• 지식경영연구
• /
• 제10권2호
• /
• pp.49-63
• /
• 2009

In this study, sub domain of flow was investigated on literature survey, and suggested of the measuring method of web-site flow and its simulation analysis. Constructing of measuring method of flow, and using this method what-if analysis was simulated when several condition changed. Using causal map approach to extract knowledge from web-site domain experts and to derives a causal relationship of knowledge. Specially, in our study, describes method of developing and building causal map, and suggests guide line of this method on practical application. This research results show that web-site flow starts "direct searching" or "interesting of special issue(domain)", and when challenges of web-site were accorded with user's skills web-site flow grows. Further, in the web-site, information searching intention results in increase of user's duration time and experience flow to discovery new interesting issues in this process. If user's web-site of interaction is increased, awareness of environment conditions decreased, finally, user's telepresense results in increased web-site flow. This paper contained thai this method make used of measuring flow in the web-site and developing of practical strategy.

• 한국인터넷방송통신학회논문지
• /
• 제11권3호
• /
• pp.129-135
• /
• 2011

본 논문에서는 2D 동영상을 3D 입체영상으로 변환하기 위해서 머신러닝에 의한 학습기반의 객체분할과 객체의 optical flow를 활용하는 방법을 제안한다. 성공적인 3D 변환을 가능하게 하는 객체분할을 위해서, 객체의 칼라 및 텍스쳐 정보는 학습을 통해 반영하고 움직임이 있는 영역 위주로 객체분할을 수행할 수 있도록 optical flow를 도입한 새로운 에너지함수를 설계하도록 한다. 분할된 객체들에 대해 optical flow 크기에 따른 깊이맵을 추출하여 입체영상에 필요한 좌우 영상을 합성하여 생성하도록 한다. 제안한 기법으로 인해 효과적인 객체분할과 깊이맵을 생성하여 2D 동영상에서 3D 입체동영상으로 변환됨을 실험결과들이 보여준다.

• Journal of Mechanical Science and Technology
• /
• 제18권2호
• /
• pp.286-293
• /
• 2004

The air fuel ratios of current gasoline engines are almost controlled by several air flow meters. When CVVT (Continuous Variable Valve Timing) is applied to a gasoline engine for higher engine performance, the MAP (Manifold Absolute Pressure) sensor is difficult to follow the instantaneous air fuel ratio due to the valve timing effect. Therefore, a HFM (Hot Film Flow Meter) is widely used for measuring intake air flow in this case. However, the HFMs are incapable of indicating to reverse flow, the oscillation of intake air flow has an negative effect on the precision of the HFM. Consequently, the various duct configurations in front of the air flow sensor affect the precision of HFM sensitivity. This paper mainly focused on the analysis of the reverse flow, flow fluctuation in throttle upstream and the geometry of intake system which influence the HFM measurement.

• 충청수학회지
• /
• 제15권2호
• /
• pp.67-72
• /
• 2003

The purpose of this paper is to prove flow induced by a covering map. Lee and Park had studied semiflows induced by a covering map in 1997 [1]. This proof differs from the proof of Lee and Park. Notice that for the proof of this paper, we use the fact that $\mathbb{R}$ is connected space.

• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.2189-2196
• /
• 2015

Stereo matching algorithm is usually used to obtain a disparity map from a pair of images. However, the disparity map obtained by using stereo matching contains lots of noise and error regions. In this paper, we propose a virtual-view synthesis algorithm using disparity refinement in order to improve the quality of the synthesized image. First, the error region is detected by examining the consistency of the disparity maps. Then, motion information is acquired by applying optical flow to texture component of the image in order to improve the performance. Then, the occlusion region is found using optical flow on the texture component of the image in order to improve the performance of the optical flow. The refined disparity map is finally used for the synthesis of the virtual view image. The experimental results show that the proposed algorithm improves the quality of the generated virtual-view.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.957-963
• /
• 2008

The refrigerant-induced noise of the air conditioner is one of the irregular noises which occurs at the indoor unit. Because the air-conditioner makers are always trying to reduce the sound pressure level radiated from indoor unit, reducing the refrigerant-induced noise at low cooling mode is very important problem. But it is very difficult to estimate whether the refrigerant-induced noise occurs or not before it becomes problem. In this paper, a method to predict the refrigerant-induced noise is suggested using flow pattern map. It is estimated that the irregular noise from the refrigerant comes from the slug flow in a pipe.

• 한국인터넷방송통신학회논문지
• /
• 제18권6호
• /
• pp.11-19
• /
• 2018

최근 GIS(Geographic Information System)을 중심으로 다양한 정보를 지도위에 제공하고 있으며, 대표적으로 국외의 경우 구글맵, 오픈스트리트맵, 빙맵 등이 있고, 국내의 경우 네이버지도, 다음지도, 브이월드맵 등이 GIS 기술의 한 부분인 WMS(Web Map Service)를 이용하여 서비스를 제공하고 있다. 본 논문에서는 현재 서비스되고 있는 벡터장 데이터 정보를 이용하여, 조류의 흐름도 와 스트림라인의 표출 방안 알고리즘 연구 및 사용자 편의성을 고려한 해양예측모델 데이터의 가시화 방안에 대해 연구를 수행하였다. 기존의 조류 흐름도 표출 및 스트림라인 표출 알고리즘과 제안하는 방식의 성능을 비교를 하여, 기존의 기술 보다 2배 이상 빠른 표출이 되는 것을 확인하였다.

• 대한기계학회논문집B
• /
• 제32권11호
• /
• pp.863-869
• /
• 2008

This paper investigated the new calibration algorithm of a straight-type five-hole pressure probe for measuring three-dimensional flow velocity components. This new calibration algorithm was used for velocity data reduction from the calibration map and based on the combination of a look-up, a binary search algorithm and a geometry transformation including the translation and reflection of nodes in a calibration map. The calibration map was expanded up to the application angle, ${\pm}55^{\circ}$ of a probe. This velocity data reduction method showed a perfect performance without any kind of interpolating errors in calculating yaw and pitch angles from the calibration map. Moreover, when it was applied to an actual flow field including a swirling flow, a good result came out on the whole.

• 한국산학기술학회논문지
• /
• 제12권4호
• /
• pp.1897-1903
• /
• 2011

본 논문은 2D/3D 변환을 위한 객체 추출과 깊이정보(Depth-map) 생성기법에 관한 연구이다. 2D영상을 3D로 변환하기 위해서는 영상 객체 추출, 영상 거리 인식, 영상 생성, 재보정 단계를 거치게 되는데 본 논문에서는 영상 객체 추출과 영상 거리 인식에 해당하는 깊이정보를 생성하는 방법을 제안한다. 3D 영상으로의 변환은 2D 영상에서의 객체 추출과, 추출된 객체와 주변 배경을 구별하기 위한 거리감을 할당하는 깊이정보 생성이 중요하다. 보다 정확한 객체 추출과 깊이정보를 생성하기 위해 기존의 Optical flow에서 잡음을 제거한 방법을 제안하였다. 제안한 방법으로 2D 영상을 깊이정보가 포함된 영상으로 변환하여 영상의 깊이 정보가 추정됨을 알 수 있다.

• 한국환경과학회지
• /
• 제24권6호
• /
• pp.807-817
• /
• 2015

In this study the urban atmospheric environment map in Busan was made and it consist of the atmospheric environment element map and the atmospheric environment analysis map. The atmospheric environment element map covered the topography, the urban climate, the air pollutant emission, ozone and PM10 concentrations in Busan and the atmospheric environment analysis map included the thermal environment and the wind flow by using WRF meteorological numerical simulation. The meteorological elements from 2007 to 2011 in Busan were used in this study. As a result, in the center of Busan and Buk-gu along to the Nakdong river was the temperature high. To analyze the air flow of Busan 3 clusters depending on the wind direction were extracted with the cluster analysis. The results of the analysis on the detailed wind field of each cluster showed that the weak ventilation could be happened locally at the specific meteorological condition.