• 한국건설관리학회논문집
• /
• 제10권5호
• /
• pp.123-134
• /
• 2009

1970 년대 이후, 우레탄 도막방수공법은 자외선에 강하고 탄성 및 수밀성이 뛰어나 지붕 및 지하바닥, 스포츠경기장 등에 널리 활용되고 있다. 그러나 옥상 및 지하공간은 미끄럼으로 인한 위험이 많고 다양한 외력으로 하자발생이 빈번하여, 미끄럼방지기능 및 내구성을 향상시켜야 하고 사용자의 편의성 및 심미적 측면의 기능성을 고려한 우레탄 도막방수공법의 개발이 절실하다. 따라서 기존 우레탄의 장점을 유지하고 성능 및 기능을 향상시킨 다양한 공법이 개발되고 있으며, 최근에 엠보스프레이 코팅시스템(Embo spray coating system)을 활용한 엠보탄(Embo-thane) 도막방수공법이 개발되었다. 본 논문은 엠보탄 도막방수공법의 노출 비노출 바닥재에 대하여 살펴보고 기존의 우레탄 도막방수공법과의 성능 및 기능에 대한 객관적 비교 분석을 실시하기 위하여 인장강도, 신장률, 부착성능, 내마모성, 미끄럼저항성능에 대한 실험적 연구를 실시하였다. 그리고 엠보탄 방수공법의 물리적 성능뿐만 아니라 공법의 설계적 측면을 고려한 평가기준항목 설정과, AHP(Analytic Hierarchy Process)기법을 활용한 VE(Value Engineering)분석을 실시하여, 엠보탄 도막방수공법이 기존의 우레탄 도막방수공법에 비교하여 성능 및 기능에 대한 개선정도를 성능점수(performance index)를 통하여 제시하였다. 또한, 불확실성이 고려된 결과에 대한 평가를 위하여 Monte Carlo Simulation기법을 활용하여 확률적 접근방법을 통한 신뢰도 분석을 실시하고자한다.

• Journal of Periodontal and Implant Science
• /
• 제45권6호
• /
• pp.238-246
• /
• 2015

Purpose: The purpose of this study was to evaluate bone formation around recombinant human bone morphogenetic protein (rhBMP-2)-coated implants placed with or without absorbable collagen sponge (ACS) in rabbit maxillary sinuses. Methods: The Schneiderian membrane was elevated and an implant was placed in 24 sinuses in 12 rabbits. The space created beneath the elevated membrane was filled with either blood (n=6) or ACS (n=6). In the rabbits in which this space was filled with blood, rhBMP-2-coated and non-coated implants were alternately placed on different sides. The resulting groups were referred to as the BC and BN groups, respectively. The AC and AN groups were produced in ACS-grafted rabbits in the same manner. Radiographic and histomorphometric analyses were performed after eight weeks of healing. Results: In micro-computed tomography analysis, the total augmented volume and new bone volume were significantly greater in the ACS-grafted sinuses than in the blood-filled sinuses (P<0.05). The histometric analysis showed that the areas of new bone and bone-to-implant contact were significantly larger in the AC group than in the AN group (P<0.05). In contrast, none of the parameters differed significantly between the BC and BN groups. Conclusions: The results of this pilot study indicate that the insertion of ACS after elevating the Schneiderian membrane, simultaneously with implant placement, can significantly increase the volume of the augmentation. However, in the present study, the rhBMP-2 coating exhibited limited effectiveness in enhancing the quantity and quality of regenerated bone.

• 대한건축학회논문집:구조계
• /
• 제35권12호
• /
• pp.149-156
• /
• 2019

Recently, skyscraper building and apartment fires, which were rapidly spread out from a low floor to a rooftop, have become a frequent occurrence in mass media. This fire problems have a fatal disadvantage that the exterior wall finish of the building emits toxic gas in case of fire by using dry bit method or organic insulating material. Therefore, in order to remedy these problems, many exterior wall finishing construction methods have been proposed, but the current trend is to use existing construction methods due to problems such as economy, weight, and durability. On the other hand, in countries such as Germany and Japan, ceramic sidings are used as exterior finishing material for buildings, which is environmentally friendly, excellent natural beauty, long life, easy maintenance and high-quality exterior materials. However, those ceramic sidings have still the problems such as manufacturing cost and weight problem because of boosting the sintering temperature up to 1,350℃ or more. Also, conventional CRC, MgO, FRP sidings which are composed of pulp, glass fiber and organic materials, have been reports of deformation due to ultraviolet rays, discoloration, corrosion and scattering, surface rupture, lifting and peeling. Therefore, in this study as an alternative to solve this problem, halosite nano kaolin produced in Sancheong in Korea and frit flux were used to satisfy the required properties as ceramic siding using low temperature sintering (below 1,000℃) and lightweight materials such as pearlite. This study aims to design the optimal formulation and process of materials and to study the characteristics of nano-coated ceramic siding material development and to present relevant basic data. The findings show that ceramic siding for nanocoated building materials is excellent as a natural ceramic siding building material. The fire resistance of natural minerals and nano particle refining technology satisfy the bending strength of 80kgf / cm2, the volume ratio of 2.0 and the absorption rate of less than 10.0%.

• 한국산업보건학회지
• /
• 제18권3호
• /
• pp.224-238
• /
• 2008

The aim of this study is to confirm the physicochemical property and hazard of thinner (012), which is a diluent of enamel paint used for floor coating for waterproofing and oil painting for the outer wall. The literatures of physicochemical property and hazard of thinner were surveyed and its physicochemical property were evaluated. And then, the inhalation toxicity of thinner affecting the central nervous system and reproductive organs in rats were examined by subchronic (6 h./day. 5 days/ week for 13 weeks) inhalation test. 1) According to the 13-week subchronic inhalation test, there were no significant changes in clinical test and body weight. However, a significant evidence of toxicity was observed in the hematological test and organ weight such as heart, kidney, liver and brain (p<0.01) in the 200 ppm and 1,000 ppm exposure groups in a dose response manner. In the histopathology analysis, there were no significant evidence of toxicity. Therefore, thinner was not classified as an organ targeted toxic agent. In case of Harmfulness, it could be classified as a chronic toxic agent 3($500 ppm/4hr, rat). 2) The reproductive toxicity such as extension of the period of estrous cycle, reduction of serum estradiol concentration and increase of frequency of the abnormal sperm was observed in the 1,000 ppm exposed animals. 3) The result of the physicochemical property of the test material showed that the specific gravity was 0.793, boiling point $155.8^{\circ}C$, steam pressure 2.1 kPa, ignition point $34.5^{\circ}C$, and spontaneous ignition point $280^{\circ}C$. The endothermic and exothermic values were 371.4 J/g and 159.1 J/g. respectively. The explosion limit was 214 mg/l. These data showed that thinner could be classified as an explosion agent level 1.2 and ignitive liquid agent 3 ($23-60^{\circ}C$) according to the notification No. 2008-1 of the Labor Ministry, "Classifying Standard of Chemical Materials."

• 한국화재소방학회논문지
• /
• 제34권2호
• /
• pp.94-96
• /
• 2020

2013년 11월 한국의 농촌 주택에서 발생한 여성 신체의 지속적인 연소 사례가 제시된다. 여성의 신체 중 무릎에서 목 부분까지는 거의 완전하게 소각되었고 머리, 팔, 무릎 아래의 다리 및 발은 거의 연소되지 않은 상태로 발견되었다. 외부 점화원으로는 성냥에 의한 불씨가 가장 유력했다. 거실 바닥에서 발견된 할머니만 주로 연소되었으며, 주택 안에 있는 다른 사물들은 검갈색의 기름이 묻은 것처럼 또는 기름으로 코팅된 것처럼 보였으며 사실상 거의 연소되지 않았다. 변사자의 타지 않은 의류 및 양말에서 인화성 물질이 검출되지 않았으며, 근육 조직에서 약독물 성분 또한 확인되지 않았다. 말초 혈액의 혈중일산화탄소-헤모글로빈 농도는 11%, 안방수의 에틸알콜농도는 0.010% 미만이었다. 부검 결과 탄화가 고도로 진행되어 사망원인을 단정하기 어려웠다.

• 설비공학논문집
• /
• 제27권7호
• /
• pp.369-374
• /
• 2015

This study analyzed analyzes the energy performance of six houses in Daejeon completed which were built in 2011. Observed The observed houses, which were all designed and constructed inof the same size and structure, are were highly insulated with triple Low-E coating windows; the insulation level of the walls is was $0.13W/m^2K$ and that of the roof is was $0.10W/m^2K$. As electric houses, all of the energy supplied to the houses, including for cooking, is was supplied by electricity. A and 3~4 kWp of photovoltaic system and a 3~5 kW of ground source heat pump (GSHP) were installed in each house tofor providing provide space heating/and cooling and hot water are installed. We constructed a Web-based remote monitoring system in order to understand energy consumption and the dynamic behavior of the energy system. T, and the results of our metering data analysis of 2013 are as follows. First, the annual residential energy consumption is was 4,400 kWh (${\sigma}=1,209$) and GSHP energy consumption is was 5,182 kWh (${\sigma}=1,164$). Second, residential energy consumption ranked highest in average energy usage, with at 45% of the total, followed by heating with at 30%, hot water supply with at 17% and cooling with at 6%. Third, the average energy independence rate is was 51.8%, the GFA (Gross gross floor area) criteria average energy consumption unit is was $48.7kWh/m^2yr$ (${\sigma}=10.1$), and the net energy consumption unit (except the energy yield of the PV systems) is was $24.7kWh/m^2yr$ (${\sigma}=8.8$).

• 한국산학기술학회논문지
• /
• 제20권4호
• /
• pp.489-496
• /
• 2019

본 논문은 철도차량 및 자동차용 패널의 진동 및 소음억제용으로 사용되는 감쇠 처리재의 감쇠특성 평가에 관한 연구이다. 감쇠재의 모드별 매개변수들을 구하기 위해 다른 종류의 PVC를 알루미늄과 철계 빔위에 도포한 시편을 제작하여 가진시험을 수행하였다. 시편은 10 Hz부터 1,000 Hz까지의 주파수 대역을 조화력으로 가진하여 가속도계로 전달 모빌리티값을 측정하였다. 감쇠계수는 몇 가지 이론인 반력법, 최소 탄젠트오차법 및 최소 각오차법 조합법과 위상변화법을 모드 원호곡선 맞춤과 최소자승오차법을 사용하여 작성한 통합 프로그램을 이용하여 평가하였다. 감쇠값이 비교적 낮고 측정값이 선형인 경우는 어느 방법을 사용해도 되나, 감쇠값이 높거나 측정값에 비선형특성이 있는 경우에는 최소 각오차법이 감쇠계수 측정오차를 줄일 수 있다. 도포 감쇠재의 동적특성 평가로부터 구한 재료의 물성값은 차체나 철도차량 하부 기기함과 같이 복잡한 구조물의 소음해석을 위한 유한요소법에 사용할 수 있다. 빔 시험에서 수행한 모드별 감쇠계수의 특성 평가 결과 2차 이상 모드의 주파수 대역에서 감쇠 효과가 크기 때문에 구조소음억제에 유용할 것으로 사료된다.