• Journal of Ocean Engineering and Technology
• /
• v.31 no.4
• /
• pp.308-314
• /
• 2017

The purpose of this study was to investigate the sea floor using a seismic profiler in the northern part of Chagwi-do of Jeju Island in order to select the optimal location for the 60-m-class berth of a sea test bed for wave energy converters and provide basic environmental data for designing a suction anchor. The echo types of the seismic profiles were classified based on the study of Kim et al. (2016a), and the location for installing the suction anchor was selected based on a sediment thickness of more than 10 m. The physical properties of the surface sediments were determined by analyzing the sediment samples obtained from 16 grab sample points. Based on the investigation and analysis, we proposed a survey area in the North-Eastern sea as an optimum location for the 60-m-class berth where the suction anchor could be installed.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.4
• /
• pp.52-59
• /
• 2023

Flatness inspection of PC elements is normally conducted manually by inspectors at manufacturing sites. However, the manual inspection is error-prone and subjective, so it is necessary to develop a robust and efficient flatness measurement method. Recently, a few studies of laser scanner-based flatness inspection have been conducted. However, little attention on field applicability in terms of accuracy, time and cost has been paid. To tackle the limitation, this study aims to compare three sensing method including floor profiler, terrestrial laser scanner and total station for flatness inspection of PC elements. A series of experiments on two full-scale PC slabs were conducted and the results show that the laser scanning method is the most suitable for the PC elements flatness inspection in the aspects of accuracy, time and cost.

• The Korean Journal of Petroleum Geology
• /
• v.10 no.1_2 s.11
• /
• pp.18-22
• /
• 2004

To identify and interpret the distribution and the characteristics of the gas hydrate layers in the Ulleung Basin, we have surveyed and gathered the multi-channel seismic data, Chirp sub-bottom profiler, SeaBeam and 12 m piston core samples since 1996. In previous works, high-resolution seismic profiles showed acoustic anomalies such as acoustic void, acoustic turbidity and pock mark which indicate the presence of gas-charged sediments. The patterns of horizontal degassing cracks originated from free methane expansion is the strong indicator of shallow gas-charged sediments in the core samples. The observation of submarine slides and slumps from destabilizing the sediments in the southern part of the Ulleung Basin may also point out that the gas had been released from gas hydrate dissociation during lowstand of sea level. The multi-channel seismic data show BSR, blanking and phase reversal. The gas hydrate layers above which large-scale shallow gases are distributed exist at the depth of about 200 m from the sea-floor with water depth of 2,100 m. From the interpretation of seismic sections in the southern Ulleung Basin, gas hydrate layers occur in the Pleistocene-Holocene sediments. These gas-charged sediments, acoustic anomalies and BSR may be all related to the existence of gas hydrate layers in the study area.