• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.60-63
• /
• 1997

Recently, factory automation and shop floor control system need a web based remote monitoring technology to control effectively machine tool. This paper describes a web based remote monitoring system which is concerned with open architecture controller for machine tool. The environment of this system consists of a lot of elements such as web server, database, machine tool, pc based controller, client computers and script programs, also which is interconnected by network including intranet or internet. Designed script programs, also which is interconnected by network including intranet or internet. Designed script program service current status and faults information of machine to remote users who want to monitor machine tool. Additionally those have various functions to service we board for q&a, downloading data and information of after-service managers.

• Fire Science and Engineering
• /
• v.15 no.3
• /
• pp.36-43
• /
• 2001

Several types of widely used interior upholsteries including wallpaper, veneer board and floor cover, were selected to be evaluated by using the method of NES 713 text. Test results indicates that a fire with retardant wallpaper release a large amount of toxic gases when constantly exposed to a fire source. When evaluated in terms of the masses of released gases, the release of Carbon monoxide appears the highest in case of wallpaper fire, while the ratio of CO/Mass loss appears the highest in case of floor cover fire. Therefore, it can be concluded that, a large amount of toxic gas will release from a floor cover fire with even a small quantity of fuel.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2009.09a
• /
• pp.93-96
• /
• 2009

Foundation structure for the main engine heavy spare parts in the engine room is susceptible to resonance problem due to outfitting weight. In addition the deck floor has a large opening for the main engine installation and maintenance, which further weakens the foundation structure. To reinforce the weak structure, two types of approaches have been used; 1) insert an H-pillar below or above the floor and 2) increase the stiffener size. In this paper, the H-pillar approach is used to solve the vibration problem of the foundation structure in the engine room opening area. A commercial program is used to analyze the vibration problem ad to find the location and the size of the H-pillar. Modal test at the quay and on-board vibration measurement during the sea trial have confirmed the validity of inserting an H-pillar below the floor.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.947-951
• /
• 1995

Cim realization for the machinery manufacturing plant has several problems such as a lack of the adaptibity for system integration of the production machines, a lack of the flexibility for the information flow and a lack of the interchangeability fot the variety of the interchange information. In the paper the development of VMD for the object oriented machine tool in Cim enviroment is accomplised. FOr this purpose VMD is constructed in PC with NT 3.51/OS enviroment by using the exculsive comunication board and PLC for the conventional CNC machine tool that VMD support is not available. And also RS232 interface between VMD and CNC's and DNC 2 comunication board supplied by FANUC for two types of CNC are used. This developed VMD is very useful for CIM construction in the shop floor having the multi-vendor CNC controllers.

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.525-543
• /
• 2010

Testing and validation processes are critical tasks in developing a new hardware platform based on a new technology. This paper describes a series of experiments to evaluate the performance of a newly developed MEMS-based wireless sensor node as part of a wireless sensor network (WSN). The sensor node consists of a sensor board with four accelerometers, a thermometer and filtering and digitization units, and a MICAz mote for control, local computation and communication. The experiments include calibration and linearity tests for all sensor channels on the sensor boards, dynamic range tests to evaluate their performance when subjected to varying excitation, noise characteristic tests to quantify the noise floor of the sensor board, and temperature tests to study the behavior of the sensors under changing temperature profiles. The paper also describes a large-scale deployment of the WSN on a long-span suspension bridge, which lasted over three months and continuously collected ambient vibration and temperature data on the bridge. Statistical modal properties of a bridge tower are presented and compared with similar estimates from a previous deployment of sensors on the bridge and finite element models.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.180-181
• /
• 2022

The higher the addition rate, the less difference in kneading was found. This is because most of the cases are mixed with vinyl gloves by hand when immediately mixed in the field, so there is no problem of mixing dough according to the amount of addition. The mean increase temperature for 20 minutes was 31.6℃ for Plain, 38.1℃ for Al, 33.7℃ for Cu, and 5~7℃ for Al 20% added sample, 38.1℃ for Al 20% added sample, but 36.6℃ for Al 5% added sample. This suggests that it is possible to improve its own heat transferability by adding metal powder to epoxy adhesives.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.4
• /
• pp.29-38
• /
• 1997

The effect and control of wood property of reconstituted composite panels for improved board properties by wood-waste materials and development of combination method for heterogeneous materials have been of interest to the wood science researchers. The purpose of this study is to consider the properties in relation to hot pressing conditions and to develope the optimum hot pressing condition with waste wood and waste tire for the manufacturing of composite boards. The study of composite boards for recycling of wood and waste tire is nothing up to the present. Physical and mechanical properties such as specific gravity, moisture content, swelling coefficient, modulus of rupture and modulus of elasticity in bending test were studied. The condition of 3-stage press time for the lowest moisture content of composite board was $4{\rightarrow}3{\rightarrow}3$ minutes. Specific gravity of composite panels was affected mainly by the amount of rubber chip. Because of the low rigidity and high elasticity in rubber chip, it is considered the composite panel was adequate material in the place of compression load, but not bending load. Therefore, it was concluded that a use of rubber-based wood composite panel is proper to the interior materials such as floor a room than exterior materials. From the test results, the most optimum hot pressing conditions were $4{\rightarrow}3{\rightarrow}3$ minutes for 3-stage press time and $45{\rightarrow}20{\rightarrow}5kg/cm^2$ for 3-stage press pressure. The rubber-based wood composite panel was very excellent in elasticity by combination of rubber chip in comparison with existing other wood-based materials. Therefore, it was considered that rubber-based wood composites can be applicable to every interior materials such as floor a room and will be expected to effective reuse and recycle of waste tires and wood-waste materials, and will be contribute to protection of environment pollution in earth.

• KIEAE Journal
• /
• v.16 no.4
• /
• pp.41-46
• /
• 2016

Purpose: This is a study on the planning of temporary housing for post application of Mega Sports facilities. The subject of the study is 2018 Pyeongchang Winter Olympics, which is to suggest building an alternative temporary housing using shipping containers(high cube), which solve the lack of accommodations and recycle temporary housing after Olympics, save money and be eco-friendly in Olympics. Method: This study includes this ; research on the a fact-finding survey about Mega sports facilities post application and demand survey on 2018 Pyeongchang Winter Olympics accomodations and an analysis about temporary housing plan. Furthermore we decided temporary housing building plan by analyzing residents' needs and traits of the housing etc. Through this, we made a schematic design for household units. Result: As a result, this study is a plan of making space, forms, and structure. The planned size is $38.4m^2$(L:12m, W:3.2m) except balcony, and indoor height is 2.5m. The space consists of entrance, bathroom, bedroom and living room with folding furniture system. Also there's a detailed floor plan of the ceiling, wall, and floor we drew up. The ceiling and wall consist of dampproof film, noncombustible board, fire proof urethane form, and color-designed sheet. The floor is composed of floor tile, cement mortar, light concrete(with heat coil), insulation, and dampproof film. Additionally, this study is a plan of interior dry wall with detail using modular construction method for work efficiency and quality improvement.

• Journal of Industrial Convergence
• /
• v.20 no.11
• /
• pp.197-203
• /
• 2022

The purpose of this study is to establish an S.I. (Space Identity) considering the spatial location and cultural specificity of Jecheon Jungang Market, the oldest and largest market in Jecheon with historical characteristics. To this end, we identify the flow of the cultural tourism market, investigate and analyze the current state of Jecheon Central Market, and present a direction based on storytelling for each space. The concept of space design was divided into space, time, people, and culture as coexistence, and merchants, products, and shopping malls share temporality and coexist in one space. Therefore, the facilities for each floor consisted of a gate, information board, lighting, rest area, design bench facility, information center, business compliance line, floor sign, and gate floor sign for each floor. Through this, it is necessary to establish a mid- to long-term development strategy by establishing a step-by-step promotion strategy to predict the economic effect of creating new demand and increasing sales in Jecheon Central Market.

• Journal of the Korean Home Economics Association
• /
• v.38 no.11
• /
• pp.137-149
• /
• 2000

The Purpose of this study was to investigate actual condition about the modem adaptation of interior elements(floor, wall, ceiling, door & window) in traditional thatched roof house. The examined objects were interior space of 36 restaurants and cafes in Seoul and Kyung-Ki Do area. 1. Floor: Jang-pan was mostly alternated with linoleum which huts Jang-pan pattem. Wumul-maru was adapted from the original and Jang-maru was alternated with wood or linolium which has western state Jang-maru pattern. Mud was adapted from the original or alternated with slate stone or rough finish cement. 2. Wall: Rice proper was alternated with rice paper book witch has chinese character, paper for parcels or modem wall paper. Plaster-white paint or white handy coat. Mud-mud color paint or bamboo stick witch located in the mud wall orginal. Log-half cut log. Wooden board-without cross bar or irregular form. 3. Ceiling: Yondung-Chongang was mostly adapted from the original and Banja-Chonjang was alternated with rice paper book which has Chinese character or modem wall paper. 4. Door and Window: Ttisal-mun and Panjang-mun were adapted from the original. Wan and A’character door and window were simplified character itself.