korean webtoons accoridng to official media, webtoons, cartoonists, and genres and that it provided a fundamental material to understand the current conditions of webtoons. It is expected that this study will be able to contribute to activating more research on webtoons and producing more supplementary data which will be used for the Korean cartoon industry and academia.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.12
• /
• pp.1087-1093
• /
• 2010

Autotrophic denitrification is known as an effective and economical alternative for heterotrophic denitrification using external carbon sources such as methanol. In this study, we evaluated design and operation parameters for a sulfur denitrification reactor (SDR) treating high strength nitrogen wastewater. The SDR was filled with spherical sulfur media in connected to a pilot-scale nutrient removal process (daily flow rate, $Q=18\;m^3/d$) using moving spongy media. Total nitrogen (TN) concentration of the final effluent was below the 7.0 mg TN/L because nitrate was additionally removed through autotrophic denitrificationin without adding alkalinity (initial alkalinity was $169.4{\pm}20.8\;mg$ $CaCO_3$/L). During the test period, 60~80% of nitrogen in the influent was removed even in low temperature (below $15^{\circ}C$). The alkalinity consumption for nitrate removal in SDR was $4.09{\pm}1.29$ g $CaCO_3/g$ ${NO_3}^-$-N, and the residual alkalinity of influent of SDR was higher than that of theoretical requirements for full conversion of nitrate. The consumption of sulfur was 943.8 g S/d and it was 2.4 times higher than theoretical value (400.1 g S/d) due to abrasion and loss of sulfur media in backwash, etc.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.173-185
• /
• 2018

Effects of three different types of dispersions and flow improving additives composed with fatty acid esters, fatty acid metal salts and amide compound on the vulcanization and the mechanical properties properties of rubber compounds of EPDM and carbon black as fillers. were investigated using Mooney viscometer, moving die rheometer, hardness tester, and universal test machine. The aging characteristics of vulcanized EPDM compounds were also investigated. The Mooney viscosity measured at $125^{\circ}C$ showed a tendency to decrease in the order of amide type> metal salt type > ester type additive. Scorch time showed little or no difference with the addition of ester or metal salt type additives, but the amide type additive shortened a scorch time more than one minute. Rheological measurement data obtained at $160^{\circ}C$ showed that the vulcanization time was faster for metal salt type and amide type additive systems. Delta torque values of EPDM compound increased with metal salt type and amide type additives, but slightly decreased with ester type additive. The tensile strength of the EPDM compound was greatly improved when an ester type additive was added, but the amide type or metal salt type additive had no significant effect. The elongation was significantly improved for metal salt type additive, while the rest were not significantly affected. The tear strength of the EPDM compounds increased with the addition of all kinds of additives, and it increased remarkably in the case of metal salt type additive. Hardness of the EPDM compounds was nearly same value regardless of additive types. The thermal aging of the EPDM blend at $100^{\circ}C$ for 24 h showed little change in the case of metal salt type or amide type additive, but the elongation tends to decrease by 10-20% for all EPDM compounds containing additives.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.9
• /
• pp.1171-1178
• /
• 2000

Objective : The purpose of the present study was to determine the appropriate time of clinical intervention by observing and analyzing the changes in the size of infarct, penumbra and cerebral edema and the extend of neurological deficit due to reperfusion damage according to time in a reversible cerebral ischemic model of reperfusing blood flow after inducing ischemia by maintaining middle cerebral artery occlusion for 2 hours(h) in rats. Methods : The rats were divided according to reperfusion time into control group(0 h reperfusion time) and experimental groups(0.5, 1, 2, 3, 4, 5, 6, 12, and 24 h of reperfusion time). Results : Changes in the size of infarction due to reperfusion damage were 0.93, 1.48 and 1.16% at 0.5, 1 and 2 h after reperfusion, respectively, and although a statistical significance was not present compared to 1.35% of the control group, damages increased drastically up to 6 h(6.64%), and the size increased were 6.65 and 6.78% at 12 and 24 h, respectively. Also there was no significant difference after 6 h up to 24 h in the size of infarction. In the areas where infarction occurred, reperfusion damage increased significantly with time in cortex than in subcortex. Accordingly, the size of penumbra area also showed a statistically significant decrease from 2 h up to 6 h after reperfusion, and 6 h after reperfusion, the area almost disappeared, becoming permanent infarction. Thus, reperfusion damage showed a significant increase from 2 h up to 6 h after reperfusion, and became steady thereafter. As for the mean ratio of the extend of cerebral edema, the control group and reperfusion 0.5 h group were 1.073 and 1.081, respectively ; up to 2 h thereafter, the ratio decreased to 1.01 but increased again with time ; and in reperfusion 12 h and reperfusion 24 h, the ratios were 1.070 and 1.075, respectively, showing similar size with that of control group. As for neurological deficit scores, the score of the control group was 2.67, that of reperfusion 2 h was 2, those of reperfusion 3 h and 6 h groups were 3.2 and 3.8, respectively, and those of reperfusion 12 h and 24 h groups were 4.2 and 4.6, respectively. Thus, as for the test results, the neurological deficit increased with time 2 h after reperfusion, and in reperfusion 12 and 24 h groups, almost all the symptoms appeared. Conclusion : As shown in these results, although the changes in the size of infarction due to reperfusion damage did not increase up to 2 h after reperfusion in the experimental groups compared to the control group, damage increased significantly thereafter up to 6 h, and the size remained about the same from 6 h to 24 h after reperfusion, becoming permanent infarction ; thus, the appropriate time of intervention according to the present study is at least 6 h before after maintaining reperfusion, including the time of cerebral artery occlusion.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.10
• /
• pp.1905-1919
• /
• 2000

The main motivation of this research is to develop an intelligent control strategy for Activated Sludge Process (ASP). ASP is a complex and nonlinear dynamic system because of the characteristic of wastewater, the change in influent flow rate, weather conditions, and etc. The mathematical model of ASP also includes uncertainties which are ignored or not considered by process engineer or controller designer. The ASP is generally controlled by a PID controller that consists of fixed proportional, integral, and derivative gain values. The PID gains are adjusted by the expert who has much experience in the ASP. The ASP model based on $Matlab^{(R)}5.3/Simulink^{(R)}3.0$ is developed in this paper. The performance of the model is tested by IWA(International Water Association) and COST(European Cooperation in the field of Scientific and Technical Research) data that include steady-state results during 14 days. The advantage of the developed model is that the user can easily modify or change the controller by the help of the graphical user interface. The ASP model as a typical nonlinear system can be used to simulate and test the proposed controller for an educational purpose. Various control methods are applied to the ASP model and the control results are compared to apply the proposed intelligent control strategy to a real ASP. Three control methods are designed and tested: conventional PID controller, fuzzy logic control approach to modify setpoints, and fuzzy-PID control method. The proposed setpoints changer based on the fuzzy logic shows a better performance and robustness under disturbances. The objective function can be defined and included in the proposed control strategy to improve the effluent water quality and to reduce the operating cost in a real ASP.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.1
• /
• pp.23-32
• /
• 2010

The capacity of natural purification was limited by the interruption of natural flow and the problems such as eutrophication were occurred by nutritive salts accumulation in stagnant stream. Moreover, the inflow of non-point sources causes non-degradable materials to increase in stagnant stream. In this study, an upflow biological activated carbon (BAC) biofilm process comprised of anoxic, aerobic 1, and aerobic 2 reactors were introduced for treatment of stagnant stream and SS, $BOD_5$, $COD_{Mn}$, $COD_{Cr}$, TN, and TP were monitored in the upflow BAC biofilm reactors with continuous cycling. In order to simulate stagnant stream, the lake water of amusement park and golf course were stored as influent in a tank of $2m^3$ and hydraulic retention time (HRT) was changed into 6, 4, and 2 hours. At HRT 4hr and the lake water of amusement park as influent, the removal efficiencies of SS, $BOD_5$, $COD_{Mn}$, $COD_{Cr}$, TN, and TP showed the best water quality improvement and were 69.8, 83.0, 91.3, 74.1, 74.7, and 88.9%, respectively. At HRT 4hr and the lake water of golf course as influent, the removal efficiencies of SS, $BOD_5$, $COD_{Mn}$, $COD_{Cr}$, TN and TP were 78.5, 78.0, 80.2, 74.9, 55.6 and 97.5%, respectively. As the results of polymerase chain reaction - denaturing gel gradient electrophoresis (PCR-DGGE), microbial community was different depending on influent type. Fluorescence in situ hybridization (FISH) showed that nitrifying bacteria was dominant at HRT 4 hr. The biomass amount and microbial activities by INT-DHA test were not decrease even at lower HRT condition. In this study, the upflow BAC biofilm process would be considered to the water quality improvement of stagnant stream.

• Tuberculosis and Respiratory Diseases
• /
• v.67 no.2
• /
• pp.88-94
• /
• 2009

Background: From November 2006, The national health insurance system in the Republic of Korea began to cover prescribed long-term oxygen therapy (LTOT) in patients with chronic respiratory insufficiency. This study examined the current status of LTOT after national health insurance coverage. Methods: Between November 1, 2006 and June 30, 2008, the medical records of patients who were prescribed LTOT by chest physicians were reviewed. The data was collected from 13 university hospitals. Results: 197 patients (131 male and 66 female) were prescribed LTOT. The mean age was 64.3${\pm}$13.0 years. The most common underlying disease was chronic obstructive pulmonary disease (n=103, 52.3%). Chest physicians prescribed LTOT using arterial blood gas analysis or a pulse oxymeter (74.6%), symptoms (14%), or a pulmonary function test (11.2%). The mean oxygen flow rate was 1.56${\pm}$0.68 L/min at rest, 2.08${\pm}$0.91 L/min during exercise or 1.51${\pm}$0.75 L/min during sleep. Most patients (98.3%) used oxygen concentrators. Only 19% of patients used ambulatory oxygen supplies. The oxygen saturation before and after LTOT was 83.18${\pm}$10.48% and 91.64${\pm}$7.1%, respectively. After LTOT, dyspnea improved in 81.2% of patients. The mean duration of LTOT was 16.85${\pm}$6.71 hours/day. The rental cost for the oxygen concentrator and related electricity charges were 48,414${\pm}$15,618 won/month and 40,352${\pm}$36,815 won/month, respectively. Approximately 75% of patients had a regular visit by the company. 5.8% of patients had personal pulse oxymetry. 54.9% of patients had their oxygen saturation checked on each visit hospital. 8% of patients were current smokers. The most common complaint with LTOT was the limitation of daily activity (53%). The most common complaint with oxygen concentrators was noise (41%). Conclusion: The patients showed good compliance with LTOT. However, only a few patients used an ambulatory oxygen device or had their oxygen saturation measured.