• Korea-Australia Rheology Journal
• /
• 제11권4호
• /
• pp.287-291
• /
• 1999

The tube model theory of entangled polymer presumes that the polymer chain holds its equilibrium contour length under certain conditions of flow; at times longer than a certain characteristic time, ${\tau}_k$, in the stress relaxation process following any flow history; in steady flow of rates smaller than ${{\tau}_k}^{-1}$; etc. Rheological phenomena associated with this presumption are discussed.

• 한국분무공학회지
• /
• 제8권1호
• /
• pp.23-28
• /
• 2003

When a cold HPSI (High Pressure Safety Injection) fluid associated with a design basis accident, such as LOCA (Loss of Coolant Accident), enters the cold legs of a stagnated primary coolant loop, thermal stratification phenomena may arise due to incomplete mixing. If the stratified flow enters a reactor pressure vessel downcomer, severe thermal stresses are created in a radiation embrittled vessel wall by local overcooling. Previous thermal-mixing analyses have assumed that the thermal stratification phenomena generated in stagnated loop of a partially stagnated collant loop are neutralized in the vessel downcomer by strong flow from unstagnated loop. On the basis of these reasons, this paper presents the thermal-mixing analysis results in order to identify the fact that the cold plume generated in the vessel downcomer due to the thermal stratification phenomena of the stagnated loop is affected by the strong flow of the unstagnated loop.

• 한국환경보건학회지
• /
• 제9권1호
• /
• pp.1-13
• /
• 1983

This study was carried out to investigate nitrification in the main stream of the Naktong river for two times, 12-13 August and 23-26 September 1982. The results of this study were as follows : 1. The increase of nitrogen concentration was due to inflow of Geumho river, which was polluted by the municipal and industrial wastewater of Daegu city. 2. The rate constant of ammonia calculated for three reaches was high according to the stream flow and was eminently low in the reach from Goroung to Gangjung. (0.068-0.116 $day^{-1}$). This phenomena might be attributed to the sublethal or even lethal effect upon aquatic life by relatively low DO concentration and high heavy metal concentration. 3. DO consumption rate by nitrification was highest for the reach from Goroung to Daeam where was affected by Geumho river. (56.7-147.8%). This phenomena might be attributed to low DO concentration and high nitrogen concentration. Especially, the less stream flow was, the higher DO consumption was. And so, nitrification in the station where is low DO concentration, especially under the low flow condition, might cause more serious water quality management problem. Therefore, for the purpose of effective conservation of water quality in the Naktong river, it was suggested that We have more concern about the nitrogen compound, and more study on the nitrification phenomena.

• 연구논문집
• /
• 통권24호
• /
• pp.107-117
• /
• 1994

In aerodynamic design of centrifugal compressors, impellers are designed through preliminary design and blade profile generation. In order to find out faults of the initially designed impellers, the detailed informations about internal flow phenomena such as pressure distribution, flow separation, blade loading, etc are essential. These informations can be acquired with flow measurements or computational flow analyses. In this study, we calculated 3-D viscous flow in 4 back-swept impellers which were designed in our laboratory, and analyzed the flow characteristics which influence the performance of impellers.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1643-1648
• /
• 2004

When a shock wave propagates into a Helmholtz resonator, very complicated wave phenomena are formed both inside and outside the resonator tube. Shock wave reflection, shock focusing phenomena and shock-vortex interactions cause strong pressure fluctuations inside the resonator, consequently leading to powerful sound emission. In the present study, the wave phenomena inside and outside the Helmholtz resonator are, in detail, investigated with a help of CFD. The Mach number of the incident shock wave is varied below 2.0 and several types of resonators are tested to investigate the influence of resonator geometry on the wave phenomena. A TVD scheme is employed to solve the axisymmetric, compressible, Euler equations. The results obtained show that the configuration of the Helmholtz resonator significantly affects the peak pressure of shock wave focusing, its location, the amplitude of the discharged wave and resonance frequency.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 춘계학술대회
• /
• pp.67-69
• /
• 2021

기상레이더 영상은 시각적인 측면에서 가시성이 높아 다양한 활용이 가능하다. 즉 기상레이더 원시자료뿐 아니라 영상의 변화 특성만으로도 기상 현상의 흐름을 파악할 수 있는 장점을 가지고 있다. 특히 영상처리기법이 기상 연구 분야에서도 점차 확대되고 있고 기상레이더 영상과 같이 높은 해상도를 가지는 영상자료의 경우 영상처리기법이라는 새로운 접근을 통해 유용한 정보 생산을 기대할 수 있다. 본 연구에서는 영상처리기법 중 하나인 광학 흐름(Optical Flow) 기법으로 일정 시간 간격에 따른 기상레이더 이미지의 변화에서 기상 현상 흐름을 벡터로 산출하였다. 기상 현상 규모에 적합한 벡터 분석 해상도, 기상레이더 영상이 존재하지 않는 영역의 벡터보간, 특정 기상 현상의 흐름과 대기 전체 흐름 구분을 위한 상대 흐름 벡터 제거 등을 통해 분석하고자 하는 기상 현상의 특성을 도출하였다. 본 연구를 통해 기상레이더의 원시 자료 활용뿐 아니라 영상자료 고유의 특성 활용이라는 기상레이더 활용 영역 확대와 영상처리기법의 향후 기상학 분야에서의 활발한 활용을 기대해 본다.

• 대한토목학회논문집
• /
• 제9권4호
• /
• pp.103-112
• /
• 1989

방사성 폐기물 처분장 주변의 지하수 유동 현상을 이해하기 위해 정상상태에서의 지하수 수치모델을 수립하였다. 지하수 수치모델은 절점과 부재로 구성된 network에 의해 균질, 비균질, 다층매질에서 지하수 흐름을 조사하는데 이용되었고 모델의 수치해는 해석해와 일치하는 결과를 가졌다. 또한 지하매질의 수리학적 특성과 균열지역의 영향에 의한 지하수 유동의 물리적 변화현상도 조사되었다. 처분장 주변의 지하매질에 대해 구성된 network과 계산된 지하수 속도의 방향을 이용하여 지하수의 가능한 이동경로를 산정하는 방법이 개발되어 방사성 폐기물 처분장에서 생태계로의 가능한 지하수의 이동속도 및 시간을 예측하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.619-622
• /
• 2002

It has been recognized that the flow in the blade passage of an axial turbomachinery rotor is very complex and is influenced by various flow phenomena, of which the tip leakage flow passing through the gap between rotor blade tip and casing plays a significant role. The losses produced due to the existence of the clearance have been known to be a large contributor of the rotor overall losses. Despite several experimental studies on non-rotating blade in the cascade configuration, and on actual rotating blades, the detailed nature of the complex flow phenomena associated with tip leakage, however, remains largely unresolved. Thus, a single-stage compressor test rig was built and measurements were taken at upstream and downstream of the rotor of this compressor at the aerodynamics laboratory of University of New South Wales. A five-hole probe and a hot-wire probe were used to measure mean and fluctuating flow parameters. The results show that tip leakage losses rise rapidly beyond tip gap of 0.01 Furthermore, the present project also identifies the regions in the wake behind the rotor of the axial compressor where such losses are concentrated. These results should be useful in the better design of rotors for improved performance of axial compressor.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권4호
• /
• pp.437-442
• /
• 1997

An experimental study was carried out in a channel cavity with square heat surface by visual¬ization equipment with Mach - Zehnder interferometer and laser apparatus. The image processing system consists of one commercial image board slit into a personal computer and 2-dimensional sheet light by Argon-Ion Laser with cylindrical lens and flow picture recording system. Instant simultaneous velocity vectors at whole field were measured by 2-D PIV system which adopted two¬frame grey-level cross correlation algorithm. Heat source was uniform heat flux(o.4W/cm$^2$, , O.8W/cm$^2$, 1.2W/cm$^2$). Obtained result showed various flow patterns such as kinetic energy distribution. Severe unsteady flow fluctuation within the cavity are remarkable and sheared mixing layer phenomena are also found at the region where inlet flow is collided with the counter-clockwise rotating main primary vortex. Photographs of Mach ~ Zehnder are also compared in terms of constant heat flux.

• 대한기계학회논문집B
• /
• 제25권3호
• /
• pp.285-295
• /
• 2001

The transport phenomena in a wedge-shaped pool of twin-roll continuous caster are affected by the various operating parameters such as the melt-feed pattern, roll-gap thickness, melt-superheat, and casting speed. A computer program has been developed for analyzing the two-dimensional, steady conservation equations for transport phenomena during twin-roll continuous casting process in order to estimate the turbulent melt-flow, temperature fields, and solidification in the wedge-shaped pool. The turbulent characteristics of the melt-flow were considered using a low-Reynolds-number K-$\xi$ turbulence model. Based on the computer program, the effects of the different melt-feed patterns, roll-gap thicknesses, and superheats of melt on the variations of the velocity and temperature distributions, and the mushy solidification were examined. The results show that the liquidus line is located considerably at the upstream region, and in the lower region appear the well-mixed melt-flow and most widely developed mushy zone. Besides, the variation of melt-flow due to varying melt-feed patterns, affects mainly the liquidus line, and scarcely has effects on the solidus line in the outlet region.